Autres formes（Unité, type：Unité de roulement）

?* À propos du délai d'expédition et des prix

• 

  Palier tendeur avec applique, type à alésage cylindrique et vis de serrage, type UCT200+WB

  ASAHI SEIKO

  Combines a take-up unit with a steel plate frame, and the adjustment bolts enable more flexible adjustment of the shaft center.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	138.86 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Palier tendeur avec applique en tôle d'acier SBNPTH

  NIPPON PILLOW BLOCK

  The SBNPTH is a lightweight type unit that combines a steel plate take-up unit, a steel plate frame, and an adjustment bolt.
  The bearing box can be moved in a radial direction using the adjustment bolt to adjust the support position for the shaft.
  A compact and lightweight unit with a bearing box and frame made of pressed steel plate.
  The frame is mounted to the machine body with 4 bolts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	88.64 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Unités extensibles

  NTN

  A combination grooved steel frame and bearing unit.
  Can be used for belt and chain adjustments in areas where free movement of the axis is required.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	113.17 €
  	Prix spécial
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Avant-trou

  MISUMI

  • Remise sur volume

  • Grande quantité possible (D-JIT)

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Paliers tendeurs

  MISUMI

  • Remise sur volume

  • Grande quantité possible (D-JIT)

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.76 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Unité de suspension, modèle à trou cylindrique avec vis de serrage, modèle UCECH

  ASAHI SEIKO

  [Features]
  · The bearing box is fitted with screw holes for pipes, and designed to hang down from steel pipes mounted to conveyors. For this reason, it is appropriate for use as a bearing for screw conveyor hangers.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.63 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Unité à paliers tendeurs en fonte, modèle UCT

  NIPPON PILLOW BLOCK

  A combination bearing unit that contains a bearing and a bearing box fitted with a slide groove. The bearing box can be moved along the slide groove in a radial direction to adjust the support position. With cylindrical holes as a general usage condition, this high precision unit can be used for a variety of applications.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	20.27 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Roulement insert SB

  NIPPON PILLOW BLOCK

  The SB type bearing is an oil free grease-sealed deep-groove ball bearing with an outer ring that has a spherical surface on the outer diameter and a wide inner ring that has cylindrical holes with set screws included.
  
  A lightweight bearing suitable for use with light to normal loads, that can be easily and securely attached to the shaft using the 2 inner ring set screws with a 120° interval.
  

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.40 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Forme à palier tendeur en fonte

  NTN

  The bearing box is fitted with a slide groove and structured to move freely.
  For this reason, it is suitable for use in places that require adjustment of the bearing to shaft distance.
  
  [Features]
  · Accuracy rating: JIS B 1704: 1978 level 3.
  · Items not available in the standard product lineup can be ordered with a short delivery time.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.91 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Palier tendeur, type à alésage cylindrique avec vis de serrage, type UCT

  ASAHI SEIKO

  Can be used for belt and chain adjustments in areas where free movement of the shaft center is required.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	23.79 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Roulement à insert, modèle à trou cylindrique avec vis de serrage, modèle UC

  ASAHI SEIKO

  [Features]
  · Spherical outer diameter surface for alignment function. Two-layer sealed bearing that fixes to the shaft on one side of the wide inner ring with two hex socket head set screws.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.39 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Roulements à insert UC

  NIPPON PILLOW BLOCK

  Grease-sealed deep-groove ball bearing with an outer ring that has a spherical outer diameter surface fitted with an oil supply mechanism, as well as a wide inner ring that has cylindrical holes with set screws included.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.69 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Unité à paliers tendeurs, modèle avec adaptateur UKT

  NIPPON PILLOW BLOCK

  [Features]
  · A combination bearing unit that contains a bearing and a bearing box fitted with a slide groove.
  · The bearing box can be moved along the slide groove in a radial direction to adjust the support position.
  · With cylindrical holes as a general usage condition, this high precision unit can be used for a variety of applications. *Adapter sold separately.
  · Please confirm the compatible adapters in our catalog.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	28.09 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Roulements à insert UK

  NIPPON PILLOW BLOCK

  Grease-sealed deep groove ball bearing with an outer ring which has a spherical outer diameter surface with an oil supply mechanism installed, as well as a taper hole ring.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	13.69 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roulement insert, type à alésage cylindrique avec vis de serrage, type B

  ASAHI SEIKO

  Both surfaces are sealed with a rubber seal, and the width of the inner and outer rings are narrower than in a UC-type bearing.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	10.46 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Modèle de chapeau MUSP, méthode à roue excentrique, série économique Argent en acier inoxydable

  ASAHI SEIKO

  The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well. Environmentally friendly series
  
  [Features]
  · Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
  · Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
  · Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
  · This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
  · Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
  · Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
  · Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
  · Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	66.95 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Modèle de cartouche en fonte

  NTN

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.17 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Forme à support en fonte

  NTN

  The shaft and vertical direction cross-sectional area are extremely small, and the product is designed to be suitable as an intermediary bearing for use with screw conveyors. As a result, it can be used hanging down with pipe or other material mounted in the single-position screw hole.

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.77 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Roulement insert ER

  NIPPON PILLOW BLOCK

  A grease-sealed deep groove ball bearing with outer ring which has a cylindrical outer diameter surface that is fitted with an oil supply mechanism and includes a stopper ring, as well as a wide inner ring which has cylindrical holes with set screws included.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.83 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Roulement insert RB

  NIPPON PILLOW BLOCK

  This bearing format is an ER-shaped bearing with the oil supply mechanism and stopping ring removed. A grease-sealed deep groove ball bearing with outer ring which has a cylindrical outer diameter surface and an inner ring which has cylindrical holes with set screws included.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	15.20 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Unité UCTL à paliers tendeurs en acier rainuré

  NIPPON PILLOW BLOCK

  This take-up unit features a frame made from grooved steel, and is a unit product combined with an adjustment bolt.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	57.11 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  Unité en fonte, type à cartouche, UCC

  NIPPON PILLOW BLOCK

  This bearing unit combines a bearing and bearing box with a cylinder-shaped outer diameter surface. The bearing box is a cylinder shape machined with h7 accuracy, so it can be used embedded in the cylindrical hole of machinery main bodies.

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	382.56 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Palier à cartouche, type à alésage cylindrique avec vis de serrage, type UCC

  ASAHI SEIKO

  Combines bearings with a cylindrical bearing box made of cast iron with the outer diameter surface given a grinding finish. The entire unit can be used in the same way as a general bearing, and it is suitable for a transmission shaft that expands and contracts.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	53.02 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Paliers d'insertion, série en acier inoxydable, modèle à trou cylindrique avec vis de serrage, modèle MUC

  ASAHI SEIKO

  [Features]
  · Although the size is identical to the UC shape, the outer ring, inner ring, ball, slinger, and set screws are all made of stainless steel.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	57.11 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Modèle à embase rhombique, méthodes à roue excentrique, série acier inoxydable, argent économique

  ASAHI SEIKO

  [Features]
  · The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	62.90 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...