Connecteurs entre circuits imprimés（Tension admissible：CA125）

?* À propos du délai d'expédition et des prix

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH3

  OMRON

  [Features]
  ・ A space saving type that saves space in the screw mounting section.
  ・ Handles stacking heights of 12 mm to 20 mm.
  ・ A half pitch connector that handles heights between circuit boards of 12 mm to 20 mm at a pitch of 1 mm with stacking connections.
  ・ High-density mounting is possible thanks to the 2-row configuration with a contact pitch of 1.27 mm.
  ・ Connections with the circuit board use four row staggered configurations (1.27 mm × 1.905 mm), and stop pins are used as standard for all contains to help prevent floating and falling during soldering.
  ・ Uses a leaf connection structure that is able to hold up to prying and that enables smooth insertion and extraction.
  ・ Has a mating length of 3.1 mm, helping improve space during mounting.
  ・ The design of the press fit section helps maintain a stable contact force.
  ・ What's more, by utilizing gold and palladium-plated contact points, the reliability of the contacts has been improved even further.
  ▪ UL standard certified product (File No.E103202).
  ・Cannot be mated with XH2/XH4 half pitch connectors.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.98 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Série DIC

  HONDA TSUSHIN KOGYO

  2.54 mm pitch connector used for circuit switching and the like.
  
  [Features]
  • Many varieties available for combination with the FCC and HKP series.
  • Plating thickness is selectable according to cost requirements.
  • Insulator is UL-certified.
  • These connectors also come in 2, 3 and 4-series versions.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur entre circuits imprimés avec pas de 1.27mm, hauteur 5 à 11mm, série FX4

  HIROSE ELECTRONIC

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.07 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur de carte CF séries MI20 / 21

  HIROSE ELECTRONIC

  This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.73 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteurs arrière série NX pour cartes d'E / S

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.01 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur pour carte microSD - série DM3

  HIROSE ELECTRONIC

  A socket connector for use with the microSD Card TM. Available in a wide array of variations.
  Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.60 €
  Délai d'expédition minimum ：	11 jours

  *Prix unitaire/configuration de base

• 

  Connecteur PC Card série IC1, compatible avec la norme PC Card

  HIROSE ELECTRONIC

  This PC card connector is compliant with the PC Card Standard.
  
  [Features]
  · Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
  · Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
  · Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
  · Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
  · Card connectors that support automatic mounting are available.
  · Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.33 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Prise compatible CardBus conforme aux normes PC Card, série IC9

  HIROSE ELECTRONIC

  This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
  
  [Features]
  ・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
  ・This allows for every type of card signal to be accelerated.
  ・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
  ・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions d'empilement profil bas) - XH4A

  OMRON

  [Features]
  ・A half-pitch connector with same shaped pins (male) and sockets (female) for stacking connections. Handles heights between circuit boards of 5 mm to 11 mm.
  ・ A half-pitch connector for low profile stacking connections. Handles heights between circuit boards of 5 mm to 11 mm at a pitch of 1 mm (surface mounting types handle heights of 5 mm to 9 mm at a pitch of 1 mm).
  ・ A selection of DIP and surface mounting type (SMT) are available.
  ・ A connector with same shaped pins (male) and sockets (female).
  ・ Standardized stop pins for all contacts to prevent floating and falling during soldering.
  ・ A leaf contact structure that can cope with prying.
  ▪ A UL standard certified product (File No.E103202) (except for SMT type).
  ・Cannot be mated with XH2/XH3 half pitch connector.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.39 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur demi-pas (pour connexions entre circuits imprimés) - XH2

  OMRON

  A 1.27-mm pitch connector for high-density mounting and compacted electronic devices
  
  [Features]
  · Available in the same shape as the G5D in both AC/DC or DC-only types.
  · Open-state leakage current between outputs is 10 μA or less.
  · The voltage resistance between input/output is 2500 VAC.
  · Input resistance and non-input resistance types available.
  · Overvoltage absorption circuit built in.
  ▪ Can switch between AC full-wave rectification and half-wave rectification.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.58 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...