YANASE Roues avec arbres（Application：Polissage）
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Arbre flexible 2
YANASE
[Features]
· A drill chuck type that can be used with up to φ8.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Remise sur volume
à partir de∗ ： 84.94 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Disque de coupelle
YANASE
A product which can polish both bottom and side surfaces at the same time.
[Features]
· The tip (bottom) can also be used for added convenience.
· Polishing cloth extends further than the shaft so the bottom and sides can be used for 2 surface simultaneous polishing.
· Unlikely to clog, allowing a uniform finish to be achieved throughout.
· It is elastic, easy to fit to the workpiece.
· Due to heat dissipation, it does not alter the polished material.
· Excellent autogenous properties.
· Ideal for polishing flat surfaces, bottom surfaces and corners- Remise sur volume
à partir de∗ ： 14.77 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Roues à rabat avec arbre
YANASE
High-quality standard products that come in a vast variety of sizes and grain sizes.
[Features]
· A wide range of sizes and particle sizes with high quality.
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Remise sur volume
à partir de∗ ： 7.08 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Roue Unilon avec arbre (dur)
YANASE
Ideal for removal of scratches and rust. Can also be used for hairline finishing.
[Features]
· Selectable from abundant granularity and sizes.
· It removes burrs without scraping, with no secondary burrs.
· As it is soft, elastic and has good adaptability, it prevents fatigue.- Remise sur volume
à partir de∗ ： 8.59 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Roue Unilon avec arbre
YANASE
Prevents over-scraping, and produces a uniform finished surface with no clogging.
[Features]
· Unilon's standard product.
· Because the Unilon fibers are specially coated with abrasive, the intertwined fibers play the role of cushioning and prevent excessive grinding.
· Its autogenous properties prevent clogging.
· Polishes without scratching.
· Finishes the surface without scraping the material.
· Flexible and fits perfectly to the curved surfaces.- Remise sur volume
à partir de∗ ： 14.38 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Cône d'amortissement
YANASE
Use alundum for general polishing and zirconia for heavy polishing such as bead polishing, etc. after welding.- Remise sur volume
à partir de∗ ： 1.54 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Support de cône d'amortissement
YANASE
Since the holder part is a sponge, the contact is soft, and prevents excessive grinding.
[Features]
· Attachment when using a cushioning cone.
· Superb elasticity with the dedicated sponge.- Remise sur volume
à partir de∗ ： 15.73 € Délai d'expédition minimum ： 9 jours *Prix unitaire/configuration de base
-
Top à usage unique avec arbre
YANASE
[Features]
· This is the product you always wanted.
· The centrifugal force caused by rotation increases the diameter, making it ideal for inner surface polishing.
· Capable of heavy polishing with a soft touch.
· It is a retractable type, providing a large polishing area and beautiful finished surface.
· One-touch shaft attachment- Remise sur volume
à partir de∗ ： 3.30 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Arbre flexible 1
YANASE
[Features]
· Collet chuck type, for φ3/φ6.
· Easily usable in places where work is difficult or processes which have poor work efficiency in conventional factories, leading to improved production.
· Compared to heavy electric tools and pneumatic tools, it is lighter, easier to use, and greatly reduces fatigue.- Remise sur volume
à partir de∗ ： 174.36 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Roues à rabat avec arbre
YANASE
[Features]
· Because of the slight gap between polishing cloths, it is unlikely to clog and can be used for uniform polishing throughout.
· It is elastic, so that it fits nicely onto the workpiece for close polishing.
· It is not exothermic and does not alter the polished material.
· Fits well to workpiece.
· Boasts significant autogenous action.- Remise sur volume
à partir de∗ ： 7.17 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Application |
| Type |
| Material |
| Outer Diameter(mm) |
| Width(mm) |
| Shaft Diameter(mm) |
| Particle Size(#) |
| Stationary Diameter(mm) |
| Screw Hole Diameter(mm) |
|
|
|
|
|
|
|
|
|
| |
| Marque | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE | YANASE |
| Série du produit | ||||||||||
| à partir de∗ | 84.94 € *Prix unitaire/configuration de base Remise sur volume | 14.77 € *Prix unitaire/configuration de base Remise sur volume | 7.08 € *Prix unitaire/configuration de base Remise sur volume | 8.59 € *Prix unitaire/configuration de base Remise sur volume | 14.38 € *Prix unitaire/configuration de base Remise sur volume | 1.54 € *Prix unitaire/configuration de base Remise sur volume | 15.73 € *Prix unitaire/configuration de base Remise sur volume | 3.30 € *Prix unitaire/configuration de base Remise sur volume | 174.36 € *Prix unitaire/configuration de base Remise sur volume | 7.17 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 6 jours | 9 jours | 7 jours | 6 jours | 6 jours |
| Application | Polissage | Polissage | Polissage | Polissage | Polissage | Polissage | Polissage | Polissage | Polissage | Polissage |
| Type | - | Rabat avec arbre | Rabat avec arbre | Rabat avec arbre | Rabat avec arbre | Papier | Support | Rabat avec arbre | - | Rabat avec arbre |
| Material | - | - | - | - | - | - | - | - | - | - |
| Outer Diameter(mm) | - | 10 ～ 25 | 10 ～ 30 | 10 ～ 25 | 50 ～ 100 | - | Tip diameter ø14; Large end diameter φ20 | 10 ～ 25 | - | 10 ～ 40 |
| Width(mm) | - | 20 ～ 25 | 10 ～ 15 | 13 ～ 25 | 25 | - | 50 | 10 ～ 25 | - | 10 ～ 30 |
| Shaft Diameter(mm) | - | 3 ～ 6 | 3 | 3 ～ 6 | 6 | - | 6 | - | - | 3 ～ 6 |
| Particle Size(#) | - | 60 ～ 100 | 40 ～ 180 | 600 ～ 1500 | 120 ～ 600 | 80 ～ 150 | - | 60 ～ 240 | - | 40 ～ 600 |
| Stationary Diameter(mm) | - | - | - | - | - | - | - | - | - | - |
| Screw Hole Diameter(mm) | - | - | - | - | - | - | - | 3 ～ 6 | - | - |
Loading...
Filtrer par:
Affiner la recherche en précisant les spéc./dim.
-
Application
- Polissage
- Polissage
-
Type
- Rabat avec arbre
- Bande
- Fût
- Papier
- Support
-
Material
- Coton
- Sisal
- Flanelle
- Chamois
- Feutre
-
Outer Diameter(mm)
-
Width(mm)
-
Shaft Diameter(mm)
-
Particle Size(#)
-
Stationary Diameter(mm)
-
Screw Hole Diameter(mm)
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (2)
- ICHIGUCHI (24)
- TRUSCO NAKAYAMA (21)
- YANASE (10)
- MINITOR (9)
- MURAKO (4)
- NAKANISHI (3)
- DREMEL (2)
- NEWREGISTON (1)
- SUMFLEX (1)
- UHT (1)
- NIHON SEIMITSU KIKAI KOSAKU (0)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.