NABEYA Pieds de réglage

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Niveleur, modèle FPS

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	8.86 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cric de mise à niveau

  NABEYA

  A leveling jack with a large adjustment stroke and outstanding strength.
  
  [Features]
  · The adjustment stroke is large and can be used where ground subsidence is extreme.
  · Can be fixed with an anchor bolt.
  · An FCD550 ductile base is used and has outstanding strength.
  · A spherical receiver head that makes precise adjustments smooth.
  · Displacement value in relation to load is small (0.03 at 50kN)

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	212.90 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Cric à pied de type FJB (type à base en caoutchouc)

  NABEYA

  A rubber base foot jack. Features a slipping prevention effect and light vibration-proofing properties.
  
  [Features]
  · A Phillips head slot has been provided on the bottom of the base and assembly can be done quickly with an impact wrench, etc.
  · A nylon washer is built in to the base upper surface enabling operations to be performed smoothly.
  · The bottom part rubber features liquid resistance (gasoline, kerosene, acids, alkaline substances) and can be used from -20°C to 120°C.
  · The bottom part rubber features a slipping prevention effect, cushioning properties, and light vibration-proofing properties.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.46 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Cric de nivellement

  NABEYA

  A level jack that can be used for various applications.
  
  [Features]
  · The main body is durable thanks to the use of FC250 tough cast iron.
  · Operation load is 2TON

  Fichiers CAD 2D disponibles

  à partir de∗ ：	90.02 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FPK

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Cale en coin

  NABEYA

  Capable of 0.1 mm leveling for heavy workpieces.
  
  [Features]
  · Capable of accurately adjusting the height without shifting horizontally.
  · Capable of 0.1 mm leveling even for heavy workpieces.
  · Includes a center hole (ø12)

  Fichiers CAD 2D disponibles

  à partir de∗ ：	969.03 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Cric antivibrations à pédale de commande

  NABEYA

  A vibration-proof foot jack that in which a high performance foamed polyurethane pad is used. Higher performance than rubber pads.
  
  [Features]
  · A foot jack with a leveling mechanism and vibration-proofing function.
  · Higher performance than rubber pad products.
  · Features superior solution resistance and will not transfer onto floors.
  · Since the bolt connection is flexible, it can absorb the sloping of the floor.
  · Three types of pads are available to satisfy conditions for vibration frequency, machine type, and weight.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.17 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Goujon, pied de nivellement

  NABEYA

  Ideal for the leveling of equipment, etc. Three types are available: S45C, resin pad, and SUS.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	22.08 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAJK

  NABEYA

  [Features]
  · A semi-order type in which bolt diameter, bolt length, and pad diameter are selected and combined.
  · Can be fixed using an anchor bolt.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	31.10 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coins de fixation anti-vibrations (modèle D)

  NABEYA

  [Features]
  · A vibration-proof wedge mount that features a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	238.96 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FPJK

  NABEYA

  [Features]
  · A semi-order type in which bolt diameter, bolt length, and pad diameter are selected and combined.
  · Can be fixed using an anchor bolt

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.52 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Pied de nivellement

  NABEYA

  Ideal for the leveling of equipment, etc. Three types are available: S45C, resin pad, and SUS.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	19.58 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FJK (monté)

  NABEYA

  Can be fixed with an anchor bolt.
  
  [Features]
  · A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
  · Can be fixed using an anchor bolt

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	13.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Niveleur, modèle FJV

  NABEYA

  Low priced foot jack
  
  [Features]
  · A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	5.24 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Coin de fixation anti-vibrations PKAK (à boulonner avec sièges sphériques)

  NABEYA

  A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function. Comes with a spherical sheet enabling the slope between the machine and base can be corrected. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	483.13 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAS

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	18.34 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Élément de nivellement BNSHA

  NABEYA

  Suitable for vibration-proofing press machines, automatic stamping machines, die-cast machines, etc., and can be fixed to the floor.
  
  [Features]
  · A fixed type leveling element that features a leveling mechanism and vibration-proof function (BNSHA).
  · The bolt and nut can be selected from the leveling screws BNSB.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	237.74 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Crics de pieds de nivellement

  NABEYA

  A leveling foot jack that can be used together with an anchor bolt. Convenient for adjusting the levels of machine tools.
  
  [Features]
  · Convenient for adjusting the levels of machine tools.
  · Can be used together with an anchor bolt.
  · Ductile casting is used for the base plate and the load resistance is sufficient.
  · The adjustment stroke is large and can be used where ground subsidence is extreme.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	61.02 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Blocs de nivellement, modèle H

  NABEYA

  Ideal for the leveling of large machinery such as large milling machines, turning machines, and boring machines.
  
  [Features]
  · Features good precision.
  · Can be fixed with an anchor bolt.
  · Ideal for large machinery such as large milling machines, turning machines, boring machines, and planer machines.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	144.13 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Coin de fixation anti-vibrations PKDK (à boulonner avec sièges sphériques)

  NABEYA

  A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function. Comes with a spherical sheet enabling the slope between the machine and base can be corrected. Note: The CAD data for this series is being revised. This data will be made available as soon as modifications have been completed.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	482.58 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coins de fixation anti-vibrations (modèle C)

  NABEYA

  A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	238.68 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coins de fixation anti-vibrations (modèle F)

  NABEYA

  A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function.
  
  [Features]
  · Has a high load resistance.
  · A precision leveling wedge mount that features a precise leveling mechanism, a large stroke, and a vibration-proof function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	226.35 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAJ

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	29.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FPJ

  NABEYA

  A semi-order type in which bolt diameter, bolt length, and pad diameter can be selected and combined.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	17.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FJ (modèle standard)

  NABEYA

  The most general foot jack. Can be used for various industrial equipment.
  
  [Features]
  · A hex nut is press-fitted into the base bottom part and the FJ-S type can be quickly assembled with an impact wrench, etc.
  · A Phillips head slot has been provided on the base bottom of the FJ type and assembly can be performed using a screwdriver, etc.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	4.34 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Bloc de nivellement de type AP

  NABEYA

  A leveling block that can also be used sideways or upside down.
  
  [Features]
  · Can also be used sideways or upside down.
  · An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
  · Can also be used for the centering of workpieces when cutting or to prevent chattering.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	142.88 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Blocs de nivellement NU

  NABEYA

  [Features]
  · Compensates for sloped installation surfaces with a spherical receiver plate.
  · The spherical part has undergone precision processing with a contact ratio of 65% or higher.
  · The spherical receiver plate and top plate are made of ductile cast iron that is hard to damage.
  · Lifting amount (adjustment amount) is set to 10 mm, which is the highest in its class.
  · Employs a thrust needle bearing and special washer to enable operation with a load of 100kN.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	405.84 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Bloc de nivellement de type T

  NABEYA

  Includes a horizontal deviation / vertical deviation preventing mechanism.
  
  [Features]
  · The parts are precisely processed to have parallelism, so precise fine adjustments can be made.
  · The overall height is made as low as possible to provide outstanding stability.
  · The product features a horizontal deviation / vertical deviation mechanism and displacement with regards to dynamic loads is minimal.
  · Can also be fixed using an anchor bolt.
  · Ideal for five-face machining devices, large grinding machines, various dedicated machinery, large printing machines, measurement machinery, etc.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	300.05 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Blocs de nivellement modèle en U

  NABEYA

  Compensates for sloped installation surfaces with a spherical receiver plate. Includes a horizontal deviation / vertical deviation preventing mechanism.
  
  [Features]
  · Compensates for sloped installation surfaces with a spherical receiver plate.
  · The spherical part has undergone precision processing having with contact ratio of 70% or higher, enabling alignment to be performed easily. The displacement value in relation to the load is also very small.
  · The product has a horizontal deviation / vertical deviation mechanism, is resistant to dynamic loads, and enables leveling to be performed quickly with a low level of torque.
  · The thickness of each part is thick and can withstand abrupt loads.
  · Can also be fixed using an anchor bolt.
  · Ideal for vertical lathes, grinders, NC machine tools, various special devices, printing machines, etc.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	382.82 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coin de fixation anti-vibrations PKA (modèles à boulonner)

  NABEYA

  A wedge mount that features a vibration-proof function.
  
  [Features]
  · A type for fixing machinery and mounts.
  · A precision leveling wedge mount featuring a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.
  · In particular, it can be used for vibrations caused by machinery, die-cast machines that cause strong shocks, as well as injection molding machines and impact testing machines, etc.
  · Leveling screw for flexible connection (BNVRBF) can be used for the fixing screw.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	360.09 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coin de fixation antivibrations PKD (à boulonner)

  NABEYA

  [Features]
  · A type for fixing machinery and bases.
  · A vibration-proof wedge mount that features a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	359.53 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FAK

  NABEYA

  [Features]
  · A semi-order type in which bolt diameter, bolt length, and pad diameter are selected and combined.
  · Can be fixed using an anchor bolt

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	27.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FJC (modèle charge lourde)

  NABEYA

  A type of casting base that can support heavy loads.
  
  [Features]
  · A Phillips head slot has been provided on the base bottom and assembly can be performed using a screwdriver, etc.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	11.58 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Élément de nivellement BNRS

  NABEYA

  [Features]
  · The flexibility of the bolt connection can absorb the slope of the floor.
  · A leveling element featuring a leveling mechanism and vibration-proof function.
  Three types of elements are available to meet the applicable vibration frequency, machine type, and weight.
  · They are, from the lowest supported frequency to the highest, P30W, P4, and P0.
  · The bolt and nut can be selected from the leveling screws for flexible connection, BNVRBF.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	51.03 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Blocs de nivellement, modèle A

  NABEYA

  The standard leveling block.
  
  [Features]
  · Features good precision.
  · Machinery installation costs are reduced.
  · Features the best rigidity.
  · Installation is easy.
  · Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	126.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Bloc de nivellement, type BW

  NABEYA

  Ideal for the leveling of heavy objects.
  
  [Features]
  · Ductile cast and tough.
  · A thrust roller bearing is used for smooth operation.
  · BW10 is made of tough cast iron FC300 and a thrust roller bearing is not used.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	1,309.81 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Bloc de nivellement de type B

  NABEYA

  A low priced leveling block. Can be used together with an anchor bolt.
  
  [Features]
  · Can also be used sideways or upside down.
  · An attachment can be mounted to the tapped hole on the top surface and for which point contacts can also be adjusted.
  · Can also be used for the centering of workpieces when cutting or to prevent chattering.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	97.07 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Coins de fixation anti-vibrations (modèle A)

  NABEYA

  A wedge mount featuring a precise leveling mechanism, large adjustment stroke, and vibration-proof function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	226.63 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coins de fixation anti-vibrations (modèle B)

  NABEYA

  [Features]
  · A vibration-proof wedge mount that features a precise leveling mechanism, a large adjustment stroke, and a vibration-proof function.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	226.35 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coins de fixation anti-vibrations (modèle E)

  NABEYA

  [Features]
  · Suitable for machinery that does not require vibration-proofing.
  · A wedge mount featuring excellent slip preventing properties, a precise leveling mechanism, and a large adjustment stroke.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	203.34 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Niveleur, modèle FJR (modèle caoutchouc)

  NABEYA

  Since it includes rubber, floors are not damaged and slipping is prevented.
  
  [Features]
  · Since it includes rubber, floors are not damaged and slipping is prevented.
  · A hex nut is press-fitted to the bottom of the base to enable quick assembly with an impact wrench, etc.
  · The rubber has liquid resistance (gasoline, kerosene, acid, alkali) and can be used from -22°C to 100°C.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	9.29 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Élément de nivellement BNRSV (acier inoxydable)

  NABEYA

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	100.56 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Élément de nivellement BNSH

  NABEYA

  A leveling element suitable for the vibration-proofing of press machines, automatic stamping machines, die-cast machines, etc.
  
  [Features]
  · A leveling element that features a leveling mechanism and vibration-proof function (BNSH).
  · A fixed type leveling element that features a leveling mechanism and vibration-proof function (BNSHA).
  · The bolt and nut can be selected from the leveling screws BNSB.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	73.11 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Blocs de nivellement, modèle AN

  NABEYA

  No flange. Can be installed in narrow places.
  
  [Features]
  · An A type without a flange that can be installed in narrow spaces.
  · Convenient for installation on angle bases.
  · Its functions, mechanism, and capacity are the same as the A type.

  Fichiers CAD 2D / 3D disponibles

  à partir de∗ ：	169.60 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Bloc de nivellement, type C

  NABEYA

  A standard leveling block that can be used together with an anchor bolt.
  
  [Features]
  · Features good precision.
  · Machinery installation costs are reduced.
  · Can be fixed with an anchor bolt.
  · Features the best rigidity.
  · Installation is easy.
  · Ideal for the installation of milling machines, radial drilling machines, planer machines, surface plates, etc.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	140.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...