Clés dynamométriques

?* À propos du délai d'expédition et des prix

• • Recommandation

  

  Clé dynamométrique préréglée

  TOHNICHI MFG

  [Caractéristiques]
  Lorsque le couple défini est atteint, la bascule s'active et un signal sonore informe l’utilisateur de l'achèvement du serrage.
  · La tête de la cé à cliquet a 24 dents et une amplitude de 15° pour un serrage exceptionnel dans les espaces étroits.
  · Le couple peut être facilement modifié par graduation.
  [Applications]
  · Pour les sites de travaux difficiles tels que les champs et ceux impliquant une exposition aux huiles et aux produits chimiques.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	142.44 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique paramétrable

  TOHNICHI MFG

  [Features]
  · A cost-saving torque wrench that can exchange heads according to the application, including wrenches, ring wrenches, ratchets, and hex heads, all with a single torque wrench.
  · When the set torque is reached, the toggle operates, and a light, clear signal sound lets the user know when tightening is complete.
  [Applications]
  · For tightening various screws for assembly and mass production.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	173.81 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tête femelle de cliquet RQH

  TOHNICHI MFG

  [Features]
  · The low tightening amplitude enables comfortable work in confined, height-restricted spaces.
  · Female type.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	105.16 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon de marquage (estampage), type N-MQLK

  NAKAMURA MFG

  [Features]
  · Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
  · Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
  · Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
  · The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
  · The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
  · For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
  · Red ink is included as an accessory.
  · Its simple structure makes maintenance easy
  · The accuracy is guaranteed up to ±3%.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	513.37 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique paramétrable

  TOHNICHI MFG

  [Features]
  · When the set torque is reached, the toggle operates, and a signal sound lets the user know when tightening is complete.
  · The ratchet head has 24 teeth and a 15-degree operating range. It shows excellent performance in space-limited working conditions.
  [Applications]
  · Tightening torque and basic shape of torque wrench.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	203.97 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tête de cliquet QH

  TOHNICHI MFG

  [Features]
  · The QH-type ratchet head has a small tightening amplitude and can be easily used in confined spaces.
  [Applications]
  · Replacement heads selectable according to work conditions or environments.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	91.33 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique numérique CTB2/CTB2-G

  TOHNICHI MFG

  [Features]
  · A torque wrench for the re-tightening inspection of tightened screws.
  · Uses the Tohnichi original new additional tightening torque measurement algorithm "T-point method". (*PAT.PEND)
  · The additional tightening torque can be measured without individual variability.
  · 999 internal memory data events, output with RS232C.
  · Head exchangeable type enables use of wrenches, ring wrenches, etc. to suit various purposes.
  · Can be securely used in the EU region as well.
  · ISO 6789 Type I Class C calibration procedure compliant.
  [Applications]
  · For additional tightening inspection.
  

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2,845.09 €
  Délai d'expédition minimum ：	13 jours

  *Prix unitaire/configuration de base

• 

  902Md Clé à  fourche pour clé dynamométrique

  AMF

  Clé à  fourche pour clé dynamométrique pour écrous 6 pans. Carré 1/2 avec rainure pour verrouillage par bille. Acier spécial traité et zingué. Ce produit est disponible par 1 pièce.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	68.75 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• 

  Couplemètre numérique pratique

  MAEDAKINNZOKU

  Digital torque measuring device.
  [Features]
  · Can be mounted between manual handles and sockets for use.
  · When the set torque is reached, it will be announced by a buzzer sound, red LED light and LCD.
  · Comes with a calibration certificate.
  · Can be switched between two measurement modes (peak mode / track mode). Supports both clockwise and counterclockwise rotation.
  · Equipped with a function to prevent overtorque by notifying the user with a sound of the buzzer (intermittent) when target torque is almost achieved.
  · The buzzer can be set to start in a range between 50 and 95% of target torque.
  [Applications]
  · Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	110.71 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique avec graduation / Version de base

  TOHNICHI MFG

  [Features]
  · Worker fatigue decreases due to having fewer irregular shapes compared to plates.
  · Dial scale can be rotated, so the indicator can be set to the configured torque and completed with "0".
  [Applications]
  · For inspection and tightening.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	232.05 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique plate

  TOHNICHI MFG

  [Features]
  · Left and right torque are engraved on the scale, which can be used for additional tightening and checking loosening torque.
  [Applications]
  · For inspection and tightening.

  • Remise sur volume

  • Stock

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	125.42 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique en forme de clé à fourche simple

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening flare nuts.
  [Features]
  · Standard tightening torque is set in advance for the new refrigerant's flare pipe coupling and flare nut.
  * The torque value setting cannot be changed.
  · When it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  [Applications]
  · For tightening flare tube fittings and flare nuts on room air-conditioners, cooling machines, etc.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	82.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Testeur de clé dynamométrique

  TOHNICHI MFG

  Can be operated easily to enable quick checks that greatly reduce measurement time. The Pass/Fail judgment function shows the check result at a glance. A torque wrench check for line sides and on-site.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	1,831.18 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Couple ATG/BTG

  TOHNICHI MFG

  Un appareil de mesure de couple pratique pour mesurer le couple minute
  

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	402.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon monofonction, type N-SPK

  NAKAMURA MFG

  [Features]
  · Click. Safety work with a beep indicating the completion of tightening. Wrench type suitable for assembly-line work.
  · A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
  · Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
  · Can be used effectively in narrow spaces, such as the gaps in machinery.
  · While it activates only when fastened in arrow direction, it can be used for left screws by flipping over.
  · The accuracy is guaranteed up to ±3%.
  · H types with grips are also available.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	8 jours

• 

  Clé dynamométrique Tohnichi, type CL

  TOHNICHI MFG

  [Features]
  · A cost-saving torque wrench that can exchange heads according to the application, including wrenches, ring wrenches, ratchets, and hex heads, all with a single torque wrench.
  · Torque adjustment is easy and reliable.
  · A small torque wrench with easily visible large scale.
  · A new locking mechanism to prevent human error such as torque setting errors has been developed.
  [Applications]
  · For assembly and mass production.
  [Product Specifications]
  · Torque Adjustment Range (N·m): 0.4 - 2
  · Overall length (mm): 173
  · Minimum scale (N·m): 0.02
  · Torque Precision ±3%
  · Load Direction: Right (head can be reversely mounted for reverse thread torque management)
  · JAN code: 4571141278734
  · Trusco code: 821-9167
  · Mass: 0.24 kg

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	182.29 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique préréglée

  TOHNICHI MFG

  [Caractéristiques]
  · Clé dynamométrique économique qui prend en charge le changement de têtes en fonction de l'application prévue, telle que clé à vis, clé à vis à anneau, clé à cliquet, tête hexagonale, etc. dans une simple clé à vis.
  Lorsque le couple défini est atteint, la bascule s'active et un signal sonore clair et un voyant informent l’utilisateur de l'achèvement du serrage.
  [Applications]
  Pour le serrage de diverses vis utilisées pour les applications d’assemblage et de production en masse.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	139.81 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon isolée, monofonction, type N-QSPK-CE

  NAKAMURA MFG

  [Features]
  · A special dual-layer design for the insulating material prevents accidents with electric shock.
  · A special dual-layer coating of insulating material protects the operator from electric shock.
  · Since the upper and lower layers of the dual-layer coating of insulating material have been color-coded, it is easy to see at a glance the extent of damage to the coating.
  · The withstand voltage is within 1,000 VAC.
  · Ideal for servicing, maintenance, and inspection of electric cars.
  · The insulated coating socket is also a custom order product.
  · The accuracy is guaranteed up to ±3%.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	227.96 €
  Délai d'expédition minimum ：	45 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique Kanon à verrouillage, paramétrable, type N-KQLK

  NAKAMURA MFG

  [Features]
  · The torque adjusting ring is secured using a dedicated tool. Torque value cannot be changed while working.
  · The torque value cannot be changed without a dedicated tool.
  · There are no torque value fluctuations during tightening work.
  · A ratchet type that enhances work efficiency and is suitable for repetitive work.
  · The accuracy is guaranteed up to ±3%.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	239.17 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Jauge de couple Kanon, type N-SGK, avec indicateur

  NAKAMURA MFG

  [Features]
  · A 3-way chuck which can hold anything. Provides a highly accurate torque value.
  · Small, lightweight, and convenient to carry.
  · The tip is a three-jaw chuck (made of metal). Securely holds either round or square objects.
  · Knurling allows easy gripping.
  · The stepped scale face structure helps prevent scratches.
  · Measurement is possible in either direction, left or right.
  · The N-SGK torque gauge includes scales on both the front and side surfaces, with the same results in both locations.
  · The accuracy is guaranteed up to ±3%.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	398.93 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique type signal CL / CLE2

  TOHNICHI MFG

  [Features]
  · Head exchangeable type.
  · A cost-saving torque wrench that can exchange heads according to the application, including wrenches, ring wrenches, ratchets, and hex heads, all with a single torque wrench.
  · When the set torque is reached, the toggle operates, and a light, clear signal sound lets the user know when tightening is complete.
  · The torque can be changed easily using the scale.
  · Can be securely used in the EU region as well. ISO 6789 Type II Class A calibration procedure compliant.
  [Applications]
  · For tightening various screws for assembly and mass production.
  

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	177.70 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Levier

  GEDORE

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	312.32 €
  Délai d'expédition minimum ：	11 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique

  GEDORE

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	191.76 €
  Délai d'expédition minimum ：	3 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique

  IFM

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	736.46 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (paramétrage direct / constant)

  MAEDAKINNZOKU

  Tip socket is a holding type that prevents bits from falling out, as a torque wrench that dramatically decreases mistakes.
  [Features]
  · Equipped with a hold mechanism that prevents the socket from falling off and provides excellent operability.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  [Applications]
  · For assembly, maintenance and inspection at locations in high places where torque control is required.
  · Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
  · Ideal for various torque management tightening work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	253.33 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (définition en mémoire)

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening bolts and nuts.
  [Features]
  · A digital type with easy-to-see numerical display that drastically reduces errors in torque setting.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or light "shock" to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  · Torque can be set by inserting a hex L-shape wrench into a configuration thread component in the rear of the wrench.
  [Applications]
  · Ideal for assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.
  · Can be used for work ranging from assembly at industrial plants to maintenance of large trucks, automobiles, general industrial equipment and plants.
  · Ideal for various torque management tightening work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	219.44 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Clé de puissance

  MAEDAKINNZOKU

  Manual torque wrench with booster mechanism ideal for tightening/loosening hexagonal bolts/nuts.
  [Features]
  · Manual type so a power supply or air supply is not necessary. Protects the working environment as it doesn't generate noise or impact sounds.
  · Capable of outputting approximately 3 times more power with low input torque thanks to its planetary gear mechanism.
  · The power wrench does not allow input greater than maximum input torque.
  [Applications]
  · Assembly of machinery, foundation bolting, large chucking, die set installation.
  · Maintenance, installation of temporary frames, as well as assembly and repair of steel tower foundation bolts.
  · For attachment/detachment of wheel nuts of large vehicles, large bolts of construction machines and heavy machinery, and engine bolts of ships.
  · Assembly repair of piping valves, flanges, and heat exchangers at various plants.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	677.89 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à molette (paramétrage direct)

  MAEDAKINNZOKU

  Specialized monkey-type clamping torque wrench which does not damage the corners of bolts or nuts.
  [Features]
  · The lower jaw of the monkey wrench head part is better secured, and has a backlash-less worm function.
  · Digital-type torque setting for easy identification of displayed value.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or sensation to the hand.
  · Can be adjusted to any required sizes, metric or inch, or to square or irregular shapes of nuts and bolts.
  [Applications]
  · For piping of air conditioners, etc. and torque tightening for automobiles and motorcycles.
  · For optical fiber connector/exchanger mounting in communication facilities, as well as for anchor bolts on evacuation equipment in disaster prevention facilities, etc.
  · Wide type ideal for tightening non-ferrous/plastic nuts, etc. at low torque.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	339.89 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à prédéfinition (paramétrage direct)

  MAEDAKINNZOKU

  Dedicated torque wrench for tightening bolts and nuts.
  [Features]
  · Digital-type torque setting for easy identification of displayed value.
  · In tightening work, when it reaches the set torque value, there will be a "clicking" sound or a sensation to the hand.
  · Unlike conventional types, there is no need to read the main scale and Vernier scale, so it is convenient for preventing setting errors and confirmation/management of tightening torque.
  · Torque is set based on digitally displayed value of mechanical mechanisms which can be read directly.
  [Applications]
  · For assembly, maintenance, and inspection of places requiring torque setting, such as for ports, electrical facilities, automobiles, heavy machinery, aircraft, etc.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	187.83 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Boulonneuse usage intensif

  MAEDAKINNZOKU

  Manual wrench with a boost mechanism suitable for tightening/loosening large bolts and nuts.
  [Features]
  · Manual type so a power supply or air supply is not necessary.
  · Exhibits significant power with low input torque thanks to its planetary gear mechanism.
  · Protects the working environment as it doesn't generate noise or impact sounds.
  [Applications]
  · Ideal for assembly of machinery, foundation bolting, and large chucking.
  · Convenient for mounting die sets, maintenance, mounting centering and foundation bolts for steel towers.
  · Ideal for attachment/detachment of wheel nuts of large vehicles, large bolts of construction machines and heavy machinery, and engine bolts of ships.
  · Convenient for assembly repair of piping valves, flanges, and heat exchangers at various plants.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8,951.33 €
  Délai d'expédition minimum ：	56 jours

  *Prix unitaire/configuration de base

• 

  Cliquet digital (numérique)

  MAEDAKINNZOKU

  Easy-to-use ratchet type digital torque wrench.
  [Features]
  · Digital torque display allows anyone to manage torque with ease without relying on their intuition.
  · When the set torque is reached, it will be announced by an LED light, buzzer sound and LCD.
  · Comes with a calibration certificate.
  · The measured torque value can be transferred to a PC.
  · Data storage: Up to 250 entries.
  [Applications]
  · Various manufacturing industries such as industrial machinery, analytical instruments, automobiles. etc., and inspection.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	369.37 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Super clé dynamométrique

  SUPER TOOL

  [Features]
  · The flare nut for use with new refrigerants is tightened at a suitable torque value. The tightening torque setting supports new refrigerants.
  · Tightening is complete at the point when a "click" sound is made at the set torque

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	86.59 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Ensemble de super clés dynamométriques

  SUPER TOOL

  The flare nut for use with new refrigerants is tightened at a suitable torque value.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	120.44 €
  Délai d'expédition minimum ：	11 jours

  *Prix unitaire/configuration de base

• 

  Clé dynamométrique à cadran (avec aiguille)

  TOHNICHI MFG

  [Features]
  · Worker fatigue decreases due to having fewer irregular shapes compared to plates.
  · Dial scale can be rotated, so the indicator can be set to the configured torque and completed with "0".
  · Analog version is convenient for reading the maximum value.
  [Applications]
  · For inspection and tightening.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	253.56 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tête ouverte SH

  TOHNICHI MFG

  [Features]
  · The SH-type wrench head is ideal for screws with which sockets cannot be used, for flare nuts used for piping, and for working in confined spaces.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	31.48 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tête réglable AH2

  TOHNICHI MFG

  [Features]
  · A bundle containing many interchangeable heads. The cost reduction is evident.
  · Resolves at one stroke the torque management for a wide variety of width across flat dimensions.
  [Applications]
  · For tightening nuts for piping of hydraulic and pneumatic devices and air conditioners.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	144.80 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tête hexagonale, type HH

  TOHNICHI MFG

  [Features]
  · HH-type hex head is a head for hex socket bolts. Can insert hex wrench.
  · Replacement bits can be inserted in HH8D only (root part is 6.35 hex).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	70.76 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tête anneau, type RH

  TOHNICHI MFG

  [Features]
  · Because the bolt on the RH-type ring head is at a constant distance from the head center shaft, accurate tightening is possible.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	36.79 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Couplemètre

  TOHNICHI MFG

  [Features]
  · The clamp is a slide type that moves four poles, allowing it to firmly fix objects of any shape.
  · RS232C output is equipped as standard.
  [Applications]
  · Opening the cap, operating, torque test, strength test etc.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	2,427.89 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Couple de moto

  TOHNICHI MFG

  [Features]
  · Can also be used as a torque wrench by mounting commercially available tools.
  · Capable of tightening an extensive range, from 10 to 70 N·m.
  · Tire tightening is also possible by setting a wheel wrench.
  [Applications]
  · Motorcycles, general-use.
  · For field work.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	260.58 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Digirache [Memorque] Module hôte sans fil (pour communications sans fil)

  KTC(KYOTO TOOL)

  [Features]
  · A single host module allows up to 10 units to be connected.
  · To be used in conjunction with Digital Ratchet® [MEMORQUE][TM] (for wireless).

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	182.08 €
  Délai d'expédition minimum ：	14 jours

  *Prix unitaire/configuration de base

• 

  Tête de cliquet

  KTC(KYOTO TOOL)

  [Features]
  · Spare head for Digiratche.
  [Applications]
  · Replacement Head for GEK series.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	58.54 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Douilles pour tête à cliquet, clé polygonale à cliquet

  KTC(KYOTO TOOL)

  [Features]
  · By using in combination with a 14 mm ratchet offset wrench, both the outer diameter and height will be compact, allowing effective use in a small space.
  · Since the socket has a through hole, it can also be used for long protruding bolts.
  [Applications]
  · General purpose tool

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Adaptateur de goupille de tournevis pour tête à cliquet, clé polygonale à cliquet

  KTC(KYOTO TOOL)

  [Features]
  · By using in combination with a 14 mm ratchet offset wrench, both the outer diameter and height will be compact, allowing effective use in a small space.
  · Employs a union mechanism, and the socket can be held securely.
  [Applications]
  · General purpose tool

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.67 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Ensemble tête à cliquet - clé polygonale à cliquet

  KTC(KYOTO TOOL)

  [Features]
  · Ratchet offset headset.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	111.92 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

Loading...