NITTA Raccords à simple pression（Type：Accouplement à simple effet）

?* À propos du délai d'expédition et des prix

• 

  Joint en Y, série E à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this Y-joint. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.98 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Coude à 90° EL-C1 ChemiFit, série C1

  NITTA

  90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	6.71 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this connector. Degradation of the surface is minimal and elution of copper ions into the liquid is also prevented.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	1.81 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccord en T série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.03 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur série E à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this connector. The surface is resistant to degradation, preventing elution of copper ions.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	1.81 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Bouchon d'obturateur série E à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 45° blank plug. The surface is resistant to degradation, preventing elution of copper ions.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	0.70 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coude à 90° EL-C1S ChemiFit, série C1S

  NITTA

  [Features]
  · A completely oil-free processed product — parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  · The tube is connected by a PushOne® fitting: No jigs nor tools are required for connecting the tube.
  · The thread section is made of SUS304 for superior strength.
  · Double clean packaging: Each item is packed individually in a cleanroom and then packaged inside a zip-seal bag.
  · The main body and thread section rotate. The orientation of the elbow, tee, etc., can be decided when connecting the tubes.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	18.16 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur EC-C1S ChemiFit, série C1S

  NITTA

  The EC-C1S connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	13.49 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccord en T ET-C1S ChemiFit, série C1S

  NITTA

  [Features]
  · Completely oil-free processed product: Parts are washed and assembled in a clean room. No oil or grease is used even for the sealing material.
  · The tube is connected by Push One®: No need for jigs or tools to connect the tube.
  · The screw part is made of SUS304 for superior screw strength.
  · Double clean packaging; each one is packed individually in a clean room and then packaged in a zipper-sealed bag.
  · The main body and screw rotate. The elbow, tee, etc., can be oriented as desired when being connected.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	24.67 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à pression pour panneau EPC-C1S ChemiFit, série C1S【5 pièces par conditionnement】

  NITTA

  [Features]
  · Completely oil-free processed product: Parts are washed and assembled in a clean room. No oil or grease is used even for the sealing material.
  · The tube is connected by Push One®: No need for jigs nor tools to connect the tube.
  · The screw part is made of SUS304 for superior screw strength.
  · Double clean packaging; each one is packed individually in a clean room and then is packaged in a zipper-seal bag.
  · The main body and screw rotate, allowing the elbow, tee, etc. to be oriented as desired during connection.

  à partir de∗ ：	104.66 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Connecteur femelle ETC-C1S ChemiFit, série C1S

  NITTA

  The EFC-C1S female connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	36.32 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Raccord coudé à 90° EUL-C1 ChemiFit, série C1

  NITTA

  The EUL-C1 90° union elbow is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	9.80 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Raccord en T EUT-C1 ChemiFit, série C1

  NITTA

  The EUT-C1 union tee is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	11.96 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Joint en Y EYB-C1 ChemiFit, série C1

  NITTA

  Y Joint EY-C1 is a completely oil-free, processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used, even for the sealing material.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	13.34 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Raccord en Y EYB-C1 ChemiFit, série C1

  NITTA

  Y Union EYB-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	14.42 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur EC-C1 ChemiFit, série C1

  NITTA

  The EC-C1 connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.87 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccordement en T EST-C1 ChemiFit, série C1

  NITTA

  The service tee EST-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	13.32 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur traversant ETC-C1 ChemiFit, série C1

  NITTA

  [Features]
  · Completely oil-free processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.
  · The tube is connected by Push One®. No need for jigs or tools to connect the tube.
  · The liquid contact part is not metal. Fluids do not make contact with any metal, so metal ions are not released.
  · Excellent non-dust and non-polluting properties. A special polypropylene resin is used as a base material.
  •  Superior smoothness of inner surface. Injection-molded for a smooth interior.
  · Double clean packaging. Each fitting is packed in a clean room and put in a zipper-sealed bag.
  ▪ The main body and the threaded part rotate. The body can rotate freely even during piping of elbow and tee.
  ▪ Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.56 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Té ET-C1 ChemiFit, série C1

  NITTA

  Tee ET-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	13.03 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à pression pour panneau EPC-C1 ChemiFit, série C1

  NITTA

  [Features]
  · A completely oil-free processed product — parts are washed and assembled in a cleanroom. No oil or grease is used even for the sealing material.
  · The tube is connected by a PushOne® fitting: No jigs nor tools are required for connecting the tube.
  · Non-metallic connecting parts. No metal-fluid contact. Therefore, there is no elution of metal ions.· Non-dust generating with superior anti-contamination properties.
  · Special polypropylene resin is utilized in the materials.
  · Excellent inner surface flatness. An injected molded product with a smooth inner surface. Double clean packaging: Each item is packed individually in a cleanroom and then packaged inside a zip-seal bag.
  · The main body and thread section rotate. The orientation of the elbow, tee, etc., can be decided when connecting the tubes.
  · This product is compliant with container packaging and device planning in accordance with the Ministry of Health, Labour and Welfare, Notification No. 201 (2006) and Notification No. 370 (1959).

  Fichiers CAD 2D disponibles

  à partir de∗ ：	22.36 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Bouchons d'obturation BC-C1 ChemiFit, série C1【5 pièces par conditionnement】

  NITTA

  Blank Plug BC-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.93 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur pour raccords union EUC-C1 ChemiFit, série C1

  NITTA

  The EUC-C1 union connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	9.59 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Réducteur ER-C1 ChemiFit, série C1

  NITTA

  Reducer ER-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.81 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Connecteurs avec fonctionnalité de valve intégrée ECV【10 pièces par conditionnement】

  NITTA

  [Features]
  · Remove the tube to open and close the valve inside the fitting. When the tube is detached, the valve shuts automatically.
  · The tube is connected using Push One®. No need for jigs or tools to connect the tube.
  · Electroless nickel plated. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · There is no need to seal the R-thread part with sealing tape.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	58.50 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Connecteur rond six pans creux, série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this hexagonal socket head connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.23 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Connecteur femelle série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this female connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	2.53 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coude à 90° série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 90° elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	9.57 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Raccord coudé femelle à 90° série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 90° female elbow. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.89 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coude à 45° série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 45° elbow unit. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.19 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coude universel, série A à action simple

  NITTA

  A universal elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  
  [Features]
  · The tubes are PushOne® type fittings.
  · Requires no jigs or tools for connect to the tubes.
  · Electroless nickel plated.
  · Degradation of the surface is minimal. The elution of copper ions into the fluids is also prevented.
  · The white body brightens the working environment.
  · A flame-retardant PBT resin is utilized in the material.
  · A UL94 V-0 standard equivalent fitting with superior self-extinguishing properties.
  · This fitting is usable in spatter dispersion environments.
  · The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.36 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coude d'embranchement à 90° série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 90° branch elbow. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.21 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coude universel double série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this double universal elbow. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	12.36 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Té, série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this T unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.45 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Raccord en T de service série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this service tee. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.72 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Raccord union série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this union connector. The surface is resistant to degradation, preventing elution of copper ions.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.25 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Coude à pression pour panneau, à 90° série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 90° panel touch elbow. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.99 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Raccord coudé à 90° série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 90° union elbow. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	3.14 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Raccord en Y, série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this Y union. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs or tools to connect the tube.
  · Electroless nickel plating.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · The white body contributes to workplace environment aesthetics.
  · Noncombustible PBT resin is used for the base material.
  · Compliant with the UL94 V-0 standard and has superior self-extinguishing properties.
  · Can be used in environments where sputtering is an issue.
  · R screws are sealed, and thus there is no need to wrap them with sealing tape

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.04 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Raccord coudé en Y double série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this double Y-union unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · The white body brightens the working environment.
  · Noncombustible PBT resin is used for the materials.
  ·Has superior self-extinguishing properties equivalent to UL94 V-0 standard.
  · Suitable for use in an environment where sputtering occurs.
  · The R screws are sealed, and so rapping with sealing tape is not required.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	14.11 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à pression pour panneau série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this panel touch connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.10 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Collecteur type A à action simple, série A

  NITTA

  No jigs or tools are required for connecting tubes to this manifold. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by Push One®.
  · No need for jigs or tools to connect the tube.
  · Electroless nickel plating.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · The white body contributes to workplace environment aesthetics.
  · Noncombustible PBT resin is used for the base material.
  · Compliant with the UL94 V-0 standard and has superior self-extinguishing properties.
  · Can be used in environments where sputtering is an issue.
  · R screws are sealed, and thus there is no need to wrap them with sealing tape

  Fichiers CAD 2D disponibles

  à partir de∗ ：	19.93 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Connecteur à pression pour panneau, femelle, série A à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this female panel touch connector. The surface is resistant to degradation, preventing elution of copper ions.

  • Remise sur volume

  Fichiers CAD 2D disponibles

  à partir de∗ ：	4.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Coude à 45° série E à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 45° elbow unit. The surface is resistant to degradation, preventing elution of copper ions.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	2.72 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Coude à 90° série E à action simple

  NITTA

  A 90-degree elbow that does not require jigs or tools for connecting to tubes. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tubes are PushOne® type fittings.
  · Requires no jigs or tools for connect to the tubes.
  · An electrogalvanized product.
  · Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  · A flame retardant resin (UL94 V-0 standard EQUIV) is utilized.
  · A flame-retardant PBT resin is utilized in the material.
  · A UL94 V-0 standard fitting with superior self-extinguishing properties.
  · This fitting is usable in spatter dispersion environments.
  · The R threads are sealed. Therefore, wrapping the threads with sealing tape is not required.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	2.88 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Coude à pression pour panneau, à 90° série E à action simple

  NITTA

  No jigs or tools are required for connecting tubes to this 90° panel touch elbow unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
  
  [Features]
  · The tube is connected by PushOne®.
  · No need for jigs nor tools to connect the tube.
  · Electroless nickel plated.
  · There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
  · Flame retardant resin (equivalent to UL94 V-0 standard) adopted.
  · Non-combustible PBT resin is used for the materials.
  · Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
  · Can be used in the environments in which sputtering occurs.
  · The R screws are sealed, and thus there is no need to wrap them with sealing tape.

  Fichiers CAD 2D disponibles

  à partir de∗ ：	5.65 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base