TSC series carbide radius end mill, 4-flute, 45° spiral / stub model (SNR-TSC-CR-HEM4B8-R1-[17-51/1]-[5-12/1])
- Remise sur volume
Détails du produit:
Référence fabricant: SNR-TSC-CR-HEM4B8-R1-[17-51/1]-[5-12/1]
Marque: MISUMI
Prix: Veuillez contacter le service d'assistance pour obtenir un devis
Délai de livraison: 7 jours
Données techniques:
Outer Diameter (D): 8 φ
R Size: 1 mm
Flute Length (ℓ): 5 ～ 12 mm
Overall Length (L): 75 mm
Shank Diameter (d): 8 mm
- TS
- General Steel
- 4 Flutes
- B (Stub)
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
SNR-TSC-CR-HEM4B8-R1-[17-51/1]-[5-12/1]
Référence pièce
|
|---|
| SNR-TSC-CR-HEM4B8-R1-[17-51/1]-[5-12/1] |
| Référence pièce | Quantité minimale de commande | Remise sur volume | Outer Diameter (D) (φ) | R Size (mm) | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 jours | 8 | 1 | 5 ～ 12 | 75 | 8 | 17 ～ 51 | Cutting Edge R Processing | 2 |
Loading...
Spécifications
Model Number
TSC-CR-HEM4B (Stocked Product) / T-TSC-HEM4B (Manufactured Product)
| Outer Diameter D |
Radius | R Select | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | ● Stocked Product □ Manufactured Product |
| CR 0.1 mm Increment Designation |
|||||||
| 3 |
0.5 |
4.5 | 60 | 6 | 1 | ● | |
| 4 |
0.5 |
6 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 5 |
0.5 |
7.5 | 60 | 6 | 1 | ● | |
| 0.1 ~ 0.4 | □ | ||||||
| 6 |
0.5 |
9 | 60 | 6 | 2 | ● | |
| 0.1 ~ 1.0 | □ | ||||||
| 8 |
1 |
12 | 75 | 8 | 2 | ● | |
| 0.1 ~ 1.5 | □ | ||||||
| 10 |
1 |
15 | 80 | 10 | 2 | ● | |
| 0.1 ~ 2.0 | □ | ||||||
| 12 |
1 |
18 | 100 | 12 | 2 | ● | |
| 0.1 ~ 2.5 | □ | ||||||
| 16 | 0.1 ~ 3.0 | 24 | 110 | 16 | 2 | □ | |
[ ! ]The flute length (ℓ) and total length (L) are approximately D x 0.5 shorter (up to approximately 5 mm) for manufactured products.
[ ! ]Manufactured products do not have a coating. Refer to >>Click here. for information about re-coating during additional processing.
For Cutting Conditions, Refer to >>Click here.
Plus d'informations
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and ideal for high speed machining / dry machining.
● A multi-functional end mill product with added curvature.
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth.
● Compared to 30° twisted square end mills, both rotation and feed capacity are more than double for higher speed machining.
● The radial blade tip is useful to prevent chipping.
● Has a stubby blade with a length 1.5 times greater than the blade diameter, suppressing chatter while machining bottom surfaces.
Informations de base
| Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Acier inoxydable / Fonte / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Radius |
|---|---|---|---|---|---|
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Inclined Cutting | Coating | For High Hardness (Silicone-Based) | Torsion Angle (θ) | Powerful Helix (45° to 60°) |
| R Precision(μm) | ±0.01 |
Configurer
Propriétés de base
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Cutting Edge R Processing
- Standard Neck Relief
- Stocked Product
-
Type
- SN-TSC-CR-HEM4B
- SNR-TSC-CR-HEM4B
- TSC-CR-HEM4B
Filtrer par jours d'expédition standard
-
- Tous les articles
- 5 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.