Tuyaux / accessoires pour tuyaux（Environnement de fonctionnement：Résistance à la chaleur）

?* À propos du délai d'expédition et des prix

• 

  TOMBO N° 9003 NAFLON, tube PTFE

  NICHIAS

  Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.
  
  [Features]
  · Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).
  · The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).
  · Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).
  · The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	43.29 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON UFL (tube en polyuréthane résistant à l'usure)

  JUNKOSHA

  Mechanical strength, and wear resistance in particular, is excellent. Excels in heat and low temperature resistance. Flexible, with high impact resilience.
  Note: Use Junron UF when water resistance in particular is required.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.15 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyaux / tuyau en silicone 10 m/20 m (la longueur peut être indiquée par incréments de 0,5 mm)

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	5 jours

• • En promotion

  

  JUNRON A (tube en nylon) JUNRON AS1 (tube en nylon souple, série en pouces)

  JUNKOSHA

  Excellent mechanical strength, as well as pressure, wear resistance, and flexural fatigue resistance. Excels in heat and low temperature resistance. High flexibility. Excels in oil and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.97 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  JUNRON U (tube en polyuréthane) JUNRON UF (micro-tube en polyuréthane)

  JUNKOSHA

  Features superior mechanical strength, including wear resistance. Excels in heat and low-temperature resistance. Flexible, with high impact resilience.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	94.51 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube en nylon rigide (non plastifié), nylon N1

  NITTA

  [Features]
  · A 100% unplasticized nylon resin tube.
  · This tube is suitable for high-pressure applications.
  · It can be used in high temperature regions up to 120℃.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	41.61 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  TLM, Tube fluoropolymère, Dimensions en mm

  SMC

  Superior heat resistance: fluoropolymer tubing (PFA) metric size, TLM series.
  [Features]
  · Uses highly chemical-resistant fluoropolymer.
  [Applications]
  · Used in the manufacture of solar cells, liquid crystals, hard disk drives, and in the healthcare and food industries.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	4.06 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube à pression, tube en nylon TN

  CHIYODA TSUSHO

  Robust nylon tube with superior burst pressure (6 MPa).
  
  [Features]
  · High burst pressure: very robust with high burst pressure.
  · Superior outer diameter precision: outer diameter precision noted in the model table.
  · Cut Marks and model view: cut marks printed at 1 m intervals are optimal for cutting work and inventory control

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	15.13 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube en polyuréthane série P-flex résistant à la chaleur et à l'eau

  CHIYODA TSUSHO

  Resistant to hot water and optimal for cooling water piping. Can also be used for air.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	100.95 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  JUNRON A (tube en nylon) JUNRON AS2 (tube en nylon résistant aux pressions élevées)

  JUNKOSHA

  [Features]
  · Excellent mechanical strength (pressure resistance, wear resistance, and bending fatigue tolerance).
  · Highly flexible.
  · Superior cold- and heat-resistance properties.
  · Temperature range of resin for continuous operation without load: -40° to 93℃ with high flexibility.
  · The product is highly oil and chemical resistant (displays high alkaline resistance in particular).
  · No risk of poisonous substances being released.
  · Lightweight and workable.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.48 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tubes - Type résine fluorée

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	5 jours

• • En promotion

  

  Tubes droits en résine fluorée résistants à la corrosion (PFA)

  NIHON PISCO

  Excellent chemical/heat resistance and weatherproofing. * Tube can be cut.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	6.68 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube TOMBO n° 9003-BT NAFLON BT

  NICHIAS

  Tube with superior flexibility and transparency which employs a single type of fluorine resin. Suitable for use for piping in narrow spaces.
  
  [Features]
  · Bends easily and thus is not prone to buckling even when the turning radius is tight.
  · More transparent than normal PTFE tubes.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	133.74 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Tube JUNFLON PFA haute barrière

  JUNKOSHA

  A hybrid tube that uses a fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer. The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
  
  [Features]
  · A fluoropolymer tube with superior barrier properties.
  · A hybrid tube that uses fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer.
  · The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
  · The barrier properties of the fluoropolymer is superior to the barrier properties of the acids (hydrochloric acid, nitric acid, etc.) and ammonia.
  · Suppresses the permeation of acids in comparison to conventional PFA tubing.
  · Reduces adverse environmental impacts on the wider environment.
  · The transparency of the fluid can be maintained over a long period of time.
  · The mechanical properties are equivalent to a conventional PFA tubing.
  · This product is manufactured from raw material input to the molding and packaging in a consistently managed clean environment.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	42.47 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON A (tube en nylon) JUNRON AS1 (tube en nylon souple, série métrique)

  JUNKOSHA

  [Features]
  · Excellent mechanical strengths (especially, pressure resistance, wear resistance and bending fatigue tolerance).
  · Product has superior low temperature and heat resistance properties.
  · Highly flexible.
  · Product has superior oil resistance and chemical resistance properties (especially alkali resistance).
  ▪ No risk of toxic substances being released.
  ▪ It is light in weight and has excellent workability

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON UF (tube en polyuréthane souple résistant à l'eau)

  JUNKOSHA

  Excellent mechanical strength and wear resistance.
  
  [Features]
  · Excellent mechanical strength and pressure/wear resistance.
  · Excellent performance at low and high temperatures.
  · Resin continuous no-load operation temperature range: -40 ~ +80°C.
  · Flexible and with a high impact resilience rate.
  · No risk of poisonous substances being released.
  · Minimal bending radius. Excellent workability.
  · *For water resistance, please use Junlon UF.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube en fluoropolymère gamme TL / TIL

  SMC

  Fluoropolymer tubing with a highly smooth internal surface.
  [Features]
  · Maximum operating pressure 1.0 MPa or less (at 20°C).
  · Maximum operating temperature: 260°C (varies depending on the conditions).
  [Applications]
  · Suitable for applications requiring a small amount of elution of fluorine ions.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.10 €
  Délai d'expédition minimum ：	4 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube en fluoropolymère (FEP) gamme TH/TIH

  SMC

  A fluoropolymer tubing with superior durability in chemical environments.
  [Features]
  · Compatible with Japan's Food Sanitation Law.
  · Operating temperature: 200°C (varies depending on the conditions).
  · Maximum operating pressure 2.3 MPa or less (at 20°C) (varies by size).
  · Complies with the FDA (Food and Drug Administration) §177-1550 dissolution test.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	41.63 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tubes - Caoutchouc fluoré, type transparent

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	7 jours

• 

  Tubes - Type caoutchouc fluoré

  MISUMI

  • Remise sur volume

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	5 jours

• 

  Tubes - Type souple en résine fluorée

  MISUMI

  • Grande quantité possible (D-JIT)

  Fichiers CAD 2D / 3D disponibles

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	70.14 €
  Délai d'expédition minimum ：	5 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tubes droits en résine fluorée (PFA) pour plomberie en environnement propre

  NIHON PISCO

  A tube for clean rooms (equivalent to ISO Class 6).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	72.29 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube L anti-éclaboussures en polyuréthane souple

  CHIYODA TSUSHO

  A tube featuring sputtering resistance. Can also be used with air and cooling water.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	113.17 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyau jumelé L anti-éclaboussures en polyuréthane souple.

  CHIYODA TSUSHO

  [Features]
  · Directly inherits the features of the TE tube.
  · A sputter-preventing tube optimal for in-out piping

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	251.45 €
  Délai d'expédition minimum ：	15 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube mince L anti-éclaboussures en polyuréthane souple

  CHIYODA TSUSHO

  Tube with flexibility in addition to sputtering resistance.
  
  [Features]
  · Achieves both sputtering resistance and flexibility. By thinning the outer skin of a conventional L-Flex tube, sputtering resistance is improved and excellent flexibility is provided.
  · Lightweight 25% lighter weight compared to conventional L-Flex tubing.
  · Excellent outer skin peeling properties. The outer skin is easier to peel and construction is easier than with conventional two-layer tubing

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	60.77 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tuyau souple L résistant aux éclaboussures modèle ALE

  CHIYODA TSUSHO

  A tube with a 3-layered structure. Features the best specifications among Chiyoda Tsusho’s tubes for sputtering.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	134.20 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube anti-éclaboussures en polyuréthane gainé

  CHIYODA TSUSHO

  Sputter prevention tube which uses chloroprene rubber on the outer skin.
  
  [Features]
  · For air only; directly inherits the features of TP inner.
  · Wide range of color variation, which is convenient for pipe management.
  · Two-layer tube with chloroprene rubber used for the outer skin

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	126.19 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale, modèle GS

  MUROMOTO TEKKO

  Use at locations that require flow rate.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	88.69 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Flexible en spirale

  MUROMOTO TEKKO

  Small wound diameter at φ28mm. Offers a wide range of uses, including air-driven equipment. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.03 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible en spirale, modèle SE

  MUROMOTO TEKKO

  This is used for general factory production lines with straight component lengthened on the manual side. Internal diameter of tube 5, external diameter of tube 8
  
  [Features]
  · Breakthrough air hose whose standard product has just φ28 mm outer diameter by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
  · Light and easy to handle thanks to φ28 mm outer diameter (standard type).
  · Thanks to the free expansion and contraction and its light weight (1/3 of rubber hose), the grip operation is easy and no fatigue feeling is given to workers.
  · It is highly resilient, and will not pose any problems from going through severe repeated testing that entails running over it with a truck, etc.
  ▪ 3 to 5 times abrasion resistance compared to rubber hose.
  ▪ Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine and benzaldehyde is used.
  ・Heat resistance 70°C .
  ▪ Cold-resistance: Does not lose its flexibility even at -10°C.
  ▪ Can withstand expansion/contraction tests performed at an air pressure of 0.7 MPa for more than 300, 000 times without any regularities.
  ▪ With smaller outer curling diameter and straight wires of a constant dimensions at both ends of the hose, the hose does not break even when handled roughly.
  ▪ As the hose color is pale green, it is easy on the eyes

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	44.55 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Flexible torsadé Jumbo

  MUROMOTO TEKKO

  Semi-braided hose with a pressure resistance capable of withstanding air pressures up to 1.5 Mpa. Suitable for gas stations and car repair shops.
  
  [Features]
  ・
  · Light and easy to handle thanks to φ28 mm outer diameter (standard type).
  · Thanks to its ability to be freely expanded/contracted and its light weight (1/3 that of the rubber hose), grip operation is easy, helping alleviate fatigue in workers.
  · It is highly resilient, and stands up, problem-free, to repeated testing, including being run-over by trucks etc.
  ▪ Offers 3 to 5 times the abrasion resistance of the rubber hose.
  ▪ Chemical resistance (30 days): Uses material able to withstand almost all chemicals except hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, chlorine and benzaldehyde.
  · Heat resistance 70°C.
  ▪ Cold-resistance: Does not lose its flexibility, even at -10°C.
  ▪ Can withstand over 300, 000 expansion/contraction tests performed at air pressures of 0.7 MPa without displaying any abnormalities.
  ▪ With a small outer curling diameter and straight wires with set dimensions at both ends of the hose, the hose will not break, even when handled roughly.
  · Its pale green color is easy on the eyes.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	81.79 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible droit

  MUROMOTO TEKKO

  Can be used separately. Tube with 5-mm internal diameter x 8-mm external diameter; available cut lengths: 2 m, 3 m, 5 m, 7 m, and 10 m.
  
  [Features]
  · Breakthrough air hose with an outer diameter of just 28 mm achieved by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
  · Light and easy to handle thanks to the 28 mm outer diameter (standard type).
  · Thanks to the free expansion and contraction and lightweight (1/3rd rubber hose), the product is easy to grip.
  · It is highly resilient, and will withstand severe repeated application of force, such as running over it with a truck.
  · Abrasion resistance three to five times superior than a rubber hose.
  · Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine, and benzaldehyde.
  · Heat resistance: 70°C .
  · Cold-resistance: Does not lose flexibility even at -10°C.
  · Can withstand expansion/contraction performed at air pressure of 0.7 MPa more than 300, 000 times without any abnormalities.
  · With smaller outer curling diameter and straight tubing of a constant dimension at both ends of the hose, the hose does not break even when handled roughly.
  · Attractive pale green color.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.35 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale avec flexible droit

  MUROMOTO TEKKO

  The straight part of this hose is long, making it particularly well-suited for operational applications such as heavy equipment and construction machinery as well as production lines that demand long distances. Internal diameter of tube 5, external diameter of tube 8

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	55.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale étirable, modèle LS

  MUROMOTO TEKKO

  The thick middle curl is highly extensible, giving it good operability when a given flow rate is necessary. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	51.68 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale à paroi épaisse

  MUROMOTO TEKKO

  Wide wound diameter at φ56mm; the coiled part can be extended up to 10 times its length, allowing a wide range of applications. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.55 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible torsadé étirable, diamètre épais, modèle GSL

  MUROMOTO TEKKO

  Suited for work requiring a short total length in the curled part and a large flow rate (when the flow rate of the current hose is insufficient). Tube internal diameter × external diameter = 8 × 12

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	97.03 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tuyau FEP Yodo-Fluoron (polymère fluoré)

  YODOGAWA HU-TECH

  A fluororesin polymer (FEP) tube. Excels in permeation resistance.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	82.45 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube spaghetti CHUKOH FLO, tuyau en PTFE (taille en mm)

  CHUKOH CHEMICAL INDUSTRIES

  Fluororesin tube with excellent heat resistance, chemical resistance, non-viscous properties, and electrical insulation properties.
  
  [Features]
  · Thin tubular product made of various fluororesins.
  · Product has superior heat resistance, non-viscous, chemical resistance, and electrical insulation properties, and is used in various industries

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	102.72 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Tube JUNFLON (tube en polymère fluoré) Tube JUNFLON FEP (tube en polymère fluoré)

  JUNKOSHA

  [Features]
  · Product has superior low-temperature and heat-resistance properties.
  · Non-load continuous operating temperature PFA < -65°C to +260°C, FEP < -65°C to +200°C.
  · Inactive to most chemicals and solvents.
  · Product has superior weather-resistance properties and does not deteriorate over time.
  · Most substances are unlikely to adhere, and easy to remove if they do.
  · Flame retardant.
  · Superior electrical characteristics.
  · No risk of poisonous substances being released.

  Sélectionner et comparer

  Configurer maintenant
  Délai d'expédition minimum ：	10 jours

• • En promotion

  

  Tube JUNFLON (tube en polymère fluoré) Tube JUNFLON FT (tube spiralé en polymère fluoré PFA)

  JUNKOSHA

  [Features]
  ·A fitting with a superior heat/low-temperature resistance.
  · Non-load continuous operating temperatures: PFA < -65–260℃/FEP < -65–200℃.
  · Inert to most of chemicals and solvents.
  · This fitting has superior weather resistance and resistance to ageing.
  · Adhesion-resistant and easy to keep clear.
  · Flame retardant.
  · Superior electrical characteristics.
  · No risk of toxic substance elution.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	51.00 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  JUNRON A (tube en nylon) JUNRON AC1 (tube de contrôle en nylon souple)

  JUNKOSHA

  Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Excels in heat and low temperature resistance. High flexibility. Excels in oil resistance and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	240.26 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  JUNRON U (tube en polyuréthane) JUNRON UF (tube en polyuréthane pour raccords crantés)

  JUNKOSHA

  Mechanical strength, in particular wear resistance is excellent.
  
  [Features]
  · Excellent mechanical strengths (especially, pressure resistance and wear resistance).
  · Product has superior low temperature and heat resistance properties.
  · Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
  · Flexible and high impact resilience rate.
  · No risk of poisonous substances being released.
  · Minimum bending radius. Excellent workability.
  · *If you need water resistance, use Junlon UF.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.72 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON UH (tube en polyuréthane souple)

  JUNKOSHA

  [Features]
  · Excellent mechanical strengths (especially, pressure resistance and wear resistance).
  · Product has superior low temperature and heat resistance properties.
  · Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
  · Flexible and high impact resilience rate.
  · No risk of poisonous substances being released.
  · Minimum bending radius. Excellent workability.
  Note: Use Junron UF when water resistance is required.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.74 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON US (tube en polyuréthane ultra souple)

  JUNKOSHA

  Features superior mechanical strength, including wear resistance. Excels in heat and low-temperature resistance. Flexible, with high impact resilience.
  Note: Use Junron UF if water resistance is required.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible spiralé en uréthane (CHA)

  TRUSCO NAKAYAMA

  [Features]
  ● Superior in flexibility, elasticity, oil resistance, chemical resistance, abrasion resistance, heat resistance, and operability.
  ● Urethane air hose applying advantage of polyurethane material.
  

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.05 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...