Mâchoires en croix
| Nombre de jours d'expédition |
|
|---|
?* À propos du délai d'expédition et des prix
-
Stainless Steel-T-angle connector clamps
GANTER
The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard clamping screws are socket cap screws DIN 912.They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 45.78 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Collier en croix rotatif pour charges légères
CHUO PRECISION INDUSTRIAL
[Features]
· Used to retain holder shafts and poles at free intersecting angles.
· Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.- Remise sur volume
- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 44.99 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
- En promotion
Aluminium
GANTER
The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 21.92 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Linear actuator connectors, Stainless Steel
GANTER
GN 131.1 Stainless Steel-Linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 134.84 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
T-angle connector clamps, Aluminium
GANTER
The clamping bores of GN 192 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 26.42 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Colliers en croix rotatifs (pour charges lourdes)
SURUGA SEIKI
[Features]
· A cross clamp for heavy loads.
· Poles and rods can be rotated to any angle and then fixed.
· Fixing is done using a split clamping method.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.
· There are three types available for different combinations of applicable diameters.- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 136.55 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Colliers en croix rotatifs, M5 (pour usage intensif)
SURUGA SEIKI
[Features]
· A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
· Poles and rods can be rotated to any angle and then fixed.
· Fixing is done using a split clamping method.
· Fixing is done by tightening the M5 bolts.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 124.60 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Collier en croix rotatif
SURUGA SEIKI
A cross clamp for fixing a pole or a rod at an arbitrary angle. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 48.30 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Collier en croix, modèle monté (pour charge lourde)
SURUGA SEIKI
[Features]
· A cross clamp for heavy loads.
· Poles or rods can be orthogonally connected.
· Fixing is done using split clamping.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.
· There are three types available for different combinations of applicable diameters.- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 109.17 € Délai d'expédition minimum ： 10 jours *Prix unitaire/configuration de base
-
Collier en croix, modèle monté M5 (pour charge lourde)
SURUGA SEIKI
[Features]
· A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
· Poles or rods can be orthogonally connected.
· Fixing is done using split clamping.
· Fixing is done by tightening the M5 bolts.
· Features a slitted fixing section. Twist the clamp section to securely fix the object.- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 62.15 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
Collier en croix sur support
SURUGA SEIKI
A cross clamp for orthogonally connecting poles or rods. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 38.56 € Délai d'expédition minimum ： 6 jours *Prix unitaire/configuration de base
-
- En promotion
Collier en croix sur support
CHUO PRECISION INDUSTRIAL
[Features]
· Used to retain holder shafts and poles orthogonally (at 90°) to each other.
· Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.- Remise sur volume
- Fichiers CAD 2D disponibles
Configurer maintenantà partir de∗ ： 38.28 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Angle connector clamps
GANTER
The clamping bores of the angle connector clamps GN 196 are specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 61.18 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Flanged two-way connector clamps, multi part assembly
GANTER
The clamping bores of the flanged two-way connector clamps GN 141 are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square designs are also suitable for use in profile systems.
Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 48.34 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Linear actuator connectors, Aluminium
GANTER
GN 131.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 45.92 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Linear actuator connectors, Aluminium
GANTER
Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 47.66 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Linear actuator connectors, Aluminum
GANTER
GN 134.1 linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 88.80 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
-
Linear actuator connectors, Aluminum
GANTER
GN 135.1 Linear actuator connectors are normally supplied mounted only in connection with a square linear actuator and for function control.
The fixing bores for the follower are always located in the lid of the d1 bore and/or the s1 square. Centering bushings in the through-hole eliminate the axial clearance. The width of the s1 square is dimensionally aligned with the play of the square linear actuators.
The square s2 of the linear actuator connector is supplied not machined in the standard design.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 121.54 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Linear actuator connectors, Stainless Steel
GANTER
Stainless Steel-Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 208.50 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Stainless Steel-Two-way connector clamps
GANTER
The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 45.94 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
T-angle connector clamps, Aluminium
GANTER
The clamping bores of GN 193 T-angle connector clamps are not machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 37.24 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
T-angle connector clamps, Aluminium
GANTER
The clamping bores of GN 194 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 42.60 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
T-angle connector clamps, Aluminium
GANTER
The clamping bores of GN 195 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The versions with square bores are also suitable for profile systems.
The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 61.98 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
T-angle linear actuator connectors, Aluminium
GANTER
T-angle linear actuator connectors GN 191.1 are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 47.32 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
T-angle linear actuator connectors, Stainless Steel
GANTER
GN 191.1 Stainless Steel-T-angle linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 133.42 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Two-way connector clamps, Aluminium
GANTER
The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 21.96 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Two-way connector clamps, Aluminium
GANTER
The clamping bores of GN 132 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 25.74 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Two-way connector clamps, Aluminium
GANTER
The clamping bores of GN 133 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 25.64 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
- En promotion
Two-way connector clamps, multi part assembly, same bore dimensions
GANTER
The clamping bores of GN 134 flanged two-way con-nector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The versions with square bores are also suitable for profile systems.
Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 36.54 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Two-way connector clamps, multi part assembly, unequal bore dimensions
GANTER
The clamping bores of GN 135 two-way connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
The square designs are also suitable for use in profile systems.
The bore holes and squares must be put together such that an adaptation between between different tube cross-sections is possible.
The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
Configurer maintenantà partir de∗ ： 49.64 € Délai d'expédition minimum ： 5 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | GANTER | CHUO PRECISION INDUSTRIAL | GANTER | GANTER | GANTER | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | SURUGA SEIKI | CHUO PRECISION INDUSTRIAL | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Two-way connector clamps, multi part assembly, same bore dimensions | Two-way connector clamps, multi part assembly, unequal bore dimensions | ||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| à partir de∗ | 45.78 € *Prix unitaire/configuration de base Remise sur volume | 44.99 € *Prix unitaire/configuration de base Remise sur volume | 21.92 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 134.84 € *Prix unitaire/configuration de base Remise sur volume | 26.42 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 136.55 € *Prix unitaire/configuration de base | 124.60 € *Prix unitaire/configuration de base | 48.30 € *Prix unitaire/configuration de base | 109.17 € *Prix unitaire/configuration de base | 62.15 € *Prix unitaire/configuration de base | 38.56 € *Prix unitaire/configuration de base | 38.28 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 61.18 € *Prix unitaire/configuration de base Remise sur volume | 48.34 € *Prix unitaire/configuration de base Remise sur volume | 45.92 € *Prix unitaire/configuration de base Remise sur volume | 47.66 € *Prix unitaire/configuration de base Remise sur volume | 88.80 € *Prix unitaire/configuration de base Remise sur volume | 121.54 € *Prix unitaire/configuration de base Remise sur volume | 208.50 € *Prix unitaire/configuration de base Remise sur volume | 45.94 € *Prix unitaire/configuration de base Remise sur volume | 37.24 € *Prix unitaire/configuration de base Remise sur volume | 42.60 € *Prix unitaire/configuration de base Remise sur volume | 61.98 € *Prix unitaire/configuration de base Remise sur volume | 47.32 € *Prix unitaire/configuration de base Remise sur volume | 133.42 € *Prix unitaire/configuration de base Remise sur volume | 21.96 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 25.74 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 25.64 € *Prix unitaire/configuration de base Remise sur volume | 36.54 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 49.64 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum | 7 jours | 6 jours | Jour même | 7 jours | Jour même | 6 jours | 6 jours | 6 jours | 10 jours | 6 jours | 6 jours | Jour même | 7 jours | 7 jours | 7 jours | 7 jours | 5 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | 7 jours | Jour même | Jour même | 3 jours | Jour même | 5 jours |
Loading...
Filtrer par :
Stock
-
- Afficher les articles en stock uniquement
Type de données CAO
-
- 2D
- 3D
Catégories relatives à « Mâchoires en croix »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.