TRUSCO NAKAYAMA Clés à six pans

?* À propos du délai d'expédition et des prix

• 

  « Clé hexagonale de torsion » (courbée vers côté et angle opposés)

  TRUSCO NAKAYAMA

  [Features]
  · Since the underneck has a short design, the wrench can be easily inserted into and taken out of places where there is very little space above the bolt.
  · The double-ended wrench has opposite-side bending and opposite-angle bending on each end, making it ideal for places with narrow openings. (Available with the range of 30°)
  · The hardness is HRC 53-57.
  · Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	6.23 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale, Cr-V

  TRUSCO NAKAYAMA

  [Features]
  · Made of chrome vanadium steel (Cr-V).
  · The hardness is HRC 50-58.

  • Remise sur volume

  à partir de∗ ：	0.91 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  « Clé de torsion multifonction courte » (courbée vers côté et angle opposés)

  TRUSCO NAKAYAMA

  [Features]
  · Both ends are bent toward the opposite side and opposite corner, and it is possible to use at swing angle 30°.
  · It is useful for working in a small place where the space for rotating a hex wrench cannot be secured adequately.
  · The hardness is HRC 53-57.
  · Made of general chrome vanadium steel.
  · Short type torsion wrench TTX-9S.
  [Applications]
  · Tightening of screws in narrow spaces.

  • Remise sur volume

  à partir de∗ ：	6.66 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Made of chrome vanadium steel (Cr-V).
  · This product has black oxide surface processing.
  · The hardness is HRC 52-56.

  • Remise sur volume

  à partir de∗ ：	6.32 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique (longue, tige courte)

  TRUSCO NAKAYAMA

  [Features]
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
  · Matte chrome plating.
  · The hardness is HRC 55-60.

  • Remise sur volume

  à partir de∗ ：	6.43 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique【8 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is considered to fit the corners of the bottom of the hex socket for closer contact.
  · The hardness is HRC 54-59.
  · Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	67.29 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique (longue)【1-8 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Easily catches screws, allowing them to be quickly and easily fastened without wasted time.
  · The hardness is HRC 54-59.
  · Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	6.45 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique, longue, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Long type that allows users to easily exert force.
  · Made of chrome vanadium steel (Cr-V).
  · This product has black oxide surface processing.
  · The hardness is HRC 52-56.

  • Remise sur volume

  à partir de∗ ：	6.62 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé à six pans creux avec tête sphérique (revêtement en oxyde noir)【9-12 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Holder can be rotated to easily take out and put back different sizes of hex wrenches.
  · This product has black oxide surface processing.
  · The hardness is HRC 52-56.

  • Remise sur volume

  à partir de∗ ：	41.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique (courte)

  TRUSCO NAKAYAMA

  [Features]
  · Holder can be rotated to easily take out and put back different sizes of hex wrenches.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-58.

  • Remise sur volume

  à partir de∗ ：	3.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, à tête sphérique (9 pièces)【9 pièces par conditionnement】

  TRUSCO NAKAYAMA

  [Features]
  · Each surface of the edge of the Allen wrench tip is evenly chamfered. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact.
  · Matte chrome plating.
  · The hardness is HRC 52-56.

  • Remise sur volume

  à partir de∗ ：	50.31 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique, avec bille de maintien

  TRUSCO NAKAYAMA

  [Features]
  · Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
  · A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
  · It has a diagonal curve.
  · The hardness is HRC 53-57.
  [Applications]
  · Tightening of screws in narrow spaces.

  • Remise sur volume

  à partir de∗ ：	78.46 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé longue, hexagonale, à tête sphérique, avec bille de maintien

  TRUSCO NAKAYAMA

  [Features]
  · Since the neck length is approximately 1/2 the standard type, it can be used for working in narrow places.
  · A ball point type with catcher ball on the tip, which boasts excellent workability in narrow places. (3 mm or more)
  · The hardness is HRC 53-57.
  [Applications]
  · Tightening of screws in narrow spaces.

  • Remise sur volume

  à partir de∗ ：	105.94 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, col court, 100°, à tête sphérique, longue, avec bille de maintien

  TRUSCO NAKAYAMA

  [Features]
  · In order to prevent fingertips from touching the work surface, the bend angle is increased from the conventional 90° to 100° for better usability.
  · Made from chrome vanadium steel.
  · The length in the short direction is set to approximately half the conventional standard, extremely effective for working in confined spaces.
  · Equipped with a catcher ball at the tip (3 mm or more).
  · The hardness is HRC 53-57.
  [Applications]
  · Tightening and loosening work for hex socket bolts and hex socket set screws.

  • Remise sur volume

  à partir de∗ ：	127.56 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique (tige courte)

  TRUSCO NAKAYAMA

  [Features]
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
  · Matte chrome plating.
  · The hardness is HRC 55-60.

  • Remise sur volume

  à partir de∗ ：	53.50 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé tige longue, hexagonale, à tête sphérique

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for fastening in deep places.
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.
  · Matte chrome plating.
  · The hardness is HRC 55-60.
  · Ideal for fastening in deep places.
  · High-torque, tough nickel-chrome-molybdenum steel has been used.
  · Holder can be rotated to easily take out and put back different sizes of wrenches.

  • Remise sur volume

  à partir de∗ ：	6.63 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale, poignée en T, à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Suitable for machine maintenance and maintenance repair work.
  · Can be used with one side of the ballpoint portion tilted 25°.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · Suitable for machine maintenance and maintenance repair work.

  • Remise sur volume

  à partir de∗ ：	8.92 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, poignée en T, à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · Suitable for machine maintenance and maintenance repair work.
  · Can be used with one side of the ballpoint portion tilted 25°.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · Suitable for machine maintenance and maintenance repair work.

  • Remise sur volume

  à partir de∗ ：	10.07 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, poignée en T, à tête sphérique, brunie

  TRUSCO NAKAYAMA

  [Features]
  · It can be set as a stand and can be hung from a wall using a hook hole.
  · Suitable for machine maintenance and maintenance repair work.
  · Can be used with one side of the ballpoint portion tilted 25°.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · Suitable for machine maintenance and maintenance repair work.

  • Remise sur volume

  à partir de∗ ：	82.37 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, à tête sphérique, poignée en T

  TRUSCO NAKAYAMA

  [Features]
  · T handle type 2-point fastening type.
  · The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach.
  · The hardness is HRC 45-57.

  • Remise sur volume

  à partir de∗ ：	8.78 €
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale

  TRUSCO NAKAYAMA

  [Features]
  · Use the shorter end and hold the longer end to tighten with greater force. Use the longer end and hold the shorter end to handle the product to tighten at greater rotating speed.
  · The hardness is HRC 54-59.
  · Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	2.31 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale (courte)

  TRUSCO NAKAYAMA

  [Features]
  · Both ends are chamfered which makes it easy to insert into hex sockets.
  · Stable quality is provided by excellent heat treatment.
  · Cationic electrodeposition coating for sizes of 8 mm or above keeps hands clean.

  • Remise sur volume

  à partir de∗ ：	46.48 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale (courte)

  TRUSCO NAKAYAMA

  [Features]
  · Made of chrome vanadium steel (Cr-V).
  · The hardness is HRC 50-58.

  • Remise sur volume

  à partir de∗ ：	1.01 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale (type T)

  TRUSCO NAKAYAMA

  [Features]
  · Convenient for attachment/removal of hex socket bolts mounted in deep places.
  · T-shaped handle is easy to grasp.
  · This product has black oxide surface processing.
  · The hardness is HRC 50-57.
  [Applications]
  · For tightening and loosening hex socket bolts.

  • Remise sur volume

  à partir de∗ ：	6.64 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale à tête sphérique

  TRUSCO NAKAYAMA

  Each surface of the edge of the Allen wrench tip is evenly chamfered. Compared to the standard product, it features outstanding high torque, durability, and abrasion resistance. Insertion into hex sockets has become easier than ever, and in addition, the chamfered angle is designed to fit the corners of the bottom of the hex socket for closer contact. Matte chrome plating.

  • Remise sur volume

  à partir de∗ ：	8.19 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale, à tête sphérique, acier inoxydable (standard)

  TRUSCO NAKAYAMA

  A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant.

  • Remise sur volume

  à partir de∗ ：	6.15 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, à tête sphérique, acier inoxydable (standard)【9 pièces par conditionnement】

  TRUSCO NAKAYAMA

  A ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.

  • Remise sur volume

  à partir de∗ ：	79.85 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, à tête sphérique, acier inoxydable (longue)【9 pièces par conditionnement】

  TRUSCO NAKAYAMA

  A long ballpoint L type wrench made of stainless steel and featuring outstanding corrosion resistance, chemical resistance, and shock resistance. A ballpoint type that can be used at an approximately 25° slant. Holder can be rotated to enable each differently sized wrench to be taken out and put back easily.

  • Remise sur volume

  à partir de∗ ：	101.53 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• • En promotion

  

  Clé hexagonale à tête sphérique (taille en pouces)

  TRUSCO NAKAYAMA

  Machined with a ball point, it can be used tilted by approximately 25°, speeding up temporary tightening of bolts, and increasing workability. Black oxide treated. Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	1.63 €
  	Prix spécial
  Délai d'expédition minimum ：	Jour même

  *Prix unitaire/configuration de base

• 

  Clé hexagonale, poignée en T, à tête sphérique

  TRUSCO NAKAYAMA

  T handle type 2-point fastening type. The ball point part can be tilted to one corner at angle of 25° and the tool shows its strength when working in confined areas which are normally out of reach. Hardness is HRC 55 to 60. Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	101.53 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale (taille en pouces)

  TRUSCO NAKAYAMA

  Both ends are chamfered which makes it easy to insert into hex sockets. Stable quality is provided by excellent heat treatment. The surface features a black oxide finish. Made from chrome vanadium steel.

  • Remise sur volume

  à partir de∗ ：	3.36 €
  Délai d'expédition minimum ：	7 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales en L, tête sphérique

  TRUSCO NAKAYAMA

  [Features]
  · It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
  · The special processing technology provides high durability and abrasion resistance.
  · Final tightening can also be performed with the ball point part.
  

  • Remise sur volume

  à partir de∗ ：	88.64 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Clé hexagonale en L, tête sphérique

  TRUSCO NAKAYAMA

  [Features]
  · It is a hexagonal bar wrench rotated by 30° with consideration for ease of use.
  · The special processing technology provides high durability and abrasion resistance.
  · Final tightening can also be performed with the ball point part.
  

  • Remise sur volume

  à partir de∗ ：	7.02 €
  Délai d'expédition minimum ：	9 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales (en pochette)【16 pièces par conditionnement】

  TRUSCO NAKAYAMA

  • Remise sur volume

  à partir de∗ ：	141.46 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

• 

  Jeu de clés hexagonales, tête demi-sphérique (demi-longues)

  TRUSCO NAKAYAMA

  [Features]
  · The tip of the short side has undergone half ball point processing. The approach to the hex sockets is easier than the conventional product as a half ball is used.
  · Half ball finish allows achievement of easy insertion and the same level of torque transferability.
  · The screw can be turned from a maximum slope degree of 32°.
  · It utilizes high-quality special alloy chrome vanadium steel (SNCM20V).
  · In order to ensure homogeneous and highly accurate tempering (heat treatment) hardness (HRC 60° ±1°), a continuous furnace was intentionally not used, while a sealed-quench furnace / non-oxidizing, decarburizing correction quenching method has been adopted.
  · The surface processing of special chrome plating exerts excellent wear resistance and prevents rust over a long period of time.
  · Final tightening can be performed with a ballpoint wrench by using the pipe handle.
  · Partial painting is done so that the size can be distinguished at a glance based on color.

  • Remise sur volume

  à partir de∗ ：	98.62 €
  Délai d'expédition minimum ：	6 jours

  *Prix unitaire/configuration de base

Loading...