Couronnes de perçage（Coating Type：Autre）

?* À propos du délai d'expédition et des prix

• • Recommandation

  

  Foret Aqua EX type plat AQDEXZ

  NACHI(FUJIKOSHI)

  180° flat multifunctional carbide drill.
  [Features]
  · Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
  · Capable of producing an accurate counter-bore surface with one shot.
  · Aqua EX coating improves heat and wear resistance, providing long life.
  [Applications]
  · Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	88.05 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Très faible diamètre, en carbure type extra-court pour usinage de précision WX-MS-GDS

  OSG

  Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	31.40 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, 3 cannelures, type à long cou FHL-GDTS

  OSG

  Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	67.60 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret à canon 25 X D EB100 5646

  GUHRING

  A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	268.71 €
  Délai d'expédition minimum ：	24 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type extra-court AQDS

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
  · Drill for dry machining.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	53.04 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Nexus type extra-court NEXUS-GDS

  OSG

  Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	15.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret à tige de fraise 5 X D avec trou d'huile RT100U 5511

  GUHRING

  [Features]
  · Internal lubrication enables high performance drilling without steps.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	116.22 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Micro-foret, 15 X D, type N 6412

  GUHRING

  Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machining

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	190.15 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret PXDZ à tête Phoenix interchangeable, tête PXD, type 3D

  OSG

  [Specifications]
  · Shape: Holder
  · Coating: WDI

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	232.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 5D AQDEXOH5D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Product lineup is for 3D, 5D and 8D boring depths.
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  · Capable of stable wet processing and MQL processing.
  · For highly-efficient hole drilling up to 5 times the drill diameter.
  [Applications]
  · Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	120.91 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  HSS type extra-long type 20D TDXL20D

  OSG

  HSS Drill for Machining Extra-Deep Holes Up to 20 D

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret à canon 50 X D EB100 5647

  GUHRING

  A gun drill integrally made from solid carbide from head to shank. Shrink fit tool holders can also be used.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	334.25 €
  Délai d'expédition minimum ：	24 jours

  *Prix unitaire/configuration de base

• 

  Jeu de forets à tige droite, 3 x D RT100U 2473

  GUHRING

  [Features]
  · With Guhring's unique R-Blade, it is excellent in dividing and discharging cutting chips and enables high efficiency and high speed machining.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	102.26 €
  Délai d'expédition minimum ：	24 jours

  *Prix unitaire/configuration de base

• 

  Foret à tige droite, série 3 GT100 504

  GUHRING

  The go-to part for drilling deep holes. A long drill for high-efficiency machining (Feature 3).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	62.09 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Foret à tige conique, type standard N 245

  GUHRING

  Versatile drill for general applications.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	46.33 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type plat à longue tige AQDEXZLS

  NACHI(FUJIKOSHI)

  180° flat multifunctional carbide drill.
  [Features]
  · Flat drill 10D type with excellent drilling performance.
  · Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
  · Capable of producing an accurate counter-bore surface with one shot.
  · Aqua EX coating improves heat and wear resistance, providing long life.
  [Applications]
  · A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	132.76 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret plat en carbure ADFLS-2D

  OSG

  [Features]
  · Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
  · The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
  · The original bottom edge shape reduces the cutting resistance and achieves stable processing.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	89.70 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-ESS AGESS

  NACHI(FUJIKOSHI)

  Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
  [Features]
  · New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
  · 50C type capable of high-speed machining at a cutting speed of 60 m/min.
  · The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
  [Applications]
  · Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.91 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua, 3 cannelures AQD3F

  NACHI(FUJIKOSHI)

  3-flute carbide drill capable of high-precision drilling and reamer-less processing.
  [Features]
  · High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
  · Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
  · Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
  [Applications]
  · High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	116.31 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type standard AQDR

  NACHI(FUJIKOSHI)

  A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
  [Features]
  · Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
  · Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
  · Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
  · High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
  [Applications]
  · Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	87.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua avec lame inférieure, 3 cannelures AQDED3F

  NACHI(FUJIKOSHI)

  Coated carbide drill which achieves high efficiency machining of holes in cast materials and screw pilot holes.
  [Features]
  · Cast iron and aluminum cast parts have a high performance machined hole with H7 precision.
  · 3-flute cutting edge with excellent cutting balance minimizes cutting vibration during machining.
  · Finish processing is possible with work efficiency of 10 times or more compared to a reamer.
  [Applications]
  · 3-flute cutting edge with excellent cutting balance ideal for high-quality machining.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	145.83 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-ES AGES

  NACHI(FUJIKOSHI)

  Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
  [Features]
  · New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
  · 50C type capable of high-speed machining at a cutting speed of 60 m/min.
  · Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
  · The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
  [Applications]
  · Also convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.26 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type standard AQDEXR

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating.
  · Longer life by improving lubricity and heat/abrasion resistance.
  · The unique thinning shape increases biting and reduces cutting resistance.
  [Applications]
  · Ideal for thin work materials and small low-rigidity processing machines.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	113.17 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua FC AQDFC

  NACHI(FUJIKOSHI)

  A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
  [Features]
  · Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
  · Longer life than conventional FC drills.
  · The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
  · A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
  [Applications]
  · Ideal for long life machining of FC, FCD, and low carbon steel.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	111.96 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua type dur AQDH

  NACHI(FUJIKOSHI)

  Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
  [Features]
  · It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
  · Wear resistance and chipping resistance are greatly improved.
  · Uses a thick core and weak torsion.
  · The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
  [Applications]
  · High performance machining of 50 to 70 HRC high hardness steel is possible.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	35.79 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Micro-foret Aqua AQMD

  NACHI(FUJIKOSHI)

  A drill that is difficult to break and stable for machining.
  [Features]
  · Employs cemented carbide ideal for small diameter hole drilling.
  · A drill with high rigidity is used.
  · The cutting load has been reduced by circumferential clearance and thinning.
  [Applications]
  · Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	39.65 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Foret AG Power type long AGPLSD

  NACHI(FUJIKOSHI)

  A drill that can steplessly drill deep holes up to L/D20.
  [Features]
  · Adopts AG coating with excellent wear resistance to realize a longer life.
  · Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
  [Applications]
  · Ideal for deep hole machining for anything from raw materials to mold steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	25.88 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX type extra-court AQDEXS

  NACHI(FUJIKOSHI)

  Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
  [Features]
  · Shape of the new cutting edge greatly improves chip discharge performance.
  · The cutting resistance is reduced to provide stable machining even on small machines.
  · A special lubrication function film is provided on the surface layer of the AlCrSi coating to improve the lubricity, heat resistance and abrasion resistance, thereby prolonging the service life.
  [Applications]
  · The unique thinning shape increases biting and reduces cutting resistance.
  · Stable cutting performance even with thin work materials and small low-rigidity processing machines.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	95.75 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret AG-SUS type standard AGSUSR

  NACHI(FUJIKOSHI)

  Drill capable of stable hole drilling with AG coating excellent in heat resistance.
  [Features]
  · Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
  · It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
  · Stable machining accuracy is achieved by using a high-precision end mill shank.
  [Applications]
  · Optimal for stainless steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.71 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 3D AQDEXOH3D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  [Applications]
  · Stable processing of mild steel to high hardness materials.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	138.38 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Aqua EX avec trou d'huile 8D AQDEXOH8D

  NACHI(FUJIKOSHI)

  Aqua Drill EX series solid carbide drills with internal coolant.
  [Features]
  · Product lineup is for 3D, 5D and 8D boring depths.
  · Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
  · Aqua EX coating achieves stable long life.
  [Applications]
  · Stable processing of mild steel to high hardness materials.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	174.14 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Forer micro-rotatif extra-dur pour usinage de l'acier inoxydable MRS-GDL

  OSG

  Ideal for small diameter stainless steel processing

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.20 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  En carbure type extra-long avec trou de graissage pour moules métalliques haute dureté FTO-H-GDXL

  OSG

  Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	227.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, type extra-court FH-GDS

  OSG

  Developed for machining small diameter holes in hardened steel, it is suitable for high-precision and long-life machining of shallow holes (up to 3D or so)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	52.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  En carbure pour acier haute dureté, type moyen FH-GDN

  OSG

  Developed for machining small diameter holes in hardened steel, it is capable of machining deep holes (up to 7D or so)

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	57.45 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure de très faible diamètre, type 10D UVM-DRL-10D

  OSG

  Enables unprecedented ultra-small diameter drilling range with a minimum diameter of φ0.02.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	106.94 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret en carbure de très faible diamètre, type 5D UVM-DRL-5D

  OSG

  Enables unprecedented ultra-small diameter drilling range with a minimum diameter of φ0.02.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	91.21 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret de tête en carbure de très faible diamètre UVM-LDS

  OSG

  The collaboration with UVM-DRL enables high-precision drilling

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	153.29 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Nexus type standard NEXUS-GDR

  OSG

  Drill with WDI coating suitable for stainless steel, mild steel, aluminum alloy, copper alloy and the like that suppresses peripheral margin wear and achieves long service life at high speeds

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  HSS type extra-long type 15D TDXL15D

  OSG

  HSS Drill for Machining Extra-Deep Holes Up to 15 D

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.90 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Poudre HSS pour traitement haute vitesse, type standard VP-GDR

  OSG

  Super Premium High + V coating enables high-speed machining similar to the carbide drill

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.08 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Pour tours V-MT-GDN

  OSG

  V-coated tapered shank and medium type drill with special attention given to reducing thrust and improving usability with lathes

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	66.00 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Poudre HSS pour acier revenu, type extra-court VPH-GDS

  OSG

  Exerts excellent cost performance for tempered steel processing of 40 to 50 HRC

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.37 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Type droit, pour usage général V-SDR

  OSG

  A general-purpose drill for any machine that can be used from low speeds to the medium speed range

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.30 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Foret Unimax avec micro-couche UTDLX UT, lame longue

  UNION TOOL

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	35.95 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...