Swivel ball joints
- En promotion
- Remise sur volume
Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no.1).
The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above.
For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.
Référence pièce
Vous pouvez trouver ici le numéro
de référence lié au produit recherché.
GN 784 / Swivel Ball Joints, Aluminum
Information
GN 784 Swivel ball joints allow precise and variable adjustment of the ball pivot within the rotation range. This is a particular advantage when adjusting scanners, cameras, lighting, monitors, etc.
Thanks to the efficient clamping mechanism, only small amounts of torque on the clamping screw result in comparatively strong clamping pressure on the ball. This force is easily applied by the clamping lever (Identification no. 1).
The ball joint can be mounted from below with the d5 internal thread or together with the GN 784.1 flange, available as an accessory, using three through-holes from above.
For a permanent high stop torque, the contact surfaces of the balls must be kept free of grease. Exceeding the recommended tightening torque increases the securing of the ball joint in its end position, but may result in increased wear and potential failure of the clamping mechanism.
see also...
• Flanges GN 784.1
How to Order
How to order (with female thread) | 1 | d1 |
| 2 | d3 (d2) | |
| 3 | Type | |
| 4 | Identification no. | |
| 5 | Finish |
How to order (with male thread) | 1 | d1 |
| 2 | d4 | |
| 3 | Type | |
| 4 | Identification no. | |
| 5 | Finish |
Specification 
Aluminum
anodized black ELS
• Base plate, ball
Aluminum, blank
• Adjustable hand lever (Identification no. 1)
- Zinc die casting
plastic coated
silver, RAL 9006, textured finish
- Threaded stud and retaining screw
Stainless Steel AISI 303
• Set screw (Identification no. 2)
Stainless Steel AISI 304
• Stainless Steel characteristics
• RoHS compliant
On request
Dimensions
 |  | | | ||||||
| d1 | d2* | r1 | d3** | r2 | d4 | r1 | l1 | ||
| Type A | Type A | Type B | |||||||
| Inch thread | Inch thread | ||||||||
| 23 | M 4 | 17.3 | M 5 | - | 24.8 | M 5 | - | 17.3 | 8 |
| 23 | - | - | - | 1/4 (≙ 1/4-20) | 24.8 | M 6 | 1/4 (≙ 1/4-20) | 17.3 | 10 |
| 31 | M 5 | 21.5 | M 6 | 1/4 (≙ 1/4-20) | 32.5 | M 6 | 1/4 (≙ 1/4-20) | 21.5 | 10 |
| 31 | - | - | - | - | 32.5 | M 8 | - | 21.5 | 12 |
| 39 | M 5 | 25.5 | M 6 | - | 36.2 | M 6 | - | 25.5 | 10 |
| 39 | - | - | M 8 | 3/8 (≙ 3/8-16) | 40.5 | M 8 | 3/8 (≙ 3/8-16) | 25.5 | 12 |
| 49 | M 8 | 30.8 | - | 3/8 (≙ 3/8-16) | 44.8 | M 8 | 3/8 (≙ 3/8-16) | 30.8 | 12 |
| 49 | - | - | M 10 | - | 51.8 | M 10 | - | 30.8 | 15 |
| d1 | d5*** | d6 | d7 | d8 | h1 | h2 | h3 | k | l2 | m | A/F1 | A/F2 | recommended tightening torque of the clamping (Identification no.) in Nm ≈ | resulting stop torque on the ball in Nm ≈ |
| 23 | M 5 | 14 | 11 | 2.5 | 26.6 | 21.7 | 10.6 | 32 | 22 | 7 | 9 | 2.5 | 1.5 | 4.5 |
| 31 | M 6 | 18 | 14 | 3.5 | 35.5 | 29.6 | 14.9 | 36 | 22 | 9 | 12 | 3 | 2.5 | 6.5 |
| 39 | M 8 | 24 | 15 | 4.5 | 45 | 37.2 | 18.9 | 44 | 30 | 12 | 13 | 4 | 4 | 16 |
| 49 | M 8 | 28 | 19.5 | 4.5 | 56 | 46.1 | 24 | 49 | 30 | 16 | 17 | 4 | 4 | 20 |
| Référence pièce | Relatif à |
Prix unitaire standard
| Quantité minimale de commande | Remise sur volume | Diameter d1 | Thread d2 (Type A) | Identification No. | Finish | Type | Diamètre d1 | Filetage d2 (type A) | N° d'identification | Finition | Type | Filetage d3 | Filetage d4 | Filetage d3 (type A) | Filetage d4 (type B) | d5 | d6 | d7 | d8 | r1 | r2 | h1 | h2 | h3 | k | l1 | l2 | m | sw1 | x16 | x17 | r1 | Poids (kg) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
52.60 € 27.88 € | 1 | Disponible |
Jour même
Stock | - | - | - | - | - | 23 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | A, bille avec filetage femelle | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 5 | 14 | 11 | 2.5 | 17.3 | 24.8 | 26.6 | 21.7 | 10.6 | 32 | - | 22 | 7 | 9 | 1.5 | 4.5 | - | - | ||
52.90 € | 1 | Disponible | 7 jours | - | - | - | - | - | 23 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | B, bille avec filetage mâle | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 5 | 14 | 11 | 2.5 | 17.3 | - | 26.6 | 21.7 | 10.6 | 32 | 10 | 22 | 7 | 9 | 1.5 | 4.5 | - | 0.250 | ||
| - | 51.46 € | 1 | Disponible | 7 jours | - | - | - | - | - | 23 | M 4 | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | A, bille avec filetage femelle | - | - | - | - | M 5 | 14 | 11 | 2.5 | 17.3 | 24.8 | 26.6 | 21.7 | 10.6 | 32 | - | 22 | 7 | 9 | 1.5 | 4.5 | 17.3 | 0.040 | |
| - | 47.86 € | 1 | Disponible | 7 jours | 23 | M 4 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 49.26 € 26.11 € | 1 | Disponible |
Jour même
Stock | 23 | M 5 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 51.46 € | 1 | Disponible | 7 jours | - | - | - | - | - | 23 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | B, bille avec filetage mâle | - | - | - | M 5 | M 5 | 14 | 11 | 2.5 | 17.3 | - | 26.6 | 21.7 | 10.6 | 32 | 8 | 22 | 7 | 9 | 1.5 | 4.5 | 17.3 | 0.150 | |
| - | 59.48 € 31.52 € | 1 | Disponible |
Jour même
Stock | - | - | - | - | - | 31 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | A, bille avec filetage femelle | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 6 | 18 | 14 | 3.5 | 21.5 | 32.5 | 35.5 | 29.6 | 14.9 | 36 | - | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | - | |
| - | 58.90 € 31.22 € | 1 | Disponible |
Jour même
Stock | - | - | - | - | - | 31 | M 5 | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | A, bille avec filetage femelle | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | - | M 6 | 18 | 14 | 3.5 | 21.5 | 32.5 | 35.5 | 29.6 | 14.9 | 36 | - | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | 0.160 | |
| - | 55.20 € 29.26 € | 1 | Disponible |
Jour même
Stock | 31 | M 5 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 59.78 € 31.68 € | 1 | Disponible |
Jour même
Stock | - | - | - | - | - | 31 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | A, bille avec filetage femelle | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | M 6 | - | M 6 | 18 | 14 | 3.5 | 21.5 | 32.5 | 35.5 | 29.6 | 14.9 | 36 | - | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | 0.100 | |
| - | 55.70 € | 1 | Disponible | 7 jours | 31 | M 6 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
59.18 € 31.37 € | 1 | Disponible |
Jour même
Stock | - | - | - | - | - | 31 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | B, bille avec filetage mâle | 1/4 (= 1/4-20) | 1/4 (= 1/4-20) | - | M 6 | M 6 | 18 | 14 | 3.5 | 21.5 | - | 35.5 | 29.6 | 14.9 | 36 | 10 | 22 | 9 | 12 | 2.5 | 6.5 | 21.5 | 0.100 | ||
| - | 55.20 € 29.26 € | 1 | Disponible |
Jour même
Stock | 31 | M 6 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
59.18 € | 1 | Disponible | 4 jours | - | - | - | - | - | 31 | - | 1, Serrage avec levier manuel réglable | ELS, anodisé noir | B, bille avec filetage mâle | - | - | - | M 8 | M 6 | 18 | 14 | 3.5 | 21.5 | - | 35.5 | 29.6 | 14.9 | 36 | 12 | 22 | 9 | 12 | 2.5 | 6.5 | - | - | ||
| - | 55.20 € | 1 | Disponible |
Jour même
Stock | 31 | M 8 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 69.20 € 36.68 € | 1 | Disponible |
Jour même
Stock | 39 | - | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 63.36 € 33.58 € | 1 | Disponible |
Jour même
Stock | 39 | - | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 67.36 € | 1 | Disponible |
Jour même
Stock | 39 | M 5 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 62.50 € | 1 | Disponible | 7 jours | 39 | M 6 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 67.70 € | 1 | Disponible | 7 jours | 39 | M 6 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 68.70 € | 1 | Disponible |
Jour même
Stock | 39 | M 8 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 84.20 € 44.63 € | 1 | Disponible |
Jour même
Stock | 49 | - | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 85.90 € 45.53 € | 1 | Disponible |
Jour même
Stock | 49 | - | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 79.96 € 42.38 € | 1 | Disponible |
Jour même
Stock | 49 | - | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 84.90 € | 1 | Disponible | 7 jours | 49 | M 8 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 78.92 € 41.83 € | 1 | Disponible |
Jour même
Stock | 49 | M 8 | 2-Clamping with set screw | ELS-anodized black | A-Ball with female thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 79.70 € 42.24 € | 1 | Disponible |
Jour même
Stock | 49 | M 8 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 86.18 € | 1 | Disponible | 7 jours | 49 | M 10 | 1-Clamping with adjustable hand lever (only for d1=39 and 49) | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| - | 80.48 € 42.65 € | 1 | Disponible |
Jour même
Stock | 49 | M 10 | 2-Clamping with set screw | ELS-anodized black | B-Ball with male thread | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configurer
Stock
-
- Afficher les articles en stock uniquement
Propriétés de base
-
Diameter d1
- 23
- 31
- 39
- 49
-
Thread d2 (Type A)
- M 4
- M 5
- M 6
- M 8
- M 10
-
Identification No.
- 1-Clamping with adjustable hand lever (only for d1=39 and 49)
- 2-Clamping with set screw
-
Finish
- ELS-anodized black
-
Type
- A-Ball with female thread
- B-Ball with male thread
-
Diamètre d1
- 23
- 31
-
Filetage d2 (type A)
- M 4
- M 5
-
N° d'identification
- 1, Serrage avec levier manuel réglable
-
Finition
- ELS, anodisé noir
-
Type
- A, bille avec filetage femelle
- B, bille avec filetage mâle
-
Filetage d3
- 1/4 (= 1/4-20)
-
Filetage d4
- 1/4 (= 1/4-20)
-
Filetage d3 (type A)
- M 6
-
Filetage d4 (type B)
- M 5
- M 6
- M 8
-
d5
- M 5
- M 6
-
d6
- 14
- 18
-
d7
- 11
- 14
-
d8
- 2.5
- 3.5
-
r1
- 17.3
- 21.5
-
r2
- 24.8
- 32.5
-
h1
- 26.6
- 35.5
-
h2
- 21.7
- 29.6
-
h3
- 10.6
- 14.9
-
k
- 32
- 36
-
l1
- 8
- 10
- 12
-
l2
-
m
- 7
- 9
-
sw1
- 9
- 12
-
x16
- 1.5
- 2.5
-
x17
- 4.5
- 6.5
-
r1
- 17.3
- 21.5
-
Type
- 784
-
Filtrer par type de données CAO
- 2D
- 3D
Filtrer par jours d'expédition standard
-
- Tous les articles
- Jour même
- 4 jours ou moins
- 7 jours ou moins
Propriétés optionnelles
- Les spécifications et les dimensions de certaines pièces peuvent ne pas être intégralement indiquées. Pour plus de détails, reportez-vous aux catalogues des fabricants .
Assistance technique
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.