Tuyaux / accessoires pour tuyaux（Fluide applicable：Air Page 3）

?* À propos du délai d'expédition et des prix

• • En promotion

  

  Tuyau Toaron G

  KOKUGO

  Transparent tube with superior chemical resistance.
  
  [Features]
  · Has ultra-high elasticity, transparency, and superior cold resistance.
  · Has superior chemical resistance, weather resistance, ozone resistance, sulfidation resistance, and superior repeated compressibility characteristics.
  · The operating temperature range is -40℃ to +70℃

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	14.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible en spirale, modèle GS

  MUROMOTO TEKKO

  Use at locations that require flow rate.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	89.81 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Flexible en spirale

  MUROMOTO TEKKO

  Small wound diameter at φ28mm. Offers a wide range of uses, including air-driven equipment. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.34 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Flexible en spirale, modèle SE

  MUROMOTO TEKKO

  This is used for general factory production lines with straight component lengthened on the manual side. Internal diameter of tube 5, external diameter of tube 8
  
  [Features]
  · Breakthrough air hose whose standard product has just φ28 mm outer diameter by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
  · Light and easy to handle thanks to φ28 mm outer diameter (standard type).
  · Thanks to the free expansion and contraction and its light weight (1/3 of rubber hose), the grip operation is easy and no fatigue feeling is given to workers.
  · It is highly resilient, and will not pose any problems from going through severe repeated testing that entails running over it with a truck, etc.
  ▪ 3 to 5 times abrasion resistance compared to rubber hose.
  ▪ Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine and benzaldehyde is used.
  ・Heat resistance 70°C .
  ▪ Cold-resistance: Does not lose its flexibility even at -10°C.
  ▪ Can withstand expansion/contraction tests performed at an air pressure of 0.7 MPa for more than 300, 000 times without any regularities.
  ▪ With smaller outer curling diameter and straight wires of a constant dimensions at both ends of the hose, the hose does not break even when handled roughly.
  ▪ As the hose color is pale green, it is easy on the eyes

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	45.11 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible droit

  MUROMOTO TEKKO

  Can be used separately. Tube with 5-mm internal diameter x 8-mm external diameter; available cut lengths: 2 m, 3 m, 5 m, 7 m, and 10 m.
  
  [Features]
  · Breakthrough air hose with an outer diameter of just 28 mm achieved by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
  · Light and easy to handle thanks to the 28 mm outer diameter (standard type).
  · Thanks to the free expansion and contraction and lightweight (1/3rd rubber hose), the product is easy to grip.
  · It is highly resilient, and will withstand severe repeated application of force, such as running over it with a truck.
  · Abrasion resistance three to five times superior than a rubber hose.
  · Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine, and benzaldehyde.
  · Heat resistance: 70°C .
  · Cold-resistance: Does not lose flexibility even at -10°C.
  · Can withstand expansion/contraction performed at air pressure of 0.7 MPa more than 300, 000 times without any abnormalities.
  · With smaller outer curling diameter and straight tubing of a constant dimension at both ends of the hose, the hose does not break even when handled roughly.
  · Attractive pale green color.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	26.67 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale avec flexible droit

  MUROMOTO TEKKO

  The straight part of this hose is long, making it particularly well-suited for operational applications such as heavy equipment and construction machinery as well as production lines that demand long distances. Internal diameter of tube 5, external diameter of tube 8

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	56.05 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale étirable, modèle LS

  MUROMOTO TEKKO

  The thick middle curl is highly extensible, giving it good operability when a given flow rate is necessary. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	52.33 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible en spirale à paroi épaisse

  MUROMOTO TEKKO

  Wide wound diameter at φ56mm; the coiled part can be extended up to 10 times its length, allowing a wide range of applications. Internal diameter of tube 5, external diameter 8.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.97 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Flexible torsadé étirable, diamètre épais, modèle GSL

  MUROMOTO TEKKO

  Suited for work requiring a short total length in the curled part and a large flow rate (when the flow rate of the current hose is insufficient). Tube internal diameter × external diameter = 8 × 12

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	98.26 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube spiral en uréthane UC / USC / UMC

  NITTA

  [Features]
  · UC/USC/UMC models are tubes made by processing urethane coils "U2" into a coil shape.
  · "USC" tube is a coil tube with more compact coil diameter compared to "UC".
  · "UMC" tube is a coil tube made by welding multiple tubes together to enable multi piping.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	9.79 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Uréthane pour pneumatique générale (super flexible) U5

  NITTA

  [Features]
  ▪ Among all urethane tubes, the U5 urethane tube has the least bending stress and excellent workability.
  ▪ Since ether-based polyurethane resin is used, there is less erosion and deformation caused by moisture and mold at high temperature and humidity.
  ▪Barb fittings (bamboo shoot joints) can be used.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.99 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube à plusieurs conduites en uréthane UML

  NITTA

  Urethane multi-line tube UML is a urethane tube "U2" is a multiple welding processed tube.
  
  [Features]
  ・The urethane tube "U2" is a multiple installed tube

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	8.28 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tuyau flexible en résine fluorée 2 couches pour revêtement (souple, résistant à l'abrasion) TES

  NITTA

  Two-layer structure consisting of inside layer (special fluororesin) + outer layer (special nylon resin). Excellent in flexibility and suitable for movable piping such as robots. Semi-transparent, so fluids can be visually checked.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	70.35 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube antistatique UE pour pneumatique générale (conductivité)

  NITTA

  [Features]
  · Conductive polyurethane elastomer is used in this antistatic tube UE.
  · Does not accumulate static electricity, and prevents sparks (Surface resistance: 105 to 103 Ohms).
  · Excellent flexibility.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	43.39 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube spiral en nylon S

  NITTA

  A highly resilient nylon coil tube S that does not elongate easily by losing elasticity.
  
  [Features]
  · A coil tube that is highly resilient and does not elongate easily by losing elasticity.
  · The tubes have superior heat resistance.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	70.04 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube en nylon pour conduites multi-usages N2

  NITTA

  This nylon tube N2 features excellent oil resistance, chemical resistance, and abrasion resistance. The group 2 type can be used at a maximum of 4.8 Mpa (at 20°C).
  
  [Features]
  · Product features superior oil resistance and chemical resistance properties.
  · The group 2 type can be used at a maximum of 4
  · .8 Mpa (at 20°C).
  · Product features superior abrasion resistance

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	12.44 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube en nylon souple, nylon N5

  NITTA

  Nylon tube N5 has excellent abrasion resistance and is the most flexible of the nylon tubes. · This tube also offers superior oil resistance and chemical resistance.
  
  [Features]
  · Most flexible of the nylon tubes.
  ·Superior abrasion resistance.
  ·Superior oil resistance and chemical resistance

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	17.07 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube ignifuge pour soudage par point de tuyauterie FS

  NITTA

  Flame retardant tube FS has excellent self-extinguishing capabilities corresponding to UL94 Standard V-0. Excellent flexibility due to single layer structure. Marking is added to total length for indicating insert length.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	33.75 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube ignifuge pour soudage par point de tuyauterie (2 couches) FW

  NITTA

  Flame retardant tube FW is excellent in self-extinguishing in compliance with UL94 Standard V-0. With two-layer structure to which flame retardant resin is applied in both inner and outer layers, markings along its total length indicate the depth of insertion.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	74.87 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube ignifuge pour soudage par point de tuyauterie (flexible) FWU

  NITTA

  Superior in self-extinguishing due to external layer of flame retardant resin (UL94 Standard V-0 equivalent) provided. Internal layer uses ether type polyurethane resin to minimize erosion and degradation due to moisture or mold under high temperature/high humidity conditions.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	115.89 €
  Délai d'expédition minimum ：	8 jours

  *Prix unitaire/configuration de base

• 

  Tube en résine fluorée pour produits TP propres résistant à la chaleur, aux basses températures et à la corrosion

  NITTA

  The fluorine resin tube clean TP is a tube of FEP (tetrafluoride ethylene-hexafluoride propylene polymer) resin with superior chemical resistance, providing excellent washability, low levels of adhesion of chemical solutions, etc., and excellent weather resistance.
  
  [Features]
  · Uses FEP (tetrafluoride ethylene-hexafluoride propylene copolymer) resin with excellent chemical resistance.
  · Manufactured in a clean room. Tube ends are capped and sealed. Shipped in heat-sealed packaging.
  · Cleaning performance is excellent, and adhesion of chemical solutions, etc. is very low.
  · Can be used with the "Chemifit C1 series" clean PushOne fitting .
  · This is a tube with small secular change and excellent weather resistance.
  · Can be used in an ozone atmosphere, etc.
  · Health, Labor and Welfare Ministry Notification No. 201 (2006

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	99.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube en résine polyoléfine pour plomberie propre (flexible) PL

  NITTA

  [Features]
  · A clean tube suitable for equipment and applications with fluids such as clean air, N2 gas, pure water, and various chemicals fluids.
  · Environmentally friendly eco-type tube.
  · Only carbon dioxide generated when it is incinerated (750°C); no toxic gases such as nitrogen oxides (Nox) and sulfur oxides (Sox) are produced. No dioxin is generated at all.
  · Manufactured in a clean room. Tube ends are capped and sealed. Shipped in heat-sealed packaging.
  · Special polyolefin resin with high water barrier performance and flexibility.
  · Low cost compared to fluorocarbon resin tubes.
  · Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.08 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube en résine polyoléfine pour plomberie propre (super flexible) PN

  NITTA

  Environmentally friendly polyolefin resin tube PN is a device for making clean air and N2 gas, pure water, various chemicals into fluids.
  
  [Features]
  · This is a device for making clean air and N2 gas, pure water, various chemicals into fluids and clean tube adapted for use.
  · Environmentally friendly eco-type tube.
  · Only carbon dioxide generated when it is incinerated (750°C); no toxic gases such as nitrogen oxides (Nox) and sulfur oxides (Sox) are produced.
  · No dioxin generated at all.
  · Manufactured in a clean room. Tube ends are capped and sealed. Shipped in heat-sealed packaging.
  · Excellent moisture barriers, and special polyolefin is used with even better flexibility than PL tubes.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	23.47 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tuyau FEP Yodo-Fluoron (polymère fluoré)

  YODOGAWA HU-TECH

  A fluororesin polymer (FEP) tube. Excels in permeation resistance.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	83.49 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  TOMBO N° 9003 NAFLON, tube PTFE

  NICHIAS

  Fluororesin (PTFE) tube. Excellent chemical resistance, heat resistance, and weatherproof performance.
  
  [Features]
  · Chemical permeation is minimal (reduced to approximately 60% of PFA-HG (measured with hydrochloric acid, nitrogen, and oxygen)).
  · The amount of permeation for a PFA-HG tube is reduced to approximately 50% that of a standard PFA tube (HCl comparison).
  · Elution of fluorine ions is minimal (equivalent to a PFA-HG tube).
  · The inner surface of the tube is smooth (Equivalent to a PFA-HG tube).

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	43.29 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube TOMBO n° 9003-BT NAFLON BT

  NICHIAS

  Tube with superior flexibility and transparency which employs a single type of fluorine resin. Suitable for use for piping in narrow spaces.
  
  [Features]
  · Bends easily and thus is not prone to buckling even when the turning radius is tight.
  · More transparent than normal PTFE tubes.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	135.42 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Tube résistant aux projections JUNFLON (tube pour appareil de soudage par points) JUNFLON SP4 (tube résistant aux projections double couche)

  JUNKOSHA

  By using a double tube with overlapped special resins that are flame resistant, sparks can be prevented. High flexibility, with excellent weather and water resistance.
  
  [Features]
  ▪ Standard colors: black, red, blue, green, white, yellow, light beige, light red, light green (yellow, light beige, light red, light green with a 100-m roll only).
  ▪ The equipment can be implemented as a piping tube of spot welded equipment where noncombustible resin (exact UL94V-0) is used in the outer layer.
  ▪ By using the exclusively applied stripper (that comes with tube cutter), it is possible to insert the equipment into the Junlon one-touch fitting W series and it is also possible to detach the speedy outer layer that complies with the infixing.
  ▪ Moreover, the pitch of the infixing in the outer layer is displayed and the length of its detachment is easily visible.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	69.11 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Tube résistant aux projections JUNFLON (tube pour appareil de soudage par points) JUNFLON SPF (tube résistant aux projections triple couche)

  JUNKOSHA

  Exhibits excellent durability against sparks and shocks generated from welding equipment. High flexibility, and with excellent weather and water resistance.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	122.48 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Tube JUNFLON (tube en polymère fluoré) Tube JUNFLON FT (tube spiralé en polymère fluoré PFA)

  JUNKOSHA

  [Features]
  ·A fitting with a superior heat/low-temperature resistance.
  · Non-load continuous operating temperatures: PFA < -65–260℃/FEP < -65–200℃.
  · Inert to most of chemicals and solvents.
  · This fitting has superior weather resistance and resistance to ageing.
  · Adhesion-resistant and easy to keep clear.
  · Flame retardant.
  · Superior electrical characteristics.
  · No risk of toxic substance elution.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	51.00 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube JUNFLON PFA haute barrière

  JUNKOSHA

  A hybrid tube that uses a fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer. The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
  
  [Features]
  · A fluoropolymer tube with superior barrier properties.
  · A hybrid tube that uses fluoropolymer PFA in the inner layer and the barrier properties of fluoropolymer in the outer layer.
  · The wetted inner layer using semiconductor PFA, has high basic characteristics (purity, chemical/heat resistance, and antiadhesion) in semiconductor piping applications .
  · The barrier properties of the fluoropolymer is superior to the barrier properties of the acids (hydrochloric acid, nitric acid, etc.) and ammonia.
  · Suppresses the permeation of acids in comparison to conventional PFA tubing.
  · Reduces adverse environmental impacts on the wider environment.
  · The transparency of the fluid can be maintained over a long period of time.
  · The mechanical properties are equivalent to a conventional PFA tubing.
  · This product is manufactured from raw material input to the molding and packaging in a consistently managed clean environment.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	56.78 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• 

  JUNRON A (tube en nylon) JUNRON AC1 (tube de contrôle en nylon souple)

  JUNKOSHA

  Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Excels in heat and low temperature resistance. High flexibility. Excels in oil resistance and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	243.29 €
  Délai d'expédition minimum ：	12 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON A (tube en nylon) JUNRON AS1 (tube en nylon souple, série en pouces)

  JUNKOSHA

  Excellent mechanical strength, as well as pressure, wear resistance, and flexural fatigue resistance. Excels in heat and low temperature resistance. High flexibility. Excels in oil and chemical resistance (especially alkaline resistance). No risk of toxic substances being released.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	11.97 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON A (tube en nylon) JUNRON AS1 (tube en nylon souple, série métrique)

  JUNKOSHA

  [Features]
  · Excellent mechanical strengths (especially, pressure resistance, wear resistance and bending fatigue tolerance).
  · Product has superior low temperature and heat resistance properties.
  · Highly flexible.
  · Product has superior oil resistance and chemical resistance properties (especially alkali resistance).
  ▪ No risk of toxic substances being released.
  ▪ It is light in weight and has excellent workability

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.97 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  JUNRON AT (tube en spirale en nylon) JUNRON AT1 (tube en spirale en nylon souple)

  JUNKOSHA

  A soft or ultra-soft nylon tube is formed into a coil, producing superior spring properties. Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Light with superior workability.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.22 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON AT (tube en spirale en nylon) JUNRON AT4 (tube en spirale en nylon ultra souple)

  JUNKOSHA

  A soft or ultra-soft nylon tube is formed into a coil, producing superior spring properties. Mechanical strength, in particular pressure resistance, wear resistance, flexural fatigue resistance is excellent. Light with superior workability.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	32.12 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  JUNRON U (tube en polyuréthane) JUNRON UF (tube en polyuréthane pour raccords crantés)

  JUNKOSHA

  Mechanical strength, in particular wear resistance is excellent.
  
  [Features]
  · Excellent mechanical strengths (especially, pressure resistance and wear resistance).
  · Product has superior low temperature and heat resistance properties.
  · Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
  · Flexible and high impact resilience rate.
  · No risk of poisonous substances being released.
  · Minimum bending radius. Excellent workability.
  · *If you need water resistance, use Junlon UF.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.97 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  JUNRON U (tube en polyuréthane) JUNRON UF (micro-tube en polyuréthane)

  JUNKOSHA

  Features superior mechanical strength, including wear resistance. Excels in heat and low-temperature resistance. Flexible, with high impact resilience.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	95.70 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON UF (tube en polyuréthane souple résistant à l'eau)

  JUNKOSHA

  Excellent mechanical strength and wear resistance.
  
  [Features]
  · Excellent mechanical strength and pressure/wear resistance.
  · Excellent performance at low and high temperatures.
  · Resin continuous no-load operation temperature range: -40 ~ +80°C.
  · Flexible and with a high impact resilience rate.
  · No risk of poisonous substances being released.
  · Minimal bending radius. Excellent workability.
  · *For water resistance, please use Junlon UF.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	19.72 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON UFL (tube en polyuréthane résistant à l'usure)

  JUNKOSHA

  Mechanical strength, and wear resistance in particular, is excellent. Excels in heat and low temperature resistance. Flexible, with high impact resilience.
  Note: Use Junron UF when water resistance in particular is required.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	24.46 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON UH (tube en polyuréthane souple)

  JUNKOSHA

  [Features]
  · Excellent mechanical strengths (especially, pressure resistance and wear resistance).
  · Product has superior low temperature and heat resistance properties.
  · Temperature range of resin for continuous operation without load: -40°C ~ +80°C.
  · Flexible and high impact resilience rate.
  · No risk of poisonous substances being released.
  · Minimum bending radius. Excellent workability.
  Note: Use Junron UF when water resistance is required.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	16.87 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  JUNRON U (tube en polyuréthane) JUNRON US (tube en polyuréthane ultra souple)

  JUNKOSHA

  Features superior mechanical strength, including wear resistance. Excels in heat and low-temperature resistance. Flexible, with high impact resilience.
  Note: Use Junron UF if water resistance is required.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	27.60 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Tube hybride JUNRON (tube avec couche interne en polymère fluoré) JUNRON AP1

  JUNKOSHA

  The two-layer structure achieves higher levels of flexibility, kink resistance and wear resistance. Fluoride polymer for the inner layer provides superior repelling power against liquid chemicals. Layers are fully adhered because it is integrally molded.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	84.84 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Tube hybride JUNRON (tube avec couche interne en polymère fluoré) JUNRON UP1

  JUNKOSHA

  The 2-layer structure achieves higher levels of flexibility, kink resistance and wear resistance. Fluoride polymer for the inner layer provides superior repelling power against liquid chemicals. Layers are fully adhered because it uses integral molded.

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	83.29 €
  Délai d'expédition minimum ：	10 jours

  *Prix unitaire/configuration de base

• 

  Flexibles en spirale en uréthane TRUSCO

  TRUSCO NAKAYAMA

  Fold-resistant and superior in abrasion resistance.

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	29.32 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Pour tubes à revêtement résistant aux éclats

  NIHON PISCO

  • Remise sur volume

  Sélectionner et comparer

  Configurer maintenant
  à partir de∗ ：	56.14 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

Loading...