HOZAN Tournevis
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
- En promotion
Alésoir conique K-441 / K-442 / K-443 / K-444
HOZAN
A taper reamer that boasts outstanding sharpness and durability.
[Features]
· K-441, K-442, K-443 and K-444 are available.
· Can be used in various applications according to the hole diameters and taper angles.
· Perfect for work that requires application of torque as it comes with a handle.
· Allows cutting by rotating clockwise.
· Excellent sharpness and outstanding durability.
[Applications]
· Ideal for modification and enlargement of holes in metal plates, aluminum plates, thin iron plates, etc.- Remise sur volume
à partir de∗ ： 13.68 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Broche étau K-501
HOZAN
Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.
[Features]
· Features a rotary head with embedded ball bearings, which offers great workability.
· Vise for small diameter drills with rotating cap.
· It can be smoothly rotated while pushing in the vertical direction.
· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.
· It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.
· The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.
[Applications]
· It can also be used for etching by grasping a needle (probe), etc.- Remise sur volume
à partir de∗ ： 27.53 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Tournevis à impact D-963
HOZAN
Impact screwdriver that can be switched between left and right rotation.
[Features]
· Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
· It uses a flanged protective grip that protects the hand.
· Removing the bit holder allows a 12.7 mm square socket to be attached.
· Case included.
[Applications]
· Ideal for turning screws, etc. that take effort to loosen.- Remise sur volume
à partir de∗ ： 4.73 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Tournevis réglable, céramique interchangeable D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).- Remise sur volume
à partir de∗ ： 69.44 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Broche étau K-502
HOZAN
Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.
[Features]
· As the main body is compact, it is easy to see the work at hand.
· Also, there is less load in continuous work as it is a light finish.
· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.
[Applications]
· It can also be used for drilling on precision parts and substrates, for plastic models, for etching by grasping a needle (probe), etc.
· A fixed-type collet, body-integral, compact single-head type.- Remise sur volume
à partir de∗ ： 12.01 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Jeu de tournevis de réglage en céramique D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Remise sur volume
à partir de∗ ： 64.90 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Tournevis de précision, lot de 6【6 pièces par conditionnement】
HOZAN
High-precision screwdriver set with high versatility.
[Features]
· A set of +No.0/+No.1/-1.2 x 0.32/-1.8 x 0.32/-2.3 x 0.35/-3.0 x 0.45.
· Sewn case included.
[Applications]
· Ideal for fast turning of small screws thanks to its rotary-type head that provides high workability.à partir de∗ ： 24.23 € Délai d'expédition minimum ： 8 jours *Prix unitaire/configuration de base
-
Tournevis d'électricien avec DEL, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Remise sur volume
à partir de∗ ： 14.71 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
| |
| Marque | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Série du produit | Tournevis de précision, lot de 6【6 pièces par conditionnement】 | |||||||
| à partir de∗ | 13.68 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 27.53 € *Prix unitaire/configuration de base Remise sur volume | 4.73 € *Prix unitaire/configuration de base Remise sur volume | 69.44 € *Prix unitaire/configuration de base Remise sur volume | 12.01 € *Prix unitaire/configuration de base Remise sur volume | 64.90 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 24.23 € *Prix unitaire/configuration de base | 14.71 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | Jour même | 8 jours | 7 jours | 7 jours | 7 jours | Jour même | 8 jours | 7 jours |
| Tip standards | Autre | - | Phillips (+) / Tête plate (-) / Phillips (+) / tête plate (-) | Tête plate (-) | - | Phillips (+) / tête plate (-) | Phillips (+) / tête plate (-) | Tête plate (-) |
| Tip size / Phillips (+) | - | - | N° 2 / N° 3 / N° 4 | - | - | N° 0 | N° 0 / N° 1 | - |
| Tip size / flathead (-) blade width (mm) B1 | - | - | 8 ～ 10 | 0.9 ～ 2.6 | - | 1.3 ～ 1.8 | 1.2 ～ 3 | 2.5 |
| Shaft length L (mm) | - | - | 36 ～ 80 | - | - | 110 | - | 17 |
| Single Product/Set Classification | Unité | Unité | Unité / Produit du jeu | Produit du jeu | Unité | Produit du jeu | Produit du jeu | Unité |
| Shaft type | - | - | Carré | Rond | - | Rond | Rond | Rond |
| Magnet | - | - | N/A | N/A | - | N/A | N/A | N/A |
| Shaft through | - | - | - | - | - | N/A | N/A | N/A |
| Bolster | - | - | - | - | - | N/A | N/A | N/A |
| Grip Type | Acier inoxydable | - | Caoutchouc | Résine | - | Résine | Acier inoxydable | Résine |
| Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | 0.4 | - | 0.4 | 0.32 ～ 0.45 | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Tip standards
- Phillips (+)
- Tête plate (-)
- Phillips (+) / tête plate (-)
- Torx
- Boîte
- Hexagone
- Bille
- Combinaison
- Autre
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
-
Shaft type
-
Magnet
- Disponible
- N/A
-
Shaft through
- Disponible
- N/A
-
Bolster
- Inclus
- N/A
-
Grip Type
- Résine
- Poignée en bois
- Caoutchouc
- Acier inoxydable
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Affiner la recherche en spécifiant le fabricant
-
- WIHA (186)
- VESSEL (39)
- PB SWISS TOOLS (37)
- MAEDAKINNZOKU (34)
- ANEX (29)
- WERA (25)
- TRUSCO NAKAYAMA (24)
- KTC(KYOTO TOOL) (19)
- ENGINEER (15)
- PHOENIX CONTACT (10)
- SK 11 (9)
- HOZAN (8)
- GEDORE (7)
- BAHCO (6)
- SUNFLAG (5)
- BERNSTEIN AG (4)
- KNIPEX (4)
- HAZET (3)
- HIRAI KOGU (3)
- TRAD (3)
- WOLFCRAFT (2)
- EIGHT TOOL (2)
- E VALUE (2)
- SMATO (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- AS ONE (1)
- HANDIWORK (1)
- MATADOR (1)
- OSG (1)
- PROXXON (1)
- RITTAL (1)
- WEIDMUELLER (1)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Catégories relatives à « Tournevis »
-
- Clés / clés polygonales /clés à cliquet
- Clés à six pans
- Clés anglaises
- Clés Torx
- Clés à douille
- Tournevis
- Pinces/tenailles
- Ensembles d'outils / boîtes à outils
- Embouts de tournevis
- Brucelles
- Outils d'entretien automobile
- Outils de plomberie et de climatisation
- Outils pour la tôle
- Outils destinés aux installations électriques
-
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.