Connecteurs en nylon（Norme représentative：TUV）

?* À propos du délai d'expédition et des prix

• • En promotion
  • Recommandation

  

  Série D3000

  TE CONNECTIVITY

  
  The D-3000 series, compatible with a wide range of dynamic main series sizes.
  
  [Features]
  · Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
  · Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
  · Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
  · High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
  · Newly developed copper alloy material realized with a reliable 3-point contact construction.
  · Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
  · Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.38 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Série D1000

  TE CONNECTIVITY

  The D-1000 Series are the smallest connectors within the Dynamic Series range.
  
  [Features]
  [Supports a wide range of wires]
  · This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
  [Crimp tool with interchangeable dies]
  · The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
  [A full Series lineup]
  · The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
  · The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
  · The Series lineup includes different color versions in addition to the previous standard black color.
  · In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
  · The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
  · Contact options support an extensive range of uses based on application, quality, and cost considerations.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.44 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur Micro-Fit 3.0™ (43025)

  MOLEX

  [Features]
  A Molex 3.00 mm pitch connector. Available in a variety of fitting forms and poles, including wire-to-wire, wire-to-circuit board, and board-to-board types. Maximum rated current is 5.0 A, and we also have products compatible with other brands. (Coupling housings: 43020/43045/44242)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur étanche Mizu-P25™ miniature (52213)

  MOLEX

  A compact IP67 (international protection class) Molex wire-to-wire connector with a dust and water proof structure. (Compatible Terminal: 50148, Fitting Plug: 52266)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur XH【1-50 pièces par conditionnement】

  JST

  Based on the high reliability and versatility of the NH series, this connector has been designed to be smaller, with a mounting height of 9.8 mm.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.55 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur EH【50-100 pièces par conditionnement】

  JST

  This connector has an ultra-thin design, in response to customers' needs for high-density mounting and increased freedom in circuit design of electronic equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.25 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur PH【1-1,000 pièces par conditionnement】

  JST

  This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur YL【1-500 pièces par conditionnement】

  JST

  [Features]
  · Can use a safety design retainer to prevent incomplete insertion of contacts. This guides the contact to the correct fixed position and securely locks it in place.
  · Housing lance method.
  ·Retainer.
  ▪ Interlocking structure.
  · Panel locking structure.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.16 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Nouveau boîtier Mini-Fit au pas de 4.2mm 5557

  MOLEX

  Molex connector for wire-to-wire and board-to-board connections.
  [Features]
  · Single-row and dual-row products available (compatible terminal: 5556G, mating header: 5566, 5569).
  · For wire-to-wire connections, use compatible housing: 5559.
  · Fully-insulated terminal, positive lock housing, low contact pressure, polarized housing.
  · The Mini-Fit product family provides blind-mating, TPA and high-current options.
  · Connector for maximum rated current power of 9.0 A.
  [Applications]
  · Consumer devices, etc.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.53 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur étanche Mizu-P25™ miniature (52266)

  MOLEX

  [Features]
  A compact IP67 (international protection class) Molex wire-to-wire connector with a dust and water proof structure. (Compatible terminal: 50147, Mating plug: 52213)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.35 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Série D2000

  TE CONNECTIVITY

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.57 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur NH【50 pièces par conditionnement】

  JST

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.21 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteurs SM【1-1,000 pièces par conditionnement】

  JST

  This small-type relay connector is equipped with a panel lock mechanism, and offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  
  [Features]
  ・This small-type relay connector with 2.5-mm pitch offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  ・High contact pressure, dual contact.
  · Shell type housing.
  ・Applicable to a wide range of panels.
  ▪ Arm lock mechanism.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.11 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîtier modulaire SL™ (70066)

  MOLEX

  Molex 2.54-mm pitch wire-to-wire and wire-to-board connector, available in a range of options suitable for discrete wires, IDT and FFC cables. 1

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.23 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier standard 0.093" (1625-NR)

  MOLEX

  [Features]
  A Molex 3.68 mm pitch connector for standard wire-to-wire connections. Single-row, double-row, and panel mount types are available. (Mating housing: 1625-NP, Compatible terminal: 1561/1855)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Série D4000

  TE CONNECTIVITY

  The D4000 series is optimal for 20A commercial power supply line use.
  
  [Features]
  • Small high current contact point: By increasing the number of contact areas, this newly designed contact point ensures Hertzian stress is divided among 4 contact positions.
  • This not only provides current capacity (rated for 20A maximum), but also increases reliability tremendously.
  • Sequential contact: When circuits are electrified through static electricity or other currents, this product can be used to perform mating via a sequential process, initially by grounding the mating site.
  • Long tab was developed for sequential connection use with tab contacts.
  • By using this long tab in combination with a normal tab contact, a sequential connection environment architecture can be created.
  • High current tine (lead): This type of tine (lead) mounts to a circuit board, and is a newly developed folding V-shaped tine.
  • Although the joining area with the circuit board is wide, the through hole is extremely small, and this allows for easy pattern routing (patent pending).
  • Lock feeling: The clear locking sound and vibration that are apparent to the operator during mating ensure that work can be completed even in environments where visual inspection is not possible, without producing any malfunctions such as incomplete mating (partial mating).
  • Keying: The housing has a keying (slit) installed, and by using X keys and Y keys for different purposes, improper mating can be prevented.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.03 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Série D5000

  TE CONNECTIVITY

  A D-5000 Series connector for use with equipment main power supply lines.
  
  [Features]
  · High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
  · By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
  · The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
  · The contacts can be selected to match the application.
  · Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
  · The long tab was developed for sequential coupling of tab contacts.
  · By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
  · High current tines (lead): This type of tine (lead) mounts to a circuit board.
  · A newly developed twin lead type.
  · This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
  · IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
  · By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.14 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Module HTS dynamique

  TE CONNECTIVITY

  [Features]
  · The Dynamic Series of connectors have been developed heavy duty waterproofing applications.
  · All Dynamic Series connectors are mountable from the inside of control panels to the panel exterior.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.04 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Mini-connecteur Mate-N-Lok universel【1-20 pièces par conditionnement】

  TE CONNECTIVITY

  Small connector that facilitates high density wiring inside equipment.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.56 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Série ML-7000

  SATO PARTS

  A button-lock relay type, screwless terminal block convenient for relay wiring inside narrow ducts, etc. This a single-action coupling type and comes in 8 different colors.
  
  [Features]
  · Compatible with both bundled and single cords.
  · Connections can be made using the irregular surface of the main body.
  · 8 standard button colors are available for easy line discernment.
  · A single main unit is compatible with a wide range of wire materials and uses.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.16 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteurs EL【10-100 pièces par conditionnement】

  JST

  A small connector designed for smoother mating, even when prying open the contact housing.
  
  [Features]
  · A small connector with easy contact housing insertion.
  · Ideal for pry insertion when mating.
  · Arm lock mechanism with exceptional durability.
  · Contact for 2 wire crimping.
  · Compatible with an ML connector.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.61 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur HL (pour connexions de relais)【1-6,000 pièces par conditionnement】

  JST

  Utilizing free spring contact structure, this connector is designed with a retainer, inner lock, and other safety features.
  
  [Features]
  · A connector with 3.96-mm pitch that utilizes free spring contact structure.
  · Besides the excellent reliability offered by the unique stress-relaxation ability, a retainer, inner lock, and other safety features are also designed into the product.
  · Utilizing a free spring contact structure.
  · Housing lance method.
  ▪ Interlock structure.
  · A retainer.
  · Panel lock structure.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur VH【50 pièces par conditionnement】

  JST

  This is a highly reliable small high-capacity connector for printed circuit boards, which enables a wide range of connections from signal circuits in consumer electronics, to power supply circuits and output circuits.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.73 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur XA (pour PCB)【1-250 pièces par conditionnement】

  JST

  This connector has a strong locking mechanism to prevent the housing from coming off, and to prevent mis-insertion when mating.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.86 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur XA (pour connexions de relais)【1-10 pièces par conditionnement】

  JST

  A connector with 2.5-mm pitch and strong lock for combined use with relays and circuit boards.
  
  [Features]
  ・A 2.5-mm pitch relay connector compatible with preexisting XA sockets.
  ・In addition to being compatible with an extremely reliable retainer, this product can also be attached to panels.
  ・ Corresponds to preexisting XA sockets.
  ・Inner type contact lance.
  ・Compatible with Panel Mount.
  · A retainer.
  ・Strong Lock Mechanism.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.26 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur fil à fil au pas de 2.50 mm (51103)

  MOLEX

  Also suitable for Molex wire-to-board connectors. (Mating housings: 51198 / 53375 / 53426 / 53517 / 53608, conforming terminals: 50351 / 50752)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.05 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Boîtier de fiche mâle fil à fil au pas de 2.5mm (51198)

  MOLEX

  [Features]
  • Housing 51103 for Molex fittings; can fit Mini-Locks.
  · Number of leads: 2 to 15 leads.
  • Housing lance.
  • Includes flanges for panel mounting.
  • Panel thickness: 0.8 - 2.0 mm compatible.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.19 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galette fil à circuit imprimé, droits, pas de 3.50mm (53258)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Straight type (fits housing 51067).
  · Number of leads: 2 to 15 leads.
  • Phosphor bronze: 53258-30.
  • Brass: 53258-29.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.56 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Boîtier de connecteurs fil à circuit imprimé au pas de 3.50mm (51067)

  MOLEX

  [Features]
  · Molex wire-to-board connector.
  • Housing (compatible wafers: 53258, 53259, and 53265).
  · Number of leads: 2 to 15 leads

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.09 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteur Micro-Fit 3.0™ (43020)

  MOLEX

  A Molex 3.00 mm pitch connector. Available in a variety of fitting forms and poles, including wire-to-wire, wire-to-circuit board, and board-to-board types. Maximum rated current is 5.0 A, and we also have products compatible with other brands. A housing. (Mating housing: 43025)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur micro-Fit 3.0 (43045)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins.
  · Maximum rated current: 5.0 A. Brand name compatible products are also available. A header for boards (compatible housing: 43025).
  [Specifications changed in June 2015. Gloss plating ⇒ non-gloss plating. This eliminates the terminal gloss. There are no changes in the specifications.]

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.90 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur micro-Fit 3.0 (43640)

  MOLEX

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins. Maximum rated current: 5.0 A. Brand name compatible products are also available. (Compatible housing: 43645)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Embase Mini-Fit Jr.™ en angle (5569)

  MOLEX

  Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. A power connector for a maximum rated current of 13.0 A. Angled type. (Mating housing: 5557)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2.72 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur électrique Mini-Fit Sr. (42816)

  MOLEX

  A Molex 10.00 mm pitch wire-to-board, wire-to-wire connector. Maximum current: 50.0 A (2-circuit, applicable wire size: 8 AWG). (Compatible terminal: 42815, compatible housing: 42818)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.29 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur électrique Mini-Fit Sr.™ (42818)

  MOLEX

  Molex 10.00-mm pitch connector for wire-to-wire and wire-to-circuit board connections. Maximum current with 2 pole devices and appropriate wire size is 50.0 A for 8AWG. (Conforming terminal: 42817 mate housing: 42816).

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1.31 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galette fil à circuit imprimé Mini-Lock™ au pas de 2.50mm (53426)

  MOLEX

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. Angle type (Mating housings: 51102 / 51103 / 51163)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.16 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier modulaire SL™ (70107)

  MOLEX

  A Molex 2.54 mm pitch connector for circuit board-to-wire connections. Available for discreet wires and all types of IDT/FFC cables. ②

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.51 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galette SPOX™ (5273)

  MOLEX

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5195)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Galette SPOX™ (5281)

  MOLEX

  [Features]
  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 5197)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier SPOX™ (5195)

  MOLEX

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housings: 5272/ 5273/ 5274/ 5096/ 53405/ 5271, compatible terminals: 5194/ 5225)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier SPOX™ (5197)

  MOLEX

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating wafers: 5279/ 5280/ 5281/ 5282, compatible terminals: 5194/ 5225)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier SPOX™ (5240)

  MOLEX

  The Molex Spox family of wire-to-circuit board connectors have a structure that works within a pitch range of 2.50 mm to 5.08 mm. (Mating housing: 51191, conforming terminal: 5241)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.56 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier de fiche mâle standard 0.093" (3191NP)

  MOLEX

  Molex power connectors, available in 5.03 mm, 6.30 mm and 6.70 mm pitch types. (Fitting Housing: 3191-NR1, Compatible Terminal: 1190)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.31 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Embase standard 0.093" (5219)

  MOLEX

  Molex power connector, available in 5.03 mm, 6.30 mm and 6.70 mm pitch types. (Coupling Housing: 3191-NR1)
  
  [Features]
  · Number of leads: 2 to 6 leads

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.95 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boîtier de prise standard 0.093" (3191NR1)

  MOLEX

  [Features]
  Molex power connectors, available in 5.03 mm, 6.30 mm and 6.70 mm pitch types. (Mating housing: 3191NP, Compatible terminal: 1189)

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	0.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...