GANTER Doigts diviseurs（Page 2）
Affiner la recherche en précisant Type
-
Bouton standard -
Type de levier -
Avec bague -
Composants associés -
Sans bouton -
Boutons spéciaux
?* À propos du délai d'expédition et des prix
-
- En promotion
Indexing plungers for thin walled equipment
GANTER
Indexing plungers GN 607.2 have been developed for installation in thin walled equipment.
It has to be taken into consideration that, depending on the mounting plate thickness 's', the protruding plunger length 'l1' and the position of the hexagon nut on its centre bush, the plunger nose might not always be fully retractable.
For design reasons the positional accuracy of this indexing plunger is not as precise as plunger GN 607.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 17.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers for welding, with rest position
GANTER
Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.
A notch keeps the plunger in this position.
The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.
The lug d2 is intended for positioning.
The plastic knob with the in-moulded indexing pin is driven on after the welding process.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 15.66 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Indexing plungers with red knob
GANTER
Indexing plungers GN 817.1 (Type C) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.42 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers without thread, Steel / Plastic knob
GANTER
Indexing plungers GN 618 without thread are for applications where welding, resin bonding (Loctite) or clamping is favoured.
Type G has been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), additional information can be submitted on request.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 8.66 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, removable
GANTER
Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.82 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel / plastic knob
GANTER
Type G or GK of the indexing plungers GN 613 have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 11.28 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Stainless Steel-Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 23.32 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Stainless Steel / Plastic-knob
GANTER
Stainless Steel-Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low Stainless Steel-Lock nuts GN 909.5 enlarge the mounting options.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 15.32 € Délai d'expédition minimum ： 3 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel
GANTER
GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 6.42 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel / long Plastic-knob
GANTER
Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 9.70 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, Steel / plastic knob
GANTER
Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 7.60 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 607.1 are distinguished for their small dimensions. The extremely low Stainless Steel-Lock nuts GN 909 enlarge the mounting options. The locking tab is an integral part of the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.62 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel / Plastic-knob
GANTER
Indexing plungers GN 607 are distinguished for their small dimensions.
The extremely low lock nuts GN 909 enlarge the mounting options.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.46 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 4.08 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Indexing plungers, with rest position, Plunger Stainless Steel
GANTER
Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
Indexing plungers GN 608.6 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 11.80 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Key for locking plungers
GANTER
For locking plungers GN 816.1 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816.1-10.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 1.72 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Key for locking plungers
GANTER
For locking plungers GN 816 with operation with key (Type B / BK) this key is required to move the plunger. Locking plungers Ø 6 and 8 have the same key GN 816-10.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 7.70 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Locking plungers, Plunger retracted
GANTER
If not operated, the plunger of the locking plungers GN 816.1 is retracted. To move out, move against the spring force and hold in the end position by turning by 90°.
The shape of the cam curve secures the plunger against accidental operation.
When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 19.92 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Locking plungers, PUSH-PUSH locking mechanism
GANTER
The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.
This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).
Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.76 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers Zinc die casting / Plastic-knob
GANTER
Mini indexing plungers GN 822.8 are distinguished for their small dimensions. They are mounted by countersunk screws.
The mini indexing plungers present an affordable alternative to the GN 608 and GN 608.1 indexing plungers.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 6.24 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers, covered indexing mechanism
GANTER
Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
With Type C the knob can be turned by 30° and a notch keeps the knob in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.36 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Mini indexing plungers, open indexing mechanism, with red knob
GANTER
Mini indexing plungers GN 822.1 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
Type C with rest position is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 5.40 € Délai d'expédition minimum ： 4 jours *Prix unitaire/configuration de base
-
- En promotion
Mini indexing plungers, Stainless Steel / Plastic knob
GANTER
Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 6.46 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Screw drivers for GN 613
GANTER
Screw drivers for GN 613- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 10.32 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Spring bolts, Stainless Steel / Plastic knob
GANTER
The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.50 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Spring bolts, Steel / Plastic knob
GANTER
The plunger of the spring bolts GN 313 does not protrude in the inoperative position.
It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 9.38 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Spring latches with flange for surface mounting
GANTER
Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 13.78 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Stainless Steel-Cam action indexing plungers for welding
GANTER
Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 25.90 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Cam action indexing plungers, with locking function
GANTER
For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 22.30 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Cam action indexing plungers, without locking function
GANTER
For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 22.20 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers
GANTER
The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 19.62 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers
GANTER
Stainless Steel-Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 30.50 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without r
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 4.38 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Mini indexing plungers
GANTER
Stainless Steel-Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type CN, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.56 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
- En promotion
Stainless Steel-Mini indexing plungers, with and without rest position
GANTER
Stainless Steel-Mini indexing plungers GN 822.9 are distinguished for their small dimensions. They are mounted by countersunk screws.
The Stainless Steel-Mini indexing plungers present an affordable alternative to the GN 608.5 and GN 608.6 Stainless Steel-Indexing plungers.
In types C and CN, the button can be turned by 30° after retracting the indexing pin, holding it in the "retraced" position using the indexing lock.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 14.38 € Prix spécial Délai d'expédition minimum ： Jour même *Prix unitaire/configuration de base
-
Stainless Steel-Spring latches for welding
GANTER
Stainless Steel-Spring latches GN 722.1 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
The square bar allows the latch to be welded in any desired position. To prevent excessive heating up and the resulting change in the spring properties, fixing with welding spots is recommended.
Stainless Steel-Spring latches GN 722.1 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.- Remise sur volume
- Fichiers CAD 2D / 3D disponibles
à partir de∗ ： 28.38 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 20.60 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 84.62 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
Doigts d’indexage en acier inoxydable, version hygiénique côté broche (hygiène complète)
GANTER
- Remise sur volume
à partir de∗ ： 111.60 € Délai d'expédition minimum ： 7 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 16.66 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 12.72 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 24.86 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
-
à partir de∗ ： 26.48 € Délai d'expédition minimum ： 12 jours *Prix unitaire/configuration de base
| Marque |
|---|
| Série du produit |
| CAD |
| à partir de∗ |
| Délai d'expédition minimum ： |
| Type |
| Mécanisme de verrouillage |
| Méthode de montage |
| Longueur totale |
| Matériau du corps |
| Tout inoxydable |
| Matériau de l'embout |
| D.E. du corps / filetage M(mm) |
| Course S(mm) |
| Traitement de surface d'embout |
| Traitement thermique de l'embout |
| D.E. de l'embout d(Ø) |
| Longueur L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Marque | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Série du produit | Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit | Indexing plungers, with rest position, Plunger Stainless Steel | Mini indexing plungers, open indexing mechanism, with red knob | Stainless Steel-Cam action indexing plungers, with locking function | Stainless Steel-Cam action indexing plungers, without locking function | Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without r | Stainless Steel-Mini indexing plungers, with and without rest position | Doigts d’indexage en acier inoxydable, version hygiénique côté broche (hygiène complète) | |||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| à partir de∗ | 17.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 15.66 € *Prix unitaire/configuration de base Remise sur volume | 10.42 € *Prix unitaire/configuration de base Remise sur volume | 8.66 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 14.82 € *Prix unitaire/configuration de base Remise sur volume | 11.28 € *Prix unitaire/configuration de base Remise sur volume | 23.32 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 15.32 € *Prix unitaire/configuration de base Remise sur volume | 6.42 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 9.70 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 7.60 € *Prix unitaire/configuration de base Remise sur volume | 13.62 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 10.46 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 4.08 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 11.80 € *Prix unitaire/configuration de base Remise sur volume | 1.72 € *Prix unitaire/configuration de base Remise sur volume | 7.70 € *Prix unitaire/configuration de base Remise sur volume | 19.92 € *Prix unitaire/configuration de base Remise sur volume | 14.76 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 6.24 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.36 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 5.40 € *Prix unitaire/configuration de base Remise sur volume | 6.46 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 10.32 € *Prix unitaire/configuration de base Remise sur volume | 13.50 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 9.38 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 13.78 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 25.90 € *Prix unitaire/configuration de base Remise sur volume | 22.30 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 22.20 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 19.62 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 30.50 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 4.38 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 14.56 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 14.38 € Prix spécial *Prix unitaire/configuration de base En promotionRemise sur volume | 28.38 € *Prix unitaire/configuration de base Remise sur volume | 20.60 € *Prix unitaire/configuration de base Remise sur volume | 84.62 € *Prix unitaire/configuration de base Remise sur volume | 111.60 € *Prix unitaire/configuration de base Remise sur volume | 16.66 € *Prix unitaire/configuration de base Remise sur volume | 12.72 € *Prix unitaire/configuration de base Remise sur volume | 24.86 € *Prix unitaire/configuration de base Remise sur volume | 26.48 € *Prix unitaire/configuration de base Remise sur volume |
| Délai d'expédition minimum ： | Jour même | 7 jours | 7 jours | Jour même | 7 jours | 3 jours | Jour même | 3 jours | Jour même | Jour même | 7 jours | Jour même | Jour même | Jour même | 7 jours | 7 jours | 7 jours | 7 jours | Jour même | Jour même | Jour même | 4 jours | Jour même | 7 jours | Jour même | Jour même | Jour même | 7 jours | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | Jour même | 12 jours | 12 jours | 7 jours | 7 jours | 12 jours | 12 jours | 12 jours | 12 jours |
| Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Mécanisme de verrouillage | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Méthode de montage | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Longueur totale | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau du corps | Acier | Acier | - | - | - | Acier inoxydable | Acier inoxydable | Acier inoxydable | Acier | - | - | Acier | Acier | Acier | - | - | - | - | - | - | Acier / Acier inoxydable | Acier / Acier inoxydable | - | - | - | - | Acier inoxydable | Acier inoxydable | - | - | Acier inoxydable | Acier inoxydable | Acier inoxydable | - | - | Acier inoxydable | - | - | - | - | - | - | - |
| Tout inoxydable | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Matériau de l'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. du corps / filetage M(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Course S(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement de surface d'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Traitement thermique de l'embout | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| D.E. de l'embout d(Ø) | 6 ～ 8 | 6 ～ 8 | 6 ～ 10 | 5 ～ 8 | 7 ～ 10 | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 4 ～ 10 | 4 ～ 12 | 5 ～ 10 | 6 ～ 8 | 6 ～ 8 | 3 ～ 10 | 6 ～ 8 | - | - | 6 ～ 8 | 6 ～ 8 | 4 ～ 10 | 4 ～ 7 | 4 ～ 7 | 4 ～ 10 | - | 5 ～ 10 | 5 ～ 10 | 8 ～ 14 | - | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 5 ～ 10 | 3 ～ 10 | 4 ～ 10 | 4 ～ 10 | - | - | - | - | - | - | - | - |
| Longueur L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filtrer par:
Stock
-
- Stock Items Included
Affiner la recherche en précisant les spéc./dim.
-
Mécanisme de verrouillage
-
Non fourni
-
Avec verrouillage
-
Sans verrouillage
-
Non fourni
-
Méthode de montage
- À visser
- Ajustement forcé
- Montage par boulon
- Autres
- Embase
-
Longueur totale
- Standard
- Court
-
Matériau du corps
- Acier
- Acier inoxydable
- Zinc moulé sous pression
- Autres
-
Tout inoxydable
- Applicable
- Non conforme
-
Matériau de l'embout
- Acier
- Acier inoxydable
-
D.E. du corps / filetage M(mm)
-
Course S(mm)
-
Traitement de surface d'embout
-
Traitement thermique de l'embout
-
D.E. de l'embout d(Ø)
-
Longueur L(mm)
Affiner la recherche en spécifiant le fabricant
-
- MISUMI (19)
- NORELEM (183)
- KIPP (142)
- GANTER (88)
- HALDER (37)
- NABEYA BI-TECH (24)
- KONISHI MFG (19)
- ELESA (4)
- NABEYA (1)
- TOSHIN CASTER (1)
Affiner la recherche en précisant le type de données CAO
-
- 2D
- 3D
Affiner la recherche en précisant le délai
-
- Tous les articles
- Jour même
- 2 jours ou moins
- 3 jours ou moins
- 4 jours ou moins
- 5 jours ou moins
- 6 jours ou moins
- 7 jours ou moins
- 8 jours ou moins
- 9 jours ou moins
- 11 jours ou moins
Catégories relatives à « Doigts diviseurs »
Mode de paiement
Fabrication à la demande
Certificats
Copyright © MISUMI Corporation All Rights Reserved.