Forets en carbure（work material：Fonte）
Rechercher en précisant la catégorie inférieure
Forets à tige droite / à tige de fraise (carbure)
Forets à tige coniques (carbure)
Forets étagés (carbure)
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- Recommandation
Foret Aqua EX type plat AQDEXZ
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Configurer maintenantà partir de∗ ： 88.05 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Foret en carbure en V torsadé, type long pour modèles H7-H8
OMIKOGYO
For more precise, more efficient operation. Twisted V drill to support next generation high speed machining. A drill with oil hole that makes full use of state-of-the-art technology.- Remise sur volume
Configurer maintenantà partir de∗ ： 333.54 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
- En promotion
Très faible diamètre, en carbure type extra-court pour usinage de précision WX-MS-GDS
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components- Remise sur volume
Configurer maintenantà partir de∗ ： 31.40 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Configurer maintenant
à partir de∗ ： 30.72 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret en carbure type moyen pour usinage de métaux non ferreux NF-GDN
OSG
Enables cost-effective and high-speed drilling of aluminum castings, aluminum die cast, and aluminum extruded materials that are widely used in automobiles and aircraft- Remise sur volume
Configurer maintenantà partir de∗ ： 18.82 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret Aqua type extra-court AQDS
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.Configurer maintenantà partir de∗ ： 53.04 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Configurer maintenant
à partir de∗ ： 27.26 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret à tige de fraise 5 X D avec trou d'huile RT100U 5511
GUHRING
[Features]
· Internal lubrication enables high performance drilling without steps.- Remise sur volume
Configurer maintenantà partir de∗ ： 116.22 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Micro-foret, 15 X D, type N 6412
GUHRING
Improves chip disposal by increasing groove width, allowing stable small diameter deep hole milling. Equipped with cooling ducts for internal lubrication, ideal for deep hole machiningConfigurer maintenantà partir de∗ ： 190.15 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Stub
MISUMI
Standard drills that are effective for iron-based materials are assorted in 0.1 mm increments at impressive low prices- Remise sur volume
Configurer maintenantà partir de∗ ： 47.71 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Stub
MISUMI
A carbide drill with high versatility is available at an astonishing low price- Remise sur volume
Configurer maintenantà partir de∗ ： 25.57 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Straight Shank / Stub Model
MISUMI
Standard high-quality carbide drill is available at affordable price- Remise sur volume
Configurer maintenantà partir de∗ ： 21.46 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Carbide Stepped Drill, for Drilling Pilot Holes for Screws, with Chamfering Blade, Size Designation Model
MISUMI
The desired stepped drill can be ordered without a drawing. Delivered in a short delivery timeConfigurer maintenantDélai d'expédition minimum ： 12 jours -
Configurer maintenant
à partir de∗ ： 19.21 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret en carbure à tige droite et à pointe monobloc
FUKUDA
A carbide tip is brazed, is ideal for drilling aluminum alloy, cast iron, etc.Configurer maintenantà partir de∗ ： 288.81 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Jeu de forets à tige droite, 3 x D RT100U 2473
GUHRING
[Features]
· With Guhring's unique R-Blade, it is excellent in dividing and discharging cutting chips and enables high efficiency and high speed machining.- Remise sur volume
Configurer maintenantà partir de∗ ： 102.26 € Délai d'expédition minimum ： 24 jours *Prix unitaire/configuration de base
-
CoroDrill Delta-C, foret en carbure monobloc
SANDVIK
Solid drill providing high accuracy surface roughness ideal for drilling any kind of workpiece.Configurer maintenantà partir de∗ ： 512.87 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret Aqua EX type plat à longue tige AQDEXZLS
NACHI(FUJIKOSHI)
180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.Configurer maintenantà partir de∗ ： 132.76 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret plat en carbure ADFLS-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.- Remise sur volume
Configurer maintenantà partir de∗ ： 89.70 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
TS Coated Carbide Composite Spiral Drill, Stub Model
MISUMI
Composite helix drill with high durability for raw materials- Remise sur volume
Configurer maintenantà partir de∗ ： 96.26 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes)
MISUMI
Can be machined up to finish drilling in a single shot. Drill With Burnishing Blade- Remise sur volume
Configurer maintenantà partir de∗ ： 61.06 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide 3-Flute Drill, Stub Model, Regular
MISUMI
3-flute drill with outstanding afferent * If the chip flow is not good, perform the appropriate step process depending on the chip flow condition- Remise sur volume
Configurer maintenantà partir de∗ ： 57.87 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Double Margin Drill, Regular
MISUMI
Achieves high accuracy and stable processing with the double margin- Remise sur volume
Configurer maintenantà partir de∗ ： 78.36 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular
MISUMI
By applying three rake + R thinning, it demonstrates a high level of afferent.- Remise sur volume
Configurer maintenantà partir de∗ ： 56.44 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular
MISUMI
A straight shank type of drill with corner radius- Remise sur volume
Configurer maintenantà partir de∗ ： 44.85 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub
MISUMI
A drill for high-speed and high feed machining with diameter plus tolerance- Remise sur volume
Configurer maintenantà partir de∗ ： 42.01 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular
MISUMI
Capable of high feed and high speed cutting on everything from standard steel to stainless steel.- Remise sur volume
Configurer maintenantà partir de∗ ： 49.75 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular
MISUMI
High-speed and high-feed drill with oil holes that further improves the efficiency- Remise sur volume
Configurer maintenantà partir de∗ ： 111.36 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model
MISUMI
Straight shank series of the popular high-speed and high-feed machining drill- Remise sur volume
Configurer maintenantà partir de∗ ： 37.87 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model
MISUMI
Ideal for high-precision small diameter drilling.- Remise sur volume
Configurer maintenantà partir de∗ ： 38.08 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Regular
MISUMI
A carbide drill with high versatility is available at an astonishing low price- Remise sur volume
Configurer maintenantà partir de∗ ： 24.74 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Regular Model with Oil Holes
MISUMI
A drill with oil holes that achieves high-efficiency machining- Remise sur volume
Configurer maintenantà partir de∗ ： 87.11 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Drill, Straight Shank / Regular
MISUMI
High-speed cutting is supported with the use of the TiAlN coating.- Remise sur volume
Configurer maintenantà partir de∗ ： 23.12 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Carbide Drill, Straight Shank / Stub
MISUMI
A general-purpose carbide drill that supports a wide range of applications.- Remise sur volume
Configurer maintenantà partir de∗ ： 11.46 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Carbide Drill, Straight Shank / Regular
MISUMI
A general-purpose carbide drill that supports a wide range of applications.- Remise sur volume
Configurer maintenantà partir de∗ ： 13.09 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Long Drill, Straight Shank
MISUMI
Carbide long drill that achieves the high efficiency deep-hole drilling- Remise sur volume
Configurer maintenantà partir de∗ ： 100.26 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular
MISUMI
A small radius type of the high-hardness steel series- Remise sur volume
Configurer maintenantà partir de∗ ： 43.70 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
DLC Coated Carbide Drill for Aluminum Machining, Regular
MISUMI
DLC coated drill that's dedicated for aluminum alloy- Remise sur volume
Configurer maintenantà partir de∗ ： 87.13 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Carbide Burnishing Drill, Straight Model
MISUMI
High-precision drilling of aluminum is achieved without a pilot holeConfigurer maintenantDélai d'expédition minimum ： 8 jours -
Carbide Burnishing Drill, Stepped Model
MISUMI
High-precision drilling of aluminum is achieved without a pilot holeConfigurer maintenantDélai d'expédition minimum ： 8 jours -
TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular
MISUMI
A drill for cast iron that's ideal for mass production- Remise sur volume
Configurer maintenantà partir de∗ ： 72.95 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
TiAlN Coated Carbide Stepped Drill, For Bolt Drilling / For Drilling Pilot Holes for Screws, with Chamfering Blade
MISUMI
The stepped drill reduces the number of steps to achieve the high efficiency in drilling- Remise sur volume
Configurer maintenantà partir de∗ ： 84.87 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub
MISUMI
Reduction of the number of steps achieves high efficiency in drilling pilot holes- Remise sur volume
Configurer maintenantà partir de∗ ： 101.88 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Foret Aqua, 3 cannelures AQD3F
NACHI(FUJIKOSHI)
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.Configurer maintenantà partir de∗ ： 116.31 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Foret Aqua type standard AQDR
NACHI(FUJIKOSHI)
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.- Remise sur volume
Configurer maintenantà partir de∗ ： 87.80 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum |
| Hole diameter (drill diameter) D(mm) |
| Groove Length L(mm) |
| work material |
| Tool Material Type |
| Overall Length L(mm) |
| Shank Type |
| Coating Y/N |
| Coating Type |
| With/without Oil Hole |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | NACHI(FUJIKOSHI) | OMIKOGYO | OSG | ATOM | OSG | NACHI(FUJIKOSHI) | DIXI | GUHRING | GUHRING | MISUMI | MISUMI | MISUMI | MISUMI | UNION TOOL | FUKUDA | GUHRING | SANDVIK | NACHI(FUJIKOSHI) | OSG | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Série du produit | Très faible diamètre, en carbure type extra-court pour usinage de précision WX-MS-GDS | Foret en carbure type moyen pour usinage de métaux non ferreux NF-GDN | TiAlN Coated Carbide Burnishing Bladed Drill, Stub (No Oil Holes), Regular (with Oil Holes) | TiAlN Coated Carbide Drill, Corrugated Cutting Edge / Regular | TiAlN Coated Carbide Drill with Corner Radius, Straight Shank / Stub Model, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Stub | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, With Oil Holes / Stub, Regular | TiAlN Coated Carbide High-Speed High-Feed Machining Drill, Straight Shank / Stub, Regular Model | TiAlN Coated Carbide Small-Diameter Drill, 0.01 mm / 0.05 mm Unit Diameter Designation Model | TS Coated Carbide Drill for High-Hardness Steel Machining, Small Diameter / Stub / Regular | TiAlN Coated Carbide Drill for Cast Iron Machining, 3-Flute / Regular | DLC Coated Carbide Stepped Drill for Aluminum Machining, Stub | ||||||||||||||||||||||||||||||||
| à partir de∗ | 88.05 € *Prix unitaire/configuration de base | 333.54 € *Prix unitaire/configuration de base Remise sur volume | 31.40 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 30.72 € *Prix unitaire/configuration de base Remise sur volume | 18.82 € *Prix unitaire/configuration de base Remise sur volume | 53.04 € *Prix unitaire/configuration de base | 27.26 € *Prix unitaire/configuration de base | 116.22 € *Prix unitaire/configuration de base Remise sur volume | 190.15 € *Prix unitaire/configuration de base | 47.71 € *Prix unitaire/configuration de base Remise sur volume | 25.57 € *Prix unitaire/configuration de base Remise sur volume | 21.46 € *Prix unitaire/configuration de base Remise sur volume | - | 19.21 € *Prix unitaire/configuration de base | 288.81 € *Prix unitaire/configuration de base | 102.26 € *Prix unitaire/configuration de base Remise sur volume | 512.87 € *Prix unitaire/configuration de base | 132.76 € *Prix unitaire/configuration de base | 89.70 € *Prix unitaire/configuration de base Remise sur volume | 96.26 € *Prix unitaire/configuration de base Remise sur volume | 61.06 € *Prix unitaire/configuration de base Remise sur volume | 57.87 € *Prix unitaire/configuration de base Remise sur volume | 78.36 € *Prix unitaire/configuration de base Remise sur volume | 56.44 € *Prix unitaire/configuration de base Remise sur volume | 44.85 € *Prix unitaire/configuration de base Remise sur volume | 42.01 € *Prix unitaire/configuration de base Remise sur volume | 49.75 € *Prix unitaire/configuration de base Remise sur volume | 111.36 € *Prix unitaire/configuration de base Remise sur volume | 37.87 € *Prix unitaire/configuration de base Remise sur volume | 38.08 € *Prix unitaire/configuration de base Remise sur volume | 24.74 € *Prix unitaire/configuration de base Remise sur volume | 87.11 € *Prix unitaire/configuration de base Remise sur volume | 23.12 € *Prix unitaire/configuration de base Remise sur volume | 11.46 € *Prix unitaire/configuration de base Remise sur volume | 13.09 € *Prix unitaire/configuration de base Remise sur volume | 100.26 € *Prix unitaire/configuration de base Remise sur volume | 43.70 € *Prix unitaire/configuration de base Remise sur volume | 87.13 € *Prix unitaire/configuration de base Remise sur volume | - | - | 72.95 € *Prix unitaire/configuration de base Remise sur volume | 84.87 € *Prix unitaire/configuration de base Remise sur volume | 101.88 € *Prix unitaire/configuration de base Remise sur volume | 116.31 € *Prix unitaire/configuration de base | 87.80 € *Prix unitaire/configuration de base |
| Délai d'expédition minimum | 5 jours | 10 jours | Jour même | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 5 jours | 5 jours | 5 jours | 12 jours | 6 jours | 6 jours | 24 jours | 6 jours | 6 jours | 6 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 5 jours | 8 jours | 8 jours | 5 jours | 5 jours | 5 jours | 6 jours | 6 jours |
| Hole diameter (drill diameter) D(mm) | 0.5 ～ 15.8 | 10 | 0.19 ～ 5 | 0.3 ～ 13 | 3 ～ 13 | 4 ～ 12.5 | 0.4 ～ 3 | 3 ～ 20 | 1.4 ～ 3 | 3 ～ 13 | 0.3 ～ 6 | 1 ～ 8 | - | 0.3 ～ 2 | 6 ～ 25 | 3 ～ 16 | 13 ～ 14.5 | 3.7 ～ 7.9 | 3 ～ 20 | 3 ～ 12 | 3 ～ 13 | 2 ～ 13 | 1 ～ 11 | 3 ～ 13 | 3 ～ 13 | 3 ～ 8 | 3 ～ 13 | 4.2 ～ 7 | 3 ～ 13 | 0.38 ～ 2.7 | 0.3 ～ 13 | 3 ～ 13 | 1 ～ 8 | 0.5 ～ 8 | 1 ～ 7.5 | 3 ～ 10 | 0.8 ～ 3 | 5.52 ～ 11.38 | 0 | - | 5 ～ 12 | 3.4 ～ 10.3 | 6.8 ～ 10.3 | 4.21 ～ 12.55 | 3.7 ～ 10 |
| Groove Length L(mm) | 1.65 ～ 72 | 115 | 1.2 ～ 26 | 15 ～ 120 | 25 ～ 76 | 22 ～ 51 | 6 ～ 12 | 28 ～ 101 | 25 ～ 54 | 20 ～ 60 | 2 ～ 28 | 6 ～ 37 | - | 1.5 ～ 10 | 60 ～ 160 | 16 ～ 58 | 56 ～ 59 | 18 ～ 36 | 15 ～ 88 | 20 ～ 55 | 20 ～ 71 | 12 ～ 77 | 12 ～ 71 | 28 ～ 77 | 16 ～ 77 | 20 ～ 41 | 28 ～ 77 | 24 ～ 53 | 16 ～ 78 | 6 ～ 12 | 3 ～ 77 | 28 ～ 77 | 12 ～ 75 | 3 ～ 37 | 12 ～ 69 | 60 ～ 140 | 6 ～ 27 | 41 ～ 71 | 0 | - | 44 ～ 71 | 21 ～ 72 | 48 ～ 72 | 22 ～ 51 | 24 ～ 60 |
| work material | Fonte[◎] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[◎] | Fonte[○] | Fonte[◎] | Fonte[◎] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[◎] | Fonte[◎] | Fonte[○] | Fonte[◎] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[◎] | Fonte[○] | Fonte[○] | Fonte[○] | Fonte[○] |
| Tool Material Type | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | - | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure | Carbure |
| Overall Length L(mm) | 47 ～ 115 | 165 | 38 ～ 64 | 75 ～ 250 | 59 ～ 128 | 54 ～ 110 | 30 ～ 46 | 66 ～ 153 | 62 ～ 87 | 66 ～ 107 | 38 ～ 66 | 26 ～ 79 | - | 38 | 115 ～ 240 | 46 ～ 115 | 124 ～ 133 | 100 ～ 120 | 100 ～ 250 | 50 ～ 115 | 62 ～ 124 | 46 ～ 124 | 45 ～ 118 | 66 ～ 124 | 49 ～ 124 | 62 ～ 79 | 66 ～ 124 | 66 ～ 91 | 46 ～ 137 | 38 | 38 ～ 124 | 66 ～ 124 | 34 ～ 117 | 20 ～ 79 | 34 ～ 109 | 100 ～ 200 | 47 ～ 67 | 85 ～ 128 | 40 ～ 60 | 40 ～ 60 | 82 ～ 118 | 73 ～ 136 | 104 ～ 136 | 66 ～ 110 | 56 ～ 110 |
| Shank Type | Tige de fraise / Tige droite | Tige de fraise | Tige de fraise / Tige droite | Tige droite | Tige de fraise / Tige droite | Tige de fraise / Tige droite | Tige droite | Tige de fraise | - | Tige de fraise | Tige de fraise | Tige droite | Tige droite | Tige de fraise | Tige de fraise | Tige droite | Tige de fraise | Tige de fraise | Tige de fraise / Tige droite | Tige de fraise | Tige de fraise | Tige de fraise | Tige de fraise | Tige de fraise | Tige droite | Tige de fraise | Tige de fraise | Tige de fraise | Tige droite | Tige de fraise | Tige de fraise | Tige de fraise | Tige droite | Tige droite | Tige droite | Tige droite | Tige de fraise | Tige de fraise | Tige de fraise | Tige de fraise | Tige de fraise | Tige droite | Tige droite | Tige de fraise / Tige droite | Tige de fraise / Tige droite |
| Coating Y/N | Disponible | N/A | Disponible | N/A | N/A | Disponible | N/A | Disponible | Disponible | Disponible | Disponible | Disponible | N/A | Disponible | N/A | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | Disponible | N/A | N/A | Disponible | Disponible | Disponible | N/A | N/A | Disponible | Disponible | Disponible | Disponible | Disponible |
| Coating Type | Autre | - | Autre | Non revêtu | Non revêtu | Autre | - | Autre | Autre | TiAlN | TiAlN | TiAlN | - | TiCN | - | Autre | TiAlN | Autre | Autre | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | - | TiAlN | - | DLC | - | - | TiAlN | TiAlN | DLC | Autre | Autre |
| With/without Oil Hole | N/A | Disponible | N/A | N/A | N/A | N/A | N/A | Disponible | Disponible | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Disponible | N/A | N/A | N/A | Disponible / N/A | N/A | N/A | N/A | N/A | N/A | N/A | Disponible | N/A | N/A | N/A | Disponible | N/A | N/A | N/A | Disponible / N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
-
Hole diameter (drill diameter) D(mm)
-
0～0.995
- 0
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.035
- 0.04
- 0.045
- 0.05
- 0.055
- 0.06
- 0.065
- 0.07
- 0.075
- 0.08
- 0.085
- 0.09
- 0.095
- 0.1
- 0.105
- 0.11
- 0.115
- 0.12
- 0.125
- 0.13
- 0.135
- 0.14
- 0.145
- 0.15
- 0.155
- 0.16
- 0.165
- 0.17
- 0.175
- 0.18
- 0.185
- 0.19
- 0.195
- 0.2
- 0.205
- 0.21
- 0.215
- 0.22
- 0.225
- 0.23
- 0.235
- 0.24
- 0.245
- 0.25
- 0.255
- 0.26
- 0.265
- 0.27
- 0.275
- 0.28
- 0.285
- 0.29
- 0.295
- 0.3
- 0.305
- 0.31
- 0.315
- 0.32
- 0.325
- 0.33
- 0.335
- 0.34
- 0.345
- 0.35
- 0.355
- 0.36
- 0.365
- 0.37
- 0.375
- 0.38
- 0.385
- 0.39
- 0.395
- 0.4
- 0.405
- 0.41
- 0.415
- 0.42
- 0.425
- 0.43
- 0.435
- 0.44
- 0.445
- 0.45
- 0.455
- 0.46
- 0.465
- 0.47
- 0.475
- 0.48
- 0.485
- 0.49
- 0.495
- 0.5
- 0.505
- 0.51
- 0.515
- 0.52
- 0.525
- 0.53
- 0.535
- 0.54
- 0.545
- 0.55
- 0.555
- 0.56
- 0.565
- 0.57
- 0.575
- 0.58
- 0.585
- 0.59
- 0.595
- 0.6
- 0.605
- 0.61
- 0.615
- 0.62
- 0.625
- 0.63
- 0.635
- 0.64
- 0.645
- 0.65
- 0.655
- 0.66
- 0.665
- 0.67
- 0.675
- 0.68
- 0.685
- 0.69
- 0.695
- 0.7
- 0.705
- 0.71
- 0.715
- 0.72
- 0.725
- 0.73
- 0.735
- 0.74
- 0.745
- 0.75
- 0.755
- 0.76
- 0.765
- 0.77
- 0.775
- 0.78
- 0.785
- 0.79
- 0.795
- 0.8
- 0.805
- 0.81
- 0.815
- 0.82
- 0.825
- 0.83
- 0.835
- 0.84
- 0.845
- 0.85
- 0.855
- 0.86
- 0.865
- 0.87
- 0.875
- 0.88
- 0.885
- 0.89
- 0.895
- 0.9
- 0.905
- 0.91
- 0.915
- 0.92
- 0.925
- 0.93
- 0.935
- 0.94
- 0.945
- 0.95
- 0.955
- 0.96
- 0.965
- 0.97
- 0.975
- 0.98
- 0.985
- 0.99
- 0.995
-
1～1.995
- 1
- 1.005
- 1.01
- 1.015
- 1.02
- 1.025
- 1.03
- 1.035
- 1.04
- 1.045
- 1.05
- 1.055
- 1.06
- 1.065
- 1.07
- 1.075
- 1.08
- 1.085
- 1.09
- 1.095
- 1.1
- 1.105
- 1.11
- 1.115
- 1.12
- 1.125
- 1.13
- 1.135
- 1.14
- 1.145
- 1.15
- 1.155
- 1.16
- 1.165
- 1.17
- 1.175
- 1.18
- 1.185
- 1.19
- 1.195
- 1.2
- 1.205
- 1.21
- 1.215
- 1.22
- 1.225
- 1.23
- 1.235
- 1.24
- 1.245
- 1.25
- 1.255
- 1.26
- 1.265
- 1.27
- 1.275
- 1.28
- 1.285
- 1.29
- 1.295
- 1.3
- 1.305
- 1.31
- 1.315
- 1.32
- 1.325
- 1.33
- 1.335
- 1.34
- 1.345
- 1.35
- 1.355
- 1.36
- 1.365
- 1.37
- 1.375
- 1.38
- 1.385
- 1.39
- 1.395
- 1.4
- 1.405
- 1.41
- 1.415
- 1.42
- 1.425
- 1.43
- 1.435
- 1.44
- 1.445
- 1.45
- 1.455
- 1.46
- 1.465
- 1.47
- 1.475
- 1.48
- 1.485
- 1.49
- 1.495
- 1.5
- 1.505
- 1.51
- 1.515
- 1.52
- 1.525
- 1.53
- 1.535
- 1.54
- 1.545
- 1.55
- 1.555
- 1.56
- 1.565
- 1.57
- 1.575
- 1.58
- 1.585
- 1.59
- 1.595
- 1.6
- 1.605
- 1.61
- 1.615
- 1.62
- 1.625
- 1.63
- 1.635
- 1.64
- 1.645
- 1.65
- 1.655
- 1.66
- 1.665
- 1.67
- 1.675
- 1.68
- 1.685
- 1.69
- 1.695
- 1.7
- 1.705
- 1.71
- 1.715
- 1.72
- 1.725
- 1.73
- 1.735
- 1.74
- 1.745
- 1.75
- 1.755
- 1.76
- 1.765
- 1.77
- 1.775
- 1.78
- 1.785
- 1.79
- 1.795
- 1.8
- 1.805
- 1.81
- 1.815
- 1.82
- 1.825
- 1.83
- 1.835
- 1.84
- 1.845
- 1.85
- 1.855
- 1.86
- 1.865
- 1.87
- 1.875
- 1.88
- 1.885
- 1.89
- 1.895
- 1.9
- 1.905
- 1.91
- 1.915
- 1.92
- 1.925
- 1.93
- 1.935
- 1.94
- 1.945
- 1.95
- 1.955
- 1.96
- 1.965
- 1.97
- 1.975
- 1.98
- 1.985
- 1.99
- 1.995
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.864
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.95
- 6
- 6.01
- 6.02
- 6.03
- 6.04
- 6.05
- 6.06
- 6.07
- 6.08
- 6.09
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.375
- 6.4
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
-
7～7.98
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.14
- 7.2
- 7.3
- 7.35
- 7.36
- 7.38
- 7.4
- 7.5
- 7.52
- 7.54
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
- 7.95
- 7.98
-
8～8.9
- 8
- 8.01
- 8.02
- 8.03
- 8.04
- 8.05
- 8.06
- 8.07
- 8.08
- 8.09
- 8.1
- 8.2
- 8.3
- 8.33
- 8.4
- 8.5
- 8.58
- 8.6
- 8.7
- 8.73
- 8.8
- 8.9
-
9～9.97
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.13
- 9.2
- 9.21
- 9.24
- 9.25
- 9.26
- 9.3
- 9.36
- 9.38
- 9.4
- 9.5
- 9.52
- 9.54
- 9.55
- 9.6
- 9.7
- 9.8
- 9.9
- 9.92
- 9.95
- 9.97
-
10～10.9
- 10
- 10.01
- 10.02
- 10.03
- 10.04
- 10.05
- 10.06
- 10.07
- 10.08
- 10.09
- 10.1
- 10.2
- 10.3
- 10.32
- 10.4
- 10.5
- 10.6
- 10.7
- 10.72
- 10.8
- 10.9
-
11～11.95
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.2
- 11.22
- 11.24
- 11.3
- 11.36
- 11.38
- 11.4
- 11.5
- 11.51
- 11.56
- 11.6
- 11.7
- 11.8
- 11.9
- 11.91
- 11.95
-
12～12.96
- 12
- 12.01
- 12.02
- 12.03
- 12.04
- 12.05
- 12.06
- 12.07
- 12.08
- 12.09
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.55
- 12.6
- 12.7
- 12.8
- 12.9
- 12.96
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.49
- 13.5
- 13.6
- 13.7
- 13.8
- 13.89
- 13.9
-
14～14.96
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
- 14.96
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.67
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30～30.5
- 30
- 30.5
-
31～31.5
- 31
- 31.5
-
32～32.5
- 32
- 32.5
-
33～33.5
- 33
- 33.5
-
34～34.5
- 34
- 34.5
-
35～35.5
- 35
- 35.5
-
36～36.5
- 36
- 36.5
-
37～37.5
- 37
- 37.5
-
38～38.5
- 38
- 38.5
-
39～39.5
- 39
- 39.5
-
40～40.5
- 40
- 40.5
-
41～41.5
- 41
- 41.5
-
42～42.5
- 42
- 42.5
-
43～43.5
- 43
- 43.5
-
44～44.5
- 44
- 44.5
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50
-
55
-
60
-
-
Groove Length L(mm)
-
0～0.9
- 0
- 0.015
- 0.025
- 0.04
- 0.05
- 0.06
- 0.075
- 0.08
- 0.09
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.18
- 0.2
- 0.22
- 0.24
- 0.25
- 0.3
- 0.33
- 0.4
- 0.44
- 0.48
- 0.5
- 0.55
- 0.6
- 0.7
- 0.8
- 0.88
- 0.9
-
1～1.98
- 1
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.6
- 1.65
- 1.7
- 1.8
- 1.9
- 1.98
-
2～2.8
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
-
3～3.9
- 3
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.7
- 4.8
- 4.9
-
5～5.8
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.7
- 5.8
-
6～6.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.8
-
7～7.8
- 7
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.8
-
8～8.8
- 8
- 8.3
- 8.4
- 8.5
- 8.6
- 8.8
-
9～9.8
- 9
- 9.2
- 9.3
- 9.5
- 9.6
- 9.8
-
10～10.8
- 10
- 10..1
- 10.2
- 10.5
- 10.8
-
11～11.7
- 11
- 11.1
- 11.3
- 11.4
- 11.7
-
12～12.8
- 12
- 12.2
- 12.3
- 12.5
- 12.6
- 12.8
-
13～13.8
- 13
- 13.1
- 13.2
- 13.5
- 13.8
-
14～14.9
- 14
- 14.3
- 14.4
- 14.5
- 14.8
- 14.9
-
15～15.8
- 15
- 15.3
- 15.6
- 15.8
-
16～16.8
- 16
- 16.1
- 16.2
- 16.5
- 16.7
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.6
- 17.8
-
18～18.9
- 18
- 18.5
- 18.6
- 18.8
- 18.9
-
19～19.8
- 19
- 19.2
- 19.4
- 19.5
- 19.7
- 19.8
-
20～20.7
- 20
- 20.3
- 20.4
- 20.7
-
21～21.8
- 21
- 21.2
- 21.4
- 21.6
- 21.8
-
22～22.8
- 22
- 22.1
- 22.2
- 22.5
- 22.8
-
23～23.9
- 23
- 23.3
- 23.4
- 23.9
-
24～24.8
- 24
- 24.3
- 24.5
- 24.6
- 24.8
-
25～25.8
- 25
- 25.2
- 25.5
- 25.7
- 25.8
-
26～26.6
- 26
- 26.1
- 26.3
- 26.4
- 26.6
-
27～27.8
- 27
- 27.6
- 27.8
-
28～28.8
- 28
- 28.1
- 28.2
- 28.5
- 28.8
-
29～29.4
- 29
- 29.3
- 29.4
-
30～30.8
- 30
- 30.6
- 30.8
-
31～31.7
- 31
- 31.2
- 31.5
- 31.7
-
32～32.4
- 32
- 32.3
- 32.4
-
33～33.8
- 33
- 33.6
- 33.8
-
34～34.8
- 34
- 34.1
- 34.5
- 34.8
-
35～35.5
- 35
- 35.3
- 35.5
-
36～36.8
- 36
- 36.5
- 36.8
-
37～37.5
- 37
- 37.5
-
38～38.3
- 38
- 38.3
-
39～39.8
- 39
- 39.8
-
40～40.5
- 40
- 40.5
-
41～41.3
- 41
- 41.3
-
42～42.8
- 42
- 42.8
-
43～43.5
- 43
- 43.5
-
44～44.3
- 44
- 44.3
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
110
-
111
-
112
-
114
-
115
-
116
-
117
-
118
-
120
-
122
-
124
-
125
-
127
-
128
-
130
-
132
-
133
-
135
-
136
-
137
-
140
-
143
-
145
-
146
-
150
-
152
-
153
-
154
-
155
-
156
-
159
-
160
-
162
-
163
-
165
-
167
-
168
-
170
-
171
-
175
-
176
-
177
-
180
-
182
-
183
-
185
-
188
-
190
-
195
-
197
-
198
-
200
-
205
-
207
-
208
-
210
-
212
-
214
-
218
-
220
-
222
-
223
-
227
-
230
-
232
-
234
-
240
-
242
-
248
-
250
-
252
-
253
-
258
-
260
-
263
-
265
-
272
-
274
-
277
-
280
-
282
-
292
-
295
-
300
-
302
-
310
-
318
-
322
-
323
-
327
-
330
-
337
-
340
-
343
-
350
-
360
-
372
-
385
-
400
-
402
-
432
-
440
-
460
-
512
-
550
-
692
-
860
-
1030
-
-
work material
- Acier général
- Acier trempé et durci
- Acier à dureté élevée
- Acier inoxydable
- Fonte
- Aluminium
- Titane
- Cuivre
- Graphite
- Résine
-
Tool Material Type
- Carbure
- PCD
-
Overall Length L(mm)
-
Shank Type
-
Tige de fraise
-
Tige droite
-
Tige conique
-
Tige de fraise
-
Coating Y/N
- Disponible
- N/A
-
Coating Type
-
With/without Oil Hole
Fabricant
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Forets en carbure »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.