GANTER Charnières

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Charnières / abaissement conique / -90°, 180° / matériau au choix / revêtement au choix / GANTER

  GANTER

  GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	6.20 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / à abaissement conique / asymétriques / matériau au choix / revêtement au choix / GN 237 / GANTER

  GANTER

  Hinges GN 237 with extended hinge wings are made in a compact and sturdy design. They are used when larger spacings are required for the attachment bore holes.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	7.78 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières articulées / à trou oblong / 7 axes / roulées / acier inox / poli mat / GN 1362 / GANTER

  GANTER

  Stainless Steel-Multiple-joint hinges GN 7237 are installed on the inside of flaps, hatches and doors to save space and ensure protection against vandalism. The hinges have a maximum opening angle of 180°, which provides optimal accessibility and avoids the blocking of escape routes by open doors, for example.
  
  Use of this hinge type leaves housing exteriors free of attachments that do not match the design or that should be avoided entirely in the interests of fast and easy cleaning.
  Stainless Steel-Multiple-joint hinges are generally used in pairs, meaning that one type L and one type R are used per opening. For higher loads, e.g. from large hatches, these can be supplemented with additional hinges of either type.

  • Remise sur volume

  à partir de∗ ：	109.78 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnière charge lourde en acier inoxydable pour charges lourdes, étirées horizontalement

  GANTER

  • Remise sur volume

  à partir de∗ ：	27.88 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / à trous oblongs / acier inoxydable / GN 7237 / GANTER

  GANTER

  Stainless Steel-Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.

  • Remise sur volume

  à partir de∗ ：	17.36 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières amovibles / lamelles coniques / zinc / GN 337 / GANTER

  GANTER

  Hinges detachable, Zinc die casting

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	10.32 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / réductions coniques / acier inoxydable / GN 237 / GANTER

  GANTER

  GN 237 hinges are characterized by their compact and stable design. The various material and surface choices in combination with two mounting types enable very specific applications.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	12.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières zinc moulé sous pression / aluminium

  GANTER

  • Remise sur volume

  à partir de∗ ：	12.78 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières / à trous oblongs / asymétriques / zinc moulé / GN 161 / GANTER

  GANTER

  Hinges GN 161 have been designed for commercially available profile rails.
  With three different types of hinges only, 66 different groove distances „n“ can be accommodated. To achieve this the positioning elements are set in specially marked recesses in the hinge wings.
  The rectangular (8x10 mm) positioning elements, two pieces per hinge wing, will prevent a misalignment. They will also carry the weight of the door.
  For screwing the hinges onto the profile rails, special T-Nuts are used.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	15.80 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières amovibles / lamage conique / -90°, 180° / acier inoxydable / GN 337 / GANTER

  GANTER

  Stainless Steel-Hinges detachable

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.20 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières / asymétriques / roulées / acier inoxydable / nu / GN 1364 / GANTER

  GANTER

  Pointed Stainless Steel-Sheet metal hinges GN 1364 are characterized by their compact and universal dimensioning as well as their attractively shaped design. The materials used also permit applications in aggressive environments.Type B is fastened via the existing through-holes using screws or rivets.

  • Remise sur volume

  à partir de∗ ：	9.50 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / asymétriques / roulées / acier inoxydable / nu, zingué, passivé bleu / GN 136 / GANTER

  GANTER

  GN 136 Stainless Steel-Sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.Type A can be fixed in place by welding or by using holes made by the customer.

  • Remise sur volume

  à partir de∗ ：	3.18 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières / non perforées / soudables / roulées / acier / nu / GN 1366 / GANTER

  GANTER

  Hinges GN 1366 are made of rolled or drawn steel profiles and are very robust.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.

  • Remise sur volume

  à partir de∗ ：	12.10 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières de porte avec interrupteur de sécurité / filetage intérieur / acier inoxydable / GN 139.5, type CK / GANTER

  GANTER

  Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof. Hinges GN 139.6 without switching function act as additional hinges, e.g. for larger doors or gates where several hinges are required.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	690.86 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières d'angle / Fiches à cylindre / acier / GN 129.3 / GANTER

  GANTER

  Hinges GN 129.3 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  By using cylinder screws DIN 912, they are conveniently fixed using threads on the user side or by using through screws for different clamping thicknesses.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	24.52 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières / filetage intérieur / asymétrique / zinc moulé / GN 138 / GANTER

  GANTER

  With their attractive design, hinges GN 138 are suitable for use in plant and machinery where a well-designed and stylish appearance is important.
  The concealed and tamper-proof mounting from the rear highlights and enhances the special appearance of the hinge.
  The dimensions l1 / l2 and the drill hole spacings m1 / m2 match the usual hinges GN 237 / GN 237.1 and can replace these.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.04 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières à couple / réductions coniques / zinc moulé / GN 437 / GANTER

  GANTER

  The setscrew in the hinges GN 437 allows the mobility of the hinge to be changed. This also generates a constant braking torque adjustable across the whole of the rotating range. The rotation of doors and flaps is so inhibited, also preventing the inadvertent movement.
  The friction torque is accomplished by interlocking two slim friction cones. The large friction surface and the hard-wearing plastic of the friction cones guarantee a long service life with virtually constant stiffness.
  Owing to the structure and the prestress of the friction cones, the hinge has virtually no radial play and no play at all in axial direction.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	10.00 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières d'angle amovible / soudables / laiton anneaux intermédiaires / aluminium / GN 128.2 / GANTER

  GANTER

  Hinges GN 128.2 are produced from drawn weldable profiled Aluminuim extrusions.
  The pin is fixed in the lower half.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.68 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières d'angle amovible / soudables / laiton anneaux intermédiaires / acier / GN 128 / GANTER

  GANTER

  Hinges GN 128 are produced from drawn weldable profiled steel extrusions.
  Types ST, STS and MS feature a hinge pin fixed in the lower half of hinge. Type STL with loose steel pin allows the easy installation when attaching several hinges in parallel or if the door is very heavy.
  The upper half of Type STS hinge has an additional lubricating nipple DIN 71412-D which allows the hinges to be lubricated without dismantling the hinges.
  
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières de porte / filetage intérieur / zinc moulé sous pression / GN 139.2, type AK,CK / GANTER

  GANTER

  Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
  The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	170.88 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières / filetage intérieur / asymétrique / zinc moulé sous pression / GN 139.1 / GANTER

  GANTER

  Hinges GN 139.1 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO).
  The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable (see contact travel diagram).
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	172.86 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières de porte avec interrupteur de sécurité / filetage intérieur / acier inoxydable / GN 139.5, type A,B,C / GANTER

  GANTER

  Hinges GN 139.5 with integrated safety switches have been designed for monitoring doors and covers of machines and plants. Opening the door will activate the switch contacts which, in turn, will then e.g. interrupt a protective circuit via break contact (NC) and at the same time signal the door opening by closing a normally open contact element (NO). The contact blocks are fitted with positive opening slow-action contacts, i.e. they will definitely be separated when activated and have no hysteresis. The angle at which the switching points are reached are adjustable.
  Together with the integrated contact blocks, the hinges are a compact, easy to mount unit with an attractive design. The mounting from the back make the hinge more tamper-proof.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	697.36 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières / réduction conique, élément de compensation / Inserts d'ajustage / Inserts d'ajustage / zinc moulé / GN 127 / GANTER

  GANTER

  Hinges GN 127 allow the technically and visually perfect positioning and alignment of a door in its frame.
  The serrations at the wings of the hinge and at the adjusting bushes create a form lock which prevents the hinge from moving after installation. The tips of the arrows mark the 0 reference point for easier installation.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.66 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / réduction conique / zinc moulé sous pression / GN 238 / GANTER

  GANTER

  The adjustable hinges GN 238 allow the technically and visually perfect positioning and alignment of a door in its frame.
  The steel adjusting disc has a cutting ring in its underside which cuts into the radial fins of the zinc die-cast wings when the countersunk screw is tightened, virtually creating a form-lock that prevents adjusting the hinge after mounting.
  The covers conceal the fixing elements and lend the hinge an attractive optical appearance.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.26 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières d'angle / bonlon / acier / GN 129.2 / GANTER

  GANTER

  Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.66 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières d'angle / bonlon / acier / GN 129 / GANTER

  GANTER

  Hinges GN 129 are used for doors which are flush with the frame on the outside. The hinges are normally arranged to the side of the door.
  In the two-part design, the door can be unhinged with two identically arranged hinges.
  The three-part hinges, which generally cannot be unhinged and are mounted inside, are suitable for doors and flaps which, as anti-tamper precaution, must not be dismountable from the outside.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.20 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières de porte / filetage intérieur / zinc moulé sous pression / GN 139.2 / GANTER

  GANTER

  With the exception of the connector plug, hinges without safety switch GN 139.2 do not differ in their external appearance from hinges with safety switch GN 139.1. With the concealed screw connection at the back, the hinge is also tamper-proof.
  The compact design combines safety and attractive appearance.
  The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	43.20 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières d'angle amovible / filetage intérieur / zinc / GN 161.1 / GANTER

  GANTER

  Hinges GN 161.1 are a variant with highly attractive design. The fixing screws are invisible.
  During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force.
  For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition.
  The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.
  

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	10.20 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières d'angle amovible / filetage intérieur / zinc / GN 161.2 / GANTER

  GANTER

  Hinges GN 161.2 are a variant with highly attractive design. The fixing screws are invisible.
  During the load tests, the hinges were gradually loaded and relieved at room temperature with incrementally increasing force. For the specified values, an insignificant permanent deformation remained after relieving the load which had no effect on the function and appearance. In most cases, the failure loads are multiples of the specified value.
  The details relating to the load bearing capacity are non-binding recommended values and rule out any liability. They constitute no general warranty of quality and condition. The user must determine from case to case whether a product is suitable for the intended use. Environmental influences and aging may influence these values.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.40 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Embases de charnières / Equerre / zinc moulé / 139.4-101 / GANTER

  GANTER

  The angled mounting plate GN 139.4 allows the hinges GN 139.1 / GN 139.2 to be attached between frame and door, i.e. the door gap.
  The long slotted holes allow the attachment to profile
  systems.
  Countersunk screws for fixing the hinges to the mounting plate are
  included part of the order.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	26.52 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Embases de charnières / trous oblongs / acier / Galvanisé / 139.3-170 / GANTER

  GANTER

  The flat mounting plate GN 139.3 allows the hinges GN 139.1 / GN 139.2 to be attached from the front.
  The long slotted holes allow the attachment to profile
  s ystems.
  Countersunk screws for fixing the hinges to the mounting plate are
  included part of the order.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	38.10 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / lamelles coniques / roulées / acier / zingué, passivé bleu / GN 136 / GANTER

  GANTER

  Sheet metal hinges GN 136 are low-cost designs for low-load applications.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.16 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Charnières de porte / filetage intérieur / acier inoxydable / 139.6-76-126 / GANTER

  GANTER

  With the exception of the connector plug, the hinge without safety switch GN 139.6 do not differ in their external appearance from hinges with safety switch GN 139.5. With the concealed screw connection at the back, the hinge is also tamper-proof.
  The compact design combines safety and attractive appearance.
  The design with broad hinge halves is intended for mounting to glass or polycarbonate doors.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	530.48 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières d'angle / bonlon / acier inoxydable / GN 129.2 / GANTER

  GANTER

  Stainless Steel-Hinges GN 129.2 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	33.36 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières d'angle / bonlon / acier inoxydable / GN 129.5 / GANTER

  GANTER

  Stainless Steel-Hinges GN 129.5 are used for doors which are flush with the frame on the outside. Once assembled, they cannot be unhinged.
  With the fixing from the inside, they are especially suitable for doors and trap doors which must not be detachable from the outside as an anti-tamper device.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	28.12 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières d'angle amovible / soudables / laiton anneaux intermédiaires / acier inoxydable / GN 128.2 / GANTER

  GANTER

  Hinges GN 128.2 are produced from drawn weldable profiled Stainless Steel extrusions.
  The pin is fixed in the lower half.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	16.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / non percées / roulées / acier inoxydable / brillant / GN 136 / GANTER

  GANTER

  Stainless Steel-Sheet metal hinges GN 136 are low-cost designs for low-load applications.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	2.98 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / non percées / soudables / roulées / acier inoxydable / nu / GN 1362 / GANTER

  GANTER

  Stainless Steel-Sheet metal hinges GN 1362 are distinguished by their universally compatible dimensions. The materials used also permit applications in aggressive environments.Type A is fastened via welding or holes created by the customer.Thanks to the standard dimensions, special application-specific solutions can be realized even in relatively small quantities.

  • Remise sur volume

  à partir de∗ ：	5.32 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / asymétriques / roulées / acier / zingué, passivé bleu / GN 235 / GANTER

  GANTER

  GN 136 sheet metal hinges are available in many different versions and are suitable for light to medium-duty applications.

  • Remise sur volume

  à partir de∗ ：	2.38 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Charnières / à trous oblongs / zinc moulé sous pression / GN 1366 / GANTER

  GANTER

  Hinges GN 235 are adjustable in height or width along the slots, depending on the design, and are fastened with hex-head, oval-head or cylinder screws with a low head.Thanks to sufficient space (installation space) available for screw heads and washers, the hinges can be opened by 180° without collision.The hinge drill pattern corresponds with that of the GN 237 hinge family, which allows the hinges to be exchangeable.

  • Remise sur volume

  à partir de∗ ：	12.36 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Plaques inox avec goujons filetés, charnières GN GN GN

  GANTER

  • Remise sur volume

  à partir de∗ ：	12.00 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Plaques inox avec trous taraudés, charnières GN GN GN

  GANTER

  • Remise sur volume

  à partir de∗ ：	9.66 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières pour profilés en aluminium / éléments de surface, en trois parties

  GANTER

  • Remise sur volume

  à partir de∗ ：	30.26 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières articulées en acier inoxydable (GN 7237)

  GANTER

  • Remise sur volume

  à partir de∗ ：	110.76 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Charnières réglables en zinc moulé sous pression

  GANTER

  • Remise sur volume

  à partir de∗ ：	18.10 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

Loading...