Clés à six pans（Tip Type：Bille）

?* À propos du délai d'expédition et des prix

• 

  Jeu de clés à tête sphérique (lot de 9)

  WAKAHOI SEISAKU

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	122.67 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé à tête sphérique, en L, longue, tige courte

  MAEDAKINNZOKU

  A long hex bar wrench which is machined with a ball point and uses special alloy allows for exact work and improves safety.
  [Features]
  · Ideal for the tightening and loosening of hex socket bolts and hex socket set screws in places with height restrictions.
  · Minimized neck length L-shaped long type.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · Uses a special alloy to enhance torque, durability, and abrasion resistance.
  · High-level heat treatment/hard chrome plating treatment.
  [Applications]
  · Ideal for assembly of industrial machinery and electronic equipment, and for assembly and maintenance work of automobiles, motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.08 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale en T, puissante, tête sphérique

  MITOLOY

  [Features]
  · Ideal for deep places.
  · Powerful fastening is possible.
  · Work efficiency is improved with a mechanism for rapid turning.
  · Strength is outstanding.
  [Applications]
  · For tightening and loosening of hex socket bolts and set screws during work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	31.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé Allen en T (agrippe-écrou, poignée en fer, longue)

  EIGHT TOOL

  [Features]
  · The total length of the underneck part is as long as 500 mm, optimal for tightening screws at deep positions.
  · Fit ring embedded in the Taper Head catches cap bolt firmly, and you can insert the bolt into the desired screw hole with one hand only, for easy bolt exchange work in deep places and gaps.
  [Applications]
  · For tightening hex socket head bolts.

  • Remise sur volume

  • Stock

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	78.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé à tête sphérique, en L, tige courte

  MAEDAKINNZOKU

  A hex bar wrench that prevents abrasion of the hex portion and features both high strength and toughness.
  [Features]
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · Uses a special alloy to enhance torque, durability, and abrasion resistance.
  · Prevents wearing of the hexagon part with high-level heat treatment/hard chrome plating treatment.
  · L-shaped standard type with short underhead.
  · Abrasion of hex parts is prevented, with its toughness (resistance to breaking) increased along with reliable work and safety while the strength level is high.
  [Applications]
  · Ideal for assembly and maintenance work of industrial machinery and electronic equipment, automobiles, motorcycles and bicycles.
  · Convenient for the tightening and loosening of hex socket bolts and hex socket set screws in places with height restrictions.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.88 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Made of chrome vanadium steel (Cr-V).
  · This product has black oxide surface processing.
  · The hardness is HRC 52-56.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.32 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, col court, 100°, à tête sphérique, longue, avec bille de maintien

  TRUSCO NAKAYAMA

  [Features]
  · In order to prevent fingertips from touching the work surface, the bend angle is increased from the conventional 90° to 100° for better usability.
  · Made from chrome vanadium steel.
  · The length in the short direction is set to approximately half the conventional standard, extremely effective for working in confined spaces.
  · Equipped with a catcher ball at the tip (3 mm or more).
  · The hardness is HRC 53-57.
  [Applications]
  · Tightening and loosening work for hex socket bolts and hex socket set screws.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	122.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, sphériques, tête courte

  PB SWISS TOOLS

  A hex bar wrench with inimitable measurement accuracy, that keeps the work site tidy.
  [Features]
  · Professional users can select tools to suit their purposes from the extensive product lineup.
  · Manufacturing error in all L-shaped wrenches is no more than the thickness of a hair regardless of the size.
  · A precision tool with excellent durability is created by adoption of this second to none dimension accuracy and tough special alloy.
  [Applications]
  · The L-shaped hex wrench (mm) is widely used in machinery, metal products, and automotive industries all over the world.
  · Sizes are from 0.71 up to 22 mm.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	81.23 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, à tête sphérique

  ASAHI METAL INDUSTRY

  [Features]
  · Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
  · Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
  · Hardness: HRC 54-59
  [Applications]
  · Tightening and loosening work for hex socket bolts and hex socket set screws.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	48.90 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés à tête sphérique, courtes sous col, type L, BS900S

  MAEDAKINNZOKU

  A short hex bar wrench set that prevents abrasion of the hex portion and features both high strength and toughness.
  [Features]
  · Ideal for the tightening and loosening of hex socket bolts and hex socket set screws in places with height restrictions.
  · Holder included. Mass: 0.26 kg.
  · Uses a special alloy to enhance torque, durability, and abrasion resistance.
  · High-level heat treatment/hard chrome plating treatment.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · 9-piece set. L-shaped standard type with short underhead.
  [Applications]
  · Ideal for assembly of industrial machinery and electronic equipment, and for assembly and maintenance work of automobiles, motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	72.14 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés longues, à tête sphérique, courtes sous col, type L, BL900S

  MAEDAKINNZOKU

  Hexagonal bar wrench ideal for tightening/loosening hexagonal socket bolts and screws in spaces where there are height restrictions.
  [Features]
  · Neck length has been minimized to be ideal for fastening/loosening work in places with limited height.
  · Made of special alloy steel that enhances high torque, durability, and wear resistance.
  · Prevents wearing of the hexagon part with high-level heat treatment/hard chrome plating treatment.
  · While it is significantly strong, the toughness is increased (resistant to breaking), improving reliable work and safety.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · A 9-piece set of L-shaped long type with a short underhead length.
  [Applications]
  · Ideal for assembly and maintenance work of industrial machinery and electronic equipment, and for assembly and maintenance work of automobiles, motorcycles, etc.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	104.92 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés, tête sphérique, longues, type L, SBL700

  MAEDAKINNZOKU

  Set of ballpoint L-Type wrenches featuring durability and rust resistance.
  [Features]
  · Made of martensitic material which emphasizes strength and is rust resistant.
  · Stainless steel tool with excellent corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · For food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants.
  · For waterproofing work, plumbing and cleaning equipment, etc.
  · Optimal for locations that use stainless steel bolts and nuts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	168.71 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Clé sphérique type L, longue

  MAEDAKINNZOKU

  A long hex bar wrench machined with a ball point, enabling rapid turning in oblique work and temporary tightening.
  [Applications]
  · Made of special alloy steel that enhances high torque, durability, and wear resistance.
  · Prevents wearing of the hexagon part with high-level heat treatment/hard chrome plating treatment.
  · High strength and increased toughness (resilience against impact and destruction), improving reliable work and safety.
  · The setting of the ideal heat treatment conditions improves hardness at a maximum of 15%.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · The ballpoint part is thin. Avoid applying too much force.
  [Applications]
  · Ideal for assembly and maintenance of industrial machinery and electronic equipment, and for assembly and maintenance of automobiles, motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé sphérique type L

  MAEDAKINNZOKU

  L type hexagonal bar wrench made of special alloy steel that enhances high torque, durability, and wear resistance.
  [Features]
  · Various strength-enhancing alloy elements are blended, realizing high torque properties and toughness (tenacious and impact resistant).
  · Based on high-level heat treatment and hard chrome plating treatment, durability and wear resistance are increased, and accurate work and safety are improved.
  · The setting of the ideal heat treatment conditions improves hardness at a maximum of 15%.
  · Standard type.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  [Applications]
  · Ideal for assembly and maintenance work of industrial machinery, electronic equipment, automobiles, motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés, tige sphérique longue, type L, BL900

  MAEDAKINNZOKU

  Hexagonal bar wrench set made of special alloy steel that enhances high torque, durability, and wear resistance.
  [Features]
  · Various strength-enhancing alloy elements are blended, realizing high torque properties and toughness (tenacious and impact resistant).
  · Based on high-level heat treatment and hard chrome plating treatment, durability and wear resistance are increased, and accurate work and safety are improved.
  · The setting of the ideal heat treatment conditions improves hardness at a maximum of 15%.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  · Long type, 9-piece set.
  [Applications]
  · Ideal for assembly and maintenance work of industrial machinery, electronic equipment, automobiles, motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	93.06 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé sphérique type L, longue, SBL

  MAEDAKINNZOKU

  Ballpoint L-Type wrench featuring durability and rust resistance.
  [Features]
  · Made of martensitic material which emphasizes strength and is rust resistant.
  · Stainless steel tool with excellent corrosion resistance, chemical resistance and hygiene.
  [Applications]
  · For food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants.
  · For waterproofing work, plumbing and cleaning equipment, etc.
  · Optimal for locations that use stainless steel bolts and nuts.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.61 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clés à tête sphérique (jeu / pièce seule)

  HOZAN

  A long size 7 hex bar wrench set that is an easy-to-use ball point type.
  [Features]
  · Includes a dedicated holder that can set 7 pieces from 1.5 to 6 mm.
  · The basic hardening treatment for body strength is skilled full quenching.
  · The special alloy steel used has been carefully selected and given hard chrome plating on the surface to provide excellent corrosion resistance and wear resistance.
  · A ball-point type that can be used on bolts positioned at an angle where the hex socket is hard to match, by tilting it up to about 20°.
  · Long type for easy application of force even when loosening tightened bolts.
  [Applications]
  · Supports a wide range of work contexts.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Jeu de clés sphériques type L, BS900

  MAEDAKINNZOKU

  Standard hexagonal bar wrench set made of special alloy steel that enhances high torque, durability, and wear resistance.
  [Features]
  · Prevents wearing of the hexagon part with high-level heat treatment/hard chrome plating treatment.
  · While it is significantly strong, the toughness is increased (resistant to breaking), improving reliable work and safety.
  · The ball point finish enables quick turning and temporary tightening from a diagonal position.
  [Applications]
  · Ideal for assembly work of industrial machinery and electronic equipment, and for assembly and maintenance work of motorcycles and bicycles.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	76.22 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés à couple élevé, tête sphérique / type L (avec poignée de serrage)

  BONDHUS

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	103.38 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés très longues, hexagonales, à tête sphérique【9 pièces par conditionnement】

  SUPER TOOL

  [Features]
  · The ball point can be tilted up to a maximum of approximately 25°.
  · 1.5 and 2 are standard hexagon type.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	58.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé longue, hexagonale, à tête sphérique

  SUPER TOOL

  [Features]
  · The ball point can be tilted up to a maximum of approximately 25°.
  · 1.5 and 2 are standard hexagon type.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.43 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Jeu de clés longues, hexagonales, à tête sphérique

  SUPER TOOL

  [Features]
  · The ball point can be tilted up to a maximum of approximately 25°.
  · 1.5 and 2 are standard hexagon type.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, tige à tête sphérique très longue, autre tige, courte

  SUPER TOOL

  [Features]
  · The ball point can be tilted up to a maximum of approximately 25°.
  · For the short underneck, the short length (L2) is set to less than half the standard length.
  · Optimal for work in narrow spaces.
  · In order to prevent fingertips from touching the work surface, the bend angle has been set to 95°, a slightly wider angle than the standard.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	59.87 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé à tête sphérique, manche rapide

  ANEX

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.60 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Clé à tête sphérique, manche rapide【9 pièces par conditionnement】

  ANEX

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	70.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  « Clé Catcher » (avec ressort et billes d'acier)

  ASAHI METAL INDUSTRY

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.96 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clés hexagonales, tête sphérique, 9 couleurs (lot de 9 pièces)【9 pièces par conditionnement】

  ASAHI METAL INDUSTRY

  [Features]
  · Color-coding for each size makes the dimensions used verifiable with a glance.
  · Since the tip planar angle of the hexagonal bar is chamfered evenly on each side, it is easy to insert it into hexagon sockets.
  · Screws can be rotated from angles up to a maximum of 25° with the ballpoint tip, making work easy and quick even in narrow places.
  · The hardness is HRC 54-59.
  [Applications]
  · Tightening and loosening work for hex socket bolts and hex socket set screws.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	111.48 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé creuse hexagonale type L - tête sphérique - tronquée (col court)

  MITOLOY

  [Features]
  · Short underneck for ease of use in narrow places.
  · The ball point section is given high-precision broaching with the maximum inclination angle of 30°.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	5.96 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale creuse type L - tête sphérique - tronquée, longue (col court)

  MITOLOY

  [Features]
  · Short underneck for ease of use in narrow places.
  · The ball point section is given high-precision broaching with the maximum inclination angle of 30°.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale creuse type L - tête sphérique - Neo (long col)

  MITOLOY

  [Features]
  · The short side is twice the length of the conventional product (HBL).
  · Final tightening in deep areas is possible.
  · The ball point section is given high-precision broaching with the maximum inclination angle of 30°.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	99.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique【8 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is considered to fit the corners of the bottom of the hex socket for closer contact.
  · The hardness is HRC 54-59.
  · Made from chrome vanadium steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	64.69 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique (longue)【1-8 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Easily catches screws, allowing them to be quickly and easily fastened without wasted time.
  · The hardness is HRC 54-59.
  · Made from chrome vanadium steel.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.45 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique, longue, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Long type that allows users to easily exert force.
  · Made of chrome vanadium steel (Cr-V).
  · This product has black oxide surface processing.
  · The hardness is HRC 52-56.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.62 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé à six pans creux avec tête sphérique (revêtement en oxyde noir)【9-12 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Holder can be rotated to easily take out and put back different sizes of hex wrenches.
  · This product has black oxide surface processing.
  · The hardness is HRC 52-56.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	45.02 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique (courte)

  TRUSCO NAKAYAMA

  [Features]
  · Holder can be rotated to easily take out and put back different sizes of hex wrenches.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-58.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	3.92 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, à tête sphérique (9 pièces)【9 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact.
  · Matte chrome plating.
  · The hardness is HRC 52-56.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	54.67 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique, avec bille de maintien

  TRUSCO NAKAYAMA

  [Features]
  · Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
  · A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
  · It has a diagonal curve.
  · The hardness is HRC 53-57.
  [Applications]
  · Tightening of screws in narrow spaces.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	78.46 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé longue, hexagonale, à tête sphérique, avec bille de maintien

  TRUSCO NAKAYAMA

  [Features]
  · Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
  · A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
  · The hardness is HRC 53-57.
  [Applications]
  · Tightening of screws in narrow spaces.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	101.85 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique (tige courte)

  TRUSCO NAKAYAMA

  [Features]
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
  · Matte chrome plating.
  · The hardness is HRC 55-60.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	58.25 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique (longue, tige courte)

  TRUSCO NAKAYAMA

  [Features]
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
  · Matte chrome plating.
  · The hardness is HRC 55-60.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.10 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé tige longue, hexagonale, à tête sphérique

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for fastening in deep places.
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
  · Matte chrome plating.
  · The hardness is HRC 55-60.
  · Ideal for fastening in deep places.
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to easily take out and put back different sizes of wrenches.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	7.28 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale, poignée en T, à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Suitable for machine maintenance and maintenance repair work.
  · Can be used with one side of the ballpoint portion tilted 25°.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · Suitable for machine maintenance and maintenance repair work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, poignée en T, à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Suitable for machine maintenance and maintenance repair work.
  · Can be used with one side of the ballpoint portion tilted 25°.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · Suitable for machine maintenance and maintenance repair work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.89 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, poignée en T, à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · It can be set as a stand and can be hung from a wall using a hook hole.
  · Suitable for machine maintenance and maintenance repair work.
  · Can be used with one side of the ballpoint portion tilted 25°.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · Suitable for machine maintenance and maintenance repair work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	79.19 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, à tête sphérique, poignée en T

  TRUSCO NAKAYAMA

  [Features]
  · T handle type 2-point fastening type.
  · The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach.
  · The hardness is HRC 45-57.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.60 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...